5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.
Alloy grade
Silicon Si
Iron Fe
Copper Cu
Manganese Mn
Magnesium Mg
Chromium Cr
Zinc Zn
Titanium Ti
Zirconium Zr
other
Aluminum AL
new grade
old grade
0.40
0.40
0.10
0.5-0.8
5.8-6.8
0.20
0.02-0.10
each total
5A06
LF6
0.05
0.15
margi
5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.
1. Technology: Deep draw metal stamping
2. Material type: SUS 430
3. Material Thickness: 0.3mm
4. Press type: 125T
5. Cavities: 3 cavities
6. Specification:
11 steps stamping process with 1.1m length stamping mould;
All the side punch finished in the progressive die;
Deep drawn height to 22mm with diameter of 21.9mm;
INVITECH offers a one-stop shop from mold design, parts production to global delivery. In the production of precision metal and plastic parts, it has become a strategic partner of many well-known customers around the world due to its high reliability.
FAQ:
1. How long is the manufacturing lead time
Normally 30days. We use progressive deep drawn metal stamping which ensures maximum productivity and lowest cost.
2. How many press types in your workshop?
We have press type from 25t to 200t.
3. What type of parts you are specialized in?
We are specialized in production of precision metal and plastic parts,such as H4 G16T base, H7 PX26D base, BA20D base, etc.
4. Which kind of inspection equipments do you have?
Projector, 2.5D, Leakage test equipment, Vickers hardness tester, Outgassing test equipment, H4 and H7 visual inspection equipment, etc.
1. Technologyï¼?Progressive deep draw stamping
2. Material type: SUS 430
3. Material Thickness: 0.4mm
4. Press type: 125T
5. Cavities: 3 cavities
6. Specification:
4 steps deep draw process;
Material thickness change from 0.4mm to 0.2mm;
Deep drawn height to 25mm with diameter of 20mm;
1. Technologyï¼?Progressive deep draw stamping
2. Material type: SUS 430
3. Material Thickness: 0.4mm
4. Press type: 125T
5. Cavities: 3 cavities
6. Specification:
4 steps deep draw process;
Material thickness change from 0.4mm to 0.2mm;
Deep drawn height to 25mm with diameter of 20mm;
Commodity
Cold rolled Steel
Grade
Q195,Q215,Q235,08AL,SPCC,SPCD,SPCE,SPCEN,ST12,ST13,ST14,ST15,ST16,DC01,
DC03,DC04,DC05,DC06
Standard
ISO,JIS,ASTM,AS EN
Mechnical
Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality
Surface treatment
Chromated and oiled, and ant-ifinger
Hardness
Softy, half hard ,hard quality
Thickness
0.12-6.0mm
Width
600-1500mm
Coil weight
3-8MT/Coil or as your request