Silicon carbide application
1. Sic deoxidizer is a kind of powerful compound deoxidizer used in casting and steelmaking industry.
2. It has replaced the traditional si or c powder to remove oxygen.
Silicon carbide advantage
1. Sic deoxidizer is a cost-saving substitute for ferro silicon.
2. It can save the electric energy and shorten the work time.
3. We can produce sic deoxidizer in all kinds of the specifications and sizes according to the customer¡¡£¤s requirement.
Description
Solid calcium cored wire, while processing calcium, there won't be other oxide from powder packet cored wire so as not to pollute the molten steel. This product has high-density mandrel, the wire has the least specific surface area, and it can reduce the calcium oxide inclusions to the least. The calcium content per meter and more stable content of activity calcium make the calcium processing effect more stable.
Solid core calcium cored wire, while processing calcium, there will not be other oxide from powder packet cored wire so as not to pollute the molten steel. This product has high-density mandrel, the wire has the least specific surface area, it can reduce the calcium oxide inclusions to the least. The even calcium content per meter and more stable content of activity calcium makes the calcium processing effect more stable.
Casi cored wire description
Calcium silicon cored wire technology is a new treatment in secondary steelmaking developed in recent years, alloy core wire can purify the molten steel, change the inclusion form, improve the cast ability of the importantly, it will increase the yield of alloy , cut down the cost and consumption.
Vertically flipped packing or horizontal flipped packing
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
