good quality GSM security home alarm system
Main Features:
1. Indicate lights show GSM signal status to find the best control panel place position.
2. control panel is compatible 1527&2262 chip detectors(2262 chip remote controller, 1527 chip PIR, etc) in the same zone.
3. SMS program without any keypad.
4. Anti attack zone, the system auto dial and sms alert to preset phone numbers without active the siren.
5. Record 10 seconds voice message. The voice message can be the alarm address, etc
6. Auto-dial six phone numbers and send text messages when system is activated.
7. Listen in what happens in the spot remotely.
8. Two way intercom function remotely via phone.
9. 8 intelligent wireless zones, which can code 160pcs wireless detectors in total. And the quantity of wireless detectors coded to each zone is unlimited.
10. 4 intelligent wired zones automatically recognize the wired detectors.
11. Each zone include the wired zones can set be the independent zone: Internal zone, the whole defensive zone, 24-hour emergency zone, Delay zone, Closed zone, Anti attack zone.
12. Use telephone or mobile phone remote control the system via input password to listen in, intercom, arm, disarm, switch on/off, etc.
13. Four-button wireless remote controller to Away arm, Home arm, Disarm, Emergency help. Users also can use our wireless intelligent keypad to control the system if the family has members or do not like taking remote controllers.
14. Build in one output relay, which can set be alarm linkage(can connect with another siren or siren with flash/strobe). The relay also can control home appliance: lights, airconditioner, cooker, etc.
15. Wired zone4 port can connect with wireless siren or horn.
16. SMS program. Users send their sms commands to the control panel then the panel will confirm the password and save the commands automatically. The LED light show you the commands whether are correct. If not, need try again.
17. Delay arm function: allow people have enough time to go out without activating the system.
18. Delay alarm function: allow people have enough time to enter the house without activating the system.
19. SMS informs users when electricity is off/on.
20. SMS informs users when the control panel is low voltage.
21. the control panel build in recharageable battery, so it will still work when electricity is off.
22. the control panel can support several sirens.
Technical parameters:
GSM control panel:
Operating voltage: DC12V
Average power: AC/DC
Wireless receiving sensitivity: -108db
Available wireless Frequency: 315/433MHz
Working Condition: Temperature ¨C25¡æ¡«+ 45¡æ
Humidity ¡Ü 90%Rh
Capacity for Wireless Device: 160pcs
Standard Package list of the GSM Alarm System:
Control panel X1
Remote contoller X2
Wireless PIR Motion Sensor X1
Wireless Door magnetic Sensor X1
Wired Mini Siren X1
GSM Antenna X1
AC/DC Adapter X1
User Manual X1
The users can add other sensors such as wireless password keypad, PIR, siren with flash/strobe, etc.
1.4kg per set
10 sets per carton
carton size:34cmx34cmx54cm.
1. Multi-language words menu WIFI + 3G/GSM+GPRS+SMS home alarm system
2.Android + IOS APP application easily control, Easy to give authorization.
3.Free charges through WiFi network. When there is no WIFI, the host will work with GPRS network. If there is neither WiFi nor GPRS network ,then the alarm host will send alarm SMS and make alarm call.
4.Work with IP camera, The IP camera APP embeds in the host APP.
Users can monitor what happen at home wherever and whenever.
5.Workable with 100pcs smart socket/wireless relay output to control simple home appliances. Relay outputs name and sockets name can be revised by users
6. 8 scene settings and 20 ifttt settings.
Advanced home automation functions for perfect smart home life.
7.Workable with RFID wireless keypad
8.10-20s Leaving message remotely in APP. Alarm speed is low 10s so that can inform users promptly.
9.Information push promptly when AC power lost or recovered or detectors in low voltage
10.Smart zone function: self-checking windows/doors status and chime reminds if door open
11.30 wireless defense zones, Zone names can be revised by users
With 2 wired zones for connecting wired sensors
Full touch keys, beautiful shape, external connect entrance guard
Sms 5 phones automatically while alarming and drive wiretap.
Call 5 phones automatically while alarming and drive wiretap, can clearly
Hear the voice.
Auto-dial 1 preset phone numbers of alarm center
Alarm panel with lcd display & keypad, easy to operate.
Sms alert & auto-dial alert when ac power outage, ac power recovered
With standby rechargeable battery. The host automatically stores system
Status, while its power is off.
With wired mic interface, switching the sound off and siren
BL-E99 is a home security anti-theft security system. It is burglar security alarm system which has 88 wireless can connect with other sensors like Magnetic door/window sensors, Smoke Detectors, gas detector, Infrared Sensors, remote control etc. in additional. When something happened in your home, the home wireless GSM alarm system can send the MMS to you. The wireless home safe alarm system compatible with all the GSM SIM cards, suitable for global users. arm/disarm each guarding zone independently, with 4 wired guarding zones for connecting wired sensors, Inform user if the power off via call/SMS, arm/disarm and program the system by control keyboard on the mainframe & phone .it is better choice for the user which doesn t need too much accessories.
Main Function
1.With 2 wired zones for connecting wired sensors
2.SMS 5 phones automatically while alarming and drive wiretap.
3.Call 5 phones automatically while alarming and drive wiretap, Can clearly hear the voice.
4.Auto-dial 1 preset phone numbers of Alarm Center
5.Alarm panel with LCD display & keypad, easy to operate.
