Product Name: Sodium permanganate
Use level: Industrial
Content: 40 (%)
CAS Number: 10101-50-5
Molecular formula:NaMnO4
Molecular Weight: 141.93
Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate.
Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on.
Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place.
Quality Standard: Â
Items index
Sodium permanganate (NaMnO4) Content / (%) 40
Water-insoluble content / (%) 0.01
Potassium (K) content / (%) 0.22
pH value 6 ?8
Density / (g/cm3) 1.36 1.39
Chloride (Cl) content / (%) 0.02
Specifications:
index value
appearance white crystalline powder or flakes
Assay 99.0%
residue on ignition 0.01%
Boiling point 135 c at 1,013 hpa
Moisture 0.25%
Uses:
It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine.
Package:
25kg carton drum or 1kg foil bag or by request of clients
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant.
General Information
Product Name Potassium Monopersulfate compound
CAS 70693-62-8
Chemical formula 2KHSO5 KHSO4 K2SO4
Molecular weight 614.7
Specification
Appearance White, free flowing granule
Available Oxygen, % 4.5
KHSO5, Â % 42.8
Loss on Drying  % 0.15
Bulk Density, g/L 0.80
pH (10g/L,25 C) 2.0 .4
Sieve Residue on 75 m test sieve, % 90.0
Packaging
Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements.
Storage
Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Formula:KAl(SO4)2 12H2O
Relative Molecular Weight:474.39
CAS NO,: 7784-24-9
EINECS No.:5637-689-7
HS CODE.: 2833301000
Appearance: lump, white crystal, white powder
Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating
Usage;
Food industry: Buffering agents and leavening agents in food-grade products.
Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc.
Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions
Use
Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry.
Quality Standard
Item Standard BP2000
Appearance purple noodle crystal
Purity 99.3% min
Chloride 0.01% max
Sulfate 0.05% max
Insoluble matter in water 0.15% max
Moisture 0.5% max
As 20 ppm max
Cd 50 ppm max
Cr 50 ppm max
Hg 10 ppm max
Pb 50 ppm max
Se 50 ppm max
Ni 50 ppm max
Sb 50 ppm max
Packing and Storage
Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
Chemical name:Magnesium nitrate
Molecular formula:Mg(NO3)2.6H2O
Molecular weight:256.40
Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas.
Quality standard:
Item Indicator
Industrial grade Agriculture grade
Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0%
PH value â?¥4 ---
Heavy metal â?¤0.002 ---
Water insoluble â?¤0.05% â?¤0.1%
Iron â?¤0.001% ---
Magnesium oxide content(CaO) --- â?¥15%
Nitrogen content(N) --- â?¥10.7%
Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture.
Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements.
1.Purity 98% white granule
2.Used for fertilizer or industrial material
3.Export Asia/Europe
4.ISO9001
Product Features
Appearance : White Or Light Yellow Crystal Powder
Odour: Sulfur Dioxide
Taste : Salty
Melting Poing : 150
Specific Density1.48
Ph : 4.0-4.6
Solubility : Soluble In Water ,insoluble In Alcohol
Application:
1. For industry
Mordant of printing and dyeing; Dechlorinate of textile after bleaching;
Sulphonated agent and reducer of chemical industry and pharmacy;
Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ;
The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment.
2.For food additive
Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc)
Specifications:
Na2S2O5 97% min
SO2 65% min
Fe 0.0015% max
water-Insoluble 0.01% max
As 0.0001% max
PH 4.0-4.6
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
