Microsea (Guangzhou) New Energy Technology Co., Ltd.

Rated votage¡êo48v
Working wind speed: 1.8-25m/s
Survival max wind speed¡êo40m/s
Working temp.: -30¡«50¡æ

As buyer's request

rated output¡êo600w
épeak output¡êo1100w
¡érated voltage¡êo24v
¡éstart-up speed (m/s)¡êo0.20.4
;¡écut-in speed (m/s)¡êo1.3
;¡érated wind speed (m/s)¡êo10
¡éworking wind speed (m/s)¡êo1.25
8¡ésurvival max. Wind speed (m/s)¡êo40
9¡érotor diameter¡êo|¦ì1.7m
10¡énumber of blade¡êo3pcs
1blade material¡êoaviation duralumin
1éworking temp range¡êo-30æ50æ

As buye's request

Generator

1.Magnetic saturation generator design, 20years designed life.
2.2-2.5m/s start-up wind speed under low torque start-up technique.
3.Independent power supply
4.Blades are casted into molding at one time with balance up to 99%.
5.Bearings import from japan (nsk), long service time (5 years maintenance-free).
6.Low cost and low noise
7.Low cut in wind speed (3m/s) to guarantee the maximum generation at low wind speed.


One pc in one plywood

We have 4sets of used Detroit generators that were used as emergency power sources (Standby only) at a municipal water drainage plant in Korea. Please review the attached documents and assess
ENGINE SPECIFICATION
ENGINE MODEL Detroit Diesel 8163-7416 1232HP
ENGINE NO. 16VF013546
RPM 1,800
Cylinder 16
Injection method Direct injection
Cooling method Water Cooled
Fuel consumption rate 246â??/h
GENERATOR SPECIFICATION (AC Generator, 3Ã??, 60Hz, Brushless type
Generator Model DIG 4800
Emergency output 990 kVA / 792 kW
Continuous output 900kVA / 720kW
Voltage and Current 600 v x 86.6 A
Revolution 1800RPM
Excitation Voltage/Current 65V/10A
Power Factor 80%
Insulation Class F

We have a stock of quality, low-life generators from the military
ï?¬ CAT 3408 400kW
ï?¬ CAT C-16 500kW
ï?¬ CAT 3406 350kW (House type)
ï?¬ Cummins VTA-28G5 500kW
ï?¬ Cummins LTA-10 250kW (House Type)
ï?¬ Cummins LTA-10 250kW
ï?¬ Cummins NT85-G3 350kW
ï?¬ Cummins NT85-G3 350kW (House type)
ï?¬ Cummins NT85-G2 300kW
Please study if it is suitable for your market.

Small wind turbine generator.

Accumulators full charge time: about 8 hours
> Mast height/weight: 9m - optional /150kg
> Weight: 300kgs (without mast).

Model: ZH2KW
Rated Power: 2000 Watts
Maximum Power: ~ 2500 Watts
Type: 3 Blade Upwind
Rotor Diameter: 3.6 m (12 ft.)
Start-up Wind Speed: 2.5 m/s(5.6 mph)
Cut-in Wind Speed: 3m/s (6.7mph)
Rated Wind Speed: 10 m/s(22mph)
Cut-Out Wind Speed: None
Furling Wind Speed: 18 m/s (40mph)
Max. Design Wind Speed: 50 m/s (112mph)
Blade Pitch Control: None, Fixed Pitch
Over speed Protection: Auto Furl
Gearbox: None, Direct Drive
Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
Generator: Permanent Magnet Alternator
Output Form: 48 VDC Nominal .

Wooden case.

Wind turbine generator
we provide wind turbine generator with capacity rom 600kw- 2mw with German or international standard quality. The quotation is of competitiveness with satisfied quality.
S43/600KW Wind Generator Sets
Main parameters: installed elec. output 600KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s/operating temperature -30fpC-45fpC/total weight 65000kg
(Rotor :rotor diameter 43m/s wept area 1452m2/number of blades 3/rotational speed 26.8or17.9 rpm/power regulation, stall
(Blade:designation,LM19.1/FD43-600 made in China/aerodynamic profile FFA W3 NACA 634/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 1960kg
(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:56.6/Rated power 645KW/efficiency 0.97/rated torque 230KN.m
(Generator: rated output 600or 125KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1517or1013rpm
(Tower: height 38.5or48.5m/weight 33000 or45800kg
(Yaw system :type, active/yaw rate 0.2
S48/750KW Wind Generator Sets
Main parameters: installed elec. output 750KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s
(Rotor: rotor diameter 48.4m/swept area 1840m2/number of blades 3/rotational speed 22.3or14.9 rpm/power regulation, stall
(Blade:designation,LM23.2/aerodynamic profile, NACA 63xx-634xx/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 3050kg
f(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:68.2/efficiency fª0.97
(Generator: rated output 750or 185KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1520or1013rpm
(Tower: height 65m/weight 75000kg

different dimensions