6.SMS alert & auto-dial alert when AC Power outage, AC power recovered
7.with standby rechargeable battery. The host automatically stores system status, while its power is off.
8.With wired MIC interface, switching the sound off and siren
9.Talkback Function: can speak with field person.
10.arm/disarm and program the system by control keyboard on the mainframe & phone & SMS & Remote controller
11.Timing arm/disarm function.
12.record function: Maximum recording time:20S
13.voice function:support play the user record voice.
14.Built-in high standard Internal Antenna with strong signal
15.original host operating system.
16.Chinese/English switch supported
17.with ROHS/CE/FCC certifications,conform to 3C Safety Standard and GB12663-2001 government
18. It can support IP P2P camera
Standard Configuration:
1 X BL-E99 GSM control panel
1 X Wireless PIR motion detectors
1 X Wireless door/window magnetic sensor
2 X Wireless Remote controllers
1 X Mini siren with 110DB sounds
1 X Power adapter
1 X English user manual
1 X Brand new & neutral package box
WAVECOME GSM module.
10 wireless zones(1 wireless SOS zone, 1 wireless fire alarm zone, the other 8 wireless zones can be defined by user) and 1 external power failure alarm zone.
You can connect wireless emergency button, wireless PIR sensor, wireless door/window contact, wireless smoke detector, wireless gas leakage detector, wireless glass break sensor etc. Each wireless zone can match numberless wireless sensors.
With LCD display and Control keyboard on the mainframe.
Send SMS to 3 preset mobile phone numbers and Auto-dial 3 preset phone numbers while alarming.
You can listen what happened in the alarm area while alarming.
With AC power status monitor function and password protection function
With fixed time arming/partial arming/disarming function
Control the alarm system by Control keyboard ,remote control or SMS.
Modify 8 wireless zones¡¯ name and check the system status by SMS.
Define the 8 wireless zones as arm/partial arm by control keyboard on the mainframe.
Switch to Backup rechargeable battery when the power is failure or cut by intruder and send SMS.
Wireless Emergency function(24 hours zone):you can press the button to alarm immediately in order to get help if in emergencies.
Wireless signal transmission,and don't fear for cutting wire by the intruders.
Can send alarm signals to monitoring center through GSM network, such as the police station.
GSM frequency:
GSM900/1800MHZ
GSM850/900/1800/1900MHZ.
Name: gsm home alarm system-g60
Landline and gsm dual network communication, ( cdma netowk optional )
Ademco contact id through gsm
Main features:
6 group sms, landline and gsm dual network communication
Ademco contact id through gsm, ( cdma for optional )
Program the phone numbers directly on the panel
Lcd and blue back-up light
85 event log, interphone function
6 groups timed auto arm/disarm, away/stay arm optional
Every zone can be programmed seperately
Every detector can be set to doorbell when disarmed
Every remote can be set to request assistance siren on/off
Siren could be set to sound when away arming
Unique watchdog function, monitor the old, patient or important place.
Built in rechargable battery;built-in siren, and timer.
The NFS-3030 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in small to medium-sized fire protection systems and provides effective fire detection and alarm notification. The NFS-3030 features a compact design and advanced microprocessor technology, making it easy to install and program. The control panel supports up to 384 points and includes built-in communication options, such as analog dialer and network interfaces, for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, providing versatility and customization for specific fire protection needs. The NFS-3030 is a cost-effective and reliable fire alarm control panel from Notifier.
The NFS2-640 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in medium to large-scale fire protection systems and provides reliable fire detection and alarm notification. The NFS2-640 features a compact design and advanced microprocessor technology, allowing for easy installation and programming. The control panel supports up to 640 points and includes built-in networking capabilities for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, offering flexibility and customization for specific fire protection needs. The NFS2-640 is a feature-rich and reliable fire alarm control panel from Notifier.
Wireless security home alarm system(5120)
Description:
1, Wireless alarm system with digital screen and time display,
2, Home Alarm system built-in 120 wireless defence zones
3, Security alarm system with four groups of timer arm /disarm
4, Auto-dial 9 groups telephone number when alarming
Features:
1) Digital screen with time display, can set up 2 groups clocks alarm, and alarm time setting function.
2) Built-in 120 wireless defence zones, each zones with their unique usage support 8 types of defense zones.
3) Four groups of timer arm /disarm
4) Auto-dial 9 groups telephone number when alarming,
5) 10seconds customize message record, When the system calls out, it will play the voice message you recorded, which let you or other people know where alarm
6) Different place remote control function, arm/disarm /monitor by phone.
7) Wireless intelligent study coding, compatiable with PT2262, maximum 100PCS remote controller and 150PCS sensor.
8) With high accuracy clock chips, and punctual timing black box function, can record alarm history, 72 PCS arm/disarm records and 102PCS alarming history, also show when and where alarm
Specification:
Input voltage: DC9V-12V
Standby current: < 25mA
Alarm current: < 450 mA
Wireless frequency: 315/433/868/915MHz, 2262/1.5-4.7M, EV1527/300K
Back-up battery: NI-HI AAA*6 DC7.24V
Siren volume: 110dB
Accessories parameter: This burglar alarm can support both PT2262 and EV1527code. When use PT2262 code, timeing resistor is suggested 1.5M to 4.7M, If use EV1527 code, timing resistor is 300K. It is suggested to use 1010data code.
Standard package:
1 man panel,
1 infrared (motion) detector
1 wireless door magnetic detector
1 siren,
2 remote controllers,
1 power supply.
