We are professional manufacturer of carbide milling inserts.
1. Various grade and size is available.
2. High quality with competitive price.
3. Small orders are welcome.
4. We can produce milling inserts according to your drawings or samples.
We are professional manufacturer of all kinds of turning inserts.
1. Various size and grade are available.
2. Long use lifetime and stable performance.
3. Good quality with competitive price.
4. Small order accepted.
And we can manufacture products according to customers' drawings or specifications.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide.
Appearance: Grey, black solid, purple when its purity is more than 90%.
Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm
Package: Net in 100kg or 50kg new iron drums with nitrogen.
Specification: GB10665-2004
Specification Superfine Grade First Grade Second Grade
Gas yield(L/kg)L/kg 305 295-305 285-295
PH3 content in acetylene (PH3%) 0.06 0.08 0.08
H2S content in acetylene (H2S%) 0.1 0.1 0.1
INSERT, CUTTING TOOL: SIZE ID 8 MM, THICKNESS 10 MM, MATERIAL CARBIDE, FFT:FOR ROLL LATHE, TYPE: A8F3 K01 8BA524000; QUALITY K01; DIA 20 MM TAPER TO DIA 18.2 MM, MNFR: NADA MNFR PART NO: RBGA2010, DRAWING 1.1909/01 REV
INSERT, CUTTING TOOL: TYPE TURNING, SHAPE ROUND, SIZE DIA 9.53 MM, THICKNESS 3.18 MM, MATERIAL CUBIC BORON NITRIDE, RAKE 0 DEG, FFT: TOLERANCE S 0.13, TOLERANCE IC 0.05,
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
