Specification:
Power ratingMaximum working voltageMaximum overload voltageResistance range +-5%
Rt-1/4wsRt-1/4w250 v500 v0.5-22m
Characteristic:
Terminal strength No damage rmax +-0.3% or 0.5
SolderingGood thing no damage rmas+-0.5% or 0.5
Temperature cycling rmax+-0.5%
Vibration No damage rmax+-0.5% or 0.5
Moisture resistance rmax+-3%
Load life rmax+-2.5%
Temperature coefficient
Dielectric strength 2 xwork, volt no breakdown rmax+-0.5%
Insulation resistance Min 10
Short time overload rmax+-0.5%
Resistance to solvents No damage
Product brief introduction: xg-1000 series machines can be 26, 000 dots / hour speed will be different types of 52mm tape horizontal electronic components (resistors, capacitors, diodes, etc.) set by programming the sequence into the tape 42mm material for the horizontal component plug-in board pcb insertion machine. Windows2000 english-based application software systems, user interface easy to understand, realize man-machine interface dialogue, practical experience and scientific theory to bring you a combination of product quality and production efficiency .
Iec 61032 : 1998
Figure 12 -- test probe 18 ( small finger probe ª¦8.6 )
-- finger : metal material
-- handle : insulating material
The extension of the handle represents the arm of the child.
The handle is provided with an extension 451.6 mm long , and the probe should be applied with or without this extension, whichever is the more onerous condition.
Both joints shall permit movement in the same plane and the same direction through angle of 90íp.
This probe is intended to simulate access to hazardous parts by children of more than 36 months or less than 14 years.
Zx15 series resistor, open type, is applicable for the start, timing, braking and discharge in distribution system of 50hz, 660v ac, 440v dc. The capacitor is up to 4.6kw, fixed by aludirome with rounded spiral tubular type resistor element.
With shockproof and unbreakable advantages, it can take the place of z1 series resistor.
Features:
Altitude does not exceed 2, 500m
The ambient temperature between -25pc and +40pc, average temperature less than +35pc during 24 hours
Relative humidity below 85%, between -5pc and +20pc
Place free from serious pollution metal, insulation destroying, explosive, electric conductor dust and frequent violent vibration
China Pingshang Technology SMD resistor manufacturer, good quality, complete specifications, has a large stock warehouse, and sufficient supply. Large quantities can be shipped stably for a long time. Welcome to negotiate.
main effect
Shunt, current limit, partial pressure, bias
SMD resistor feature description
1. Ultra-miniature products;
2. Has a three-layer electrode structure;
3. High stability and high reliability;
4. Paper tape packaging is suitable for automatic placement machine installation.
Features & application :
Low resistance,small volume,large load capacitance and stability for characteristics.
Used Ceramic encapsulation,operating temperature range:-55í½+155íµ
Application for pover load circuit,pulse circuit of AC. and DC.
