This equipment is used for the preparation specimens for Marshall stability testing in compliance to BS 598 standard. The digital controlled marshall electric compactor is suitable for preparing bituminous mix specimens (dia. 101.6mm x 63.5mm) used in marshall stability testing. The trip mechanism is designed to make the hammer fall at the same distance for every stroke. With some features of digital control, compact times to be preset freely, auto counting and easy to operate etc.
This equipment can cold press the powdered and granular cast iron filings, steel filings, copper filings, aluminum filings, etc. directly into 3~6kg cylindrical briquettes for transportation, furnace throwing, and the whole process without heating-up, additives, or other processes. The density of cast iron filings can reach 5~6t/m3 after pressing.
The product can also adopt domestic or imported hydraulic and electrical components according to customers' requirements, with automatic feeding and weighing devices.
The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area.
Long Cylinder
Fits 240 Litre Bins
Stainless Steel Frame
Small Footprint (52 Cm2)
Densely Compacted Waste
Reduced Energy Consumption
Suitable for Kitchens & Food Preparation Areas
Product Overview
The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting.
Machine Size
Height (Mm) : 1970
Width (Mm) : 670
Depth (Mm) :704
Weight : 120 Kg
Bag Height (Mm) : 600 Mm
Bag Diameter (Mm) : 450 Mm
Weight of Full Bag : <50 Kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise Level : < 70 Db(a)
Pressure : 1500 Kg at 5 Bar
Approvals : Ce, as/nz 4024.1
Set Price : 4680.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper
Optional : Ompressor Mt1 B Hd :925.00 Eur
Extra Bags, 100l, 5 Boxes (500 Pcs. ) : 245.00 Eur
GREENMAX Styrofoam compactor Apolo-C100 can compact all kinds of EPS scraps and bulk EPS scarps into a compact size. The compactor machine can compact the volume of Styrofoam as 50:1. It i similar to make a laptop become a small key on the keyboard. And the compressed density of EPS scraps is 200-400kg/m3. The compact size of the EPS is easy to transport and store in a warehouse. Whatâ??s more, it is also applicable to materials including EPS, XPS, and PSP, like takeaway food containers and cups. The system of Styrofoam compactor A-C100 offers great convenience to you.
Whats more, ended up in landfills or sent to the ocean also can pollute the soil and water which is closely connected with us. So it is better for us to use a machine to compact the Styrofoam in order to make a recyclable circulation.
The GREENMAX Apolo C100 Polystyrene Compactor is the basic model of the Apolo series, it can compress bulky polystyrene waste into high-density blocks with a compaction ratio of 50: 1 . Compacted polystyrene foam is easy to store and transport. Applicable materials are EPS, XPS (extruded polystyrene) and PSP (polystyrene paper).
Solid and compact design allow uniform and correct compaction of Proctor and CBR sample.
Technical Specifications:
Hammer weight 2.5KG (300 mm / 12") and 4.5KG (450 mm / 18")
Hammer fall height(mm) 300mm and 450mm
Compaction cylinder mould Ã??101.6x176.40mm and Ã??152.00x177.00mm
Power 220V/380V ( choice)
Light weight compaction unit volume 593.2KJ/m3
Heavy weight compaction unit volume 2684.9KJ/m3
Compaction speed 30-32 time/minutes
Set hit count 0-99times( adjustable)
PET dewatering Poseidon series specializes in de-watering and compacting beverage bottles and packaging recycling. Poseidon dewater helps dry PP/PE film flakes after the cleaning line and helps screw out water in containers. Applicable materials: Beverage Bottles/Package/Cartons, Aluminum Cans, PP/PE films and Yogurt Cups.
Bottle Dewater machine Poseidon series specializes in de-watering and compacting beverage bottles and packaging recycling. Poseidon dewater helps dry PP/PE film flakes after the cleaning line, and helps screw out water in containers. Applicable materials: Beverage Bottles/Packages/Cartons, Aluminum Cans, PP/PE films, Yogurt Cups.
Ideal for small spaces and indoor environments, the X-Press 200S compactor is tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
Stainless steel
10:1 compaction
Improves security and safety
Low on noise, low on energy
Air-powered, clean and hygienic
Suitable for kitchens & offshore environments
Product Overview
The Mil-tek X-Press 200S stainless steel waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200S waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200S is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200S is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
Machine size
Height (mm) : 2025
Width (mm) : 810
Depth (mm) : 779
Weight : 150 kg
Bag height (mm) : 600
Bag diameter (mm) : 570
Weight of full bag : <60 kg
Material : General / Kitchen Waste
Degree of Compression ; < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE, AS/NZ 4024.1
SET PRICE : 4800.00 EUR
In set included:
XP100S COMPACTOR
1 BOX BAGS 200L (100 PCS./BOX)
1000 PCS.WIRE TIES
WIRE TIE TWISTER/STRAPPER
OPTIONAL:
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 200L, 5 BOXES (500 PCS.) : 312.00 EUR
