GSM frequency: 900/1800/850/1900MHz (standard)
Working frequency of detectors: 315M & 433M (standard)
Alarm mode: GSM SMS and voice dialing
Alarm response time: Less than 8s (Normal GSM signal)
The volume of siren: More than 110db
Power requirements: AC 110-240V 50Hz or 60Hz output DC12V
Working power consumption: less than 0.6W
Standby battery: DC 8.4V/800MAH (lithium battery)
Standby battery working time: more than 15 hours
Operating temperature: -10 ~ 55
Humidity: Less than 95% non-condensing
Dimension:180(L)*130(W)*32(H)mm.
One main unit
One wireless door/window magnetic contact
One wireless PIR sensor
Two remote controllers
One White siren
One AC adapter
One digital keypad
One English user manual
Main Features:
1. Bulit-in GSM 850/900/1800/1900MHz.
2. The alarm host with 2 relay outputs,one of the relays with linkage function.
3. Support remotely arm/disarm by phone key press/SMS.
4. With independent arm function.
5. Alarm by SMS & Voice,can start-up on-site monitoring.
5. Can configure two-way communication function.
6. Can define alarm guarding zones.
7. With weak GSM dignal reminder and GSM network failure remind function.
8. Wtih external power failure alarm function.
9. With backup lithium battery(built-in 800 mAh).
10. With 10 wireless aalrm zones,2 wired alarm zones,1 wireless fire alarm zone & 1 wireless SOS alarm zone.
Technical Parameter:
GSM frequency: 900/1800MHz (standard), 850/1900MHz (optional)
Working frequency of detectors:3 15M & 433M (optional)
Alarm mode: GSM SMS and voice dialing
Alarm response time: Less than 8s (GSM in normality)
The volume of siren: More than 110db
Power requirements: AC 110-220V 50Hz or 60Hz
Working power consumption: less than 0.6W
Standby battery: DC 8.4V, 800MAH (Lithium battery)
Standby battery working time: more than 15 hours
Operating temperature: -10 ~ 55
Humidity: 20% to 95% (non-condensing)
Dimension: 220(L)*147(W)*38(H)mm.
1. Bulit-in GSM 850/900/1800/1900MHz.
2. With color LCD display & keyboard.
3. Support site monitoring & two-way communication functions.
4. Support multi-ways arm/disarm.
5. Can define the alarm zones.
6. External AC power failure alarm.
7. Host with tamper alarm function.
8. Bulit-in backup lithium battery(800 MaH).
9. With 1 wireless SOS zone, 1 fire alarm zone, 24 wireless alarm zones, one external power failure alarm, 2 wired alarm zones.
GSM frequency: 900/1800MHz (standard), 850/1900MHz (optional)
Working frequency of detectors: 315M & 433M (optional)
Alarm mode: GSM SMS and voice dialing
Alarm response time: Less than 8s (GSM in normality)
The volume of siren: More than 110db
Power requirements: AC 110-220V 50Hz or 60Hz
Working power consumption: less than 3W
Standby battery: DC 8.4V, 800MAH (Lithium battery)
Standby battery working time: more than 15 hours
Operating temperature: -10 ~ 55
Humidity: 20% to 95% (non-condensing)
Dimension: 160(L)*113(W)*38(H)mm.
1. Support GSM 850/900/1800/1900MHZ.
2. With infrared night vision camera.
3. Automatically send alarm SMS,MMS,E-mails and support two-way communication while alarming.
4. Automatically send on-site pictures when alarming or remotely request to take pictures at any time.
5. Remotely control alarm host by SMS or phone button.
6. Support burglar alarm,fire alarm,and SOS alarm.
7. With external AC power failure alarm function.
8. Build-in backup lithium battery.(800MAH)
Packaging Includes:
One alarm host (main unit)
One remote controller
2G SD Card
One Power adapter
One English Manual.
The main specification of mainframe
Power adapter: input 100V240V/50/60Hz output DC12V
GSM Working frequency: 850/1900/900/1800MHz
Wireless receiving frequency: 315MHz/433 MHz
Communication mode: GSM/GPRS
Wireless detectors allowed quantity: unlimited
Wired guarding zone: Two
Image resolution: 640*480,320*240
Image format: JPEG
Memory card: 2GB
Camera resolution: 30 million pixels
Built-in lithium battery: 800mAh
Battery standby time: 12hours
Operating temperature: -10 to +45
Storage Temperature: -20+60
Humidity: 10-90% No-condensing
Dimensions: 150L*71W*70H (mm).
1. Built-in GSM industrial module, easy installation and configuration
2. 3 wired zones and 6 wireless zones, each zone can be set as the Bypassing, Burglary or Emergency zone
3. Remotely program the function of the control panel by SMS or phone
4. Can Arm,Disarm by SMS or phone
5. Edit the name of zone by SMS,when alarm,SMS report the alarm information.
6. Real-time, Delay, 24 hours, Bypass defense zones program
7. Short message reporting of AC power failure and power and phone lines fault
8. With the operation password,make sure the safty.
9. 8 seconds pre-recorded alarm message that will be played when alarming
10. 4 pre-set telephone numbers to dial and 4 pre-set telephone numbers to send SMS
11. Automatic switch of AC power and backup batteries.
Intelligent home security and safety system GSM Wireless Security Burglar/Intruder Alarm System
Description:
Our GSM burglarproof alarm system which have GSM network protection, short message sending function. DIY, Customize, easy-to-use and install! It is the updated advanced GSM prepaid module made by Shenzhen AnBoShi Electronic Technology CO., LTD. It features eleven different wireless protection zones, two wired protection zones, partial disarmed, remote telephone control, remote electricity control, etc. Compatible with CCTV surveillance and centre monitoring system.
1. Wireless type, easy to install, without phone line.
2. Remote control, convenient.
3. Password protected
4. SMS to enable arm/disarm, partial arm/disarm, siren
5. High siren volume so to scare away intruders
6. SMS and auto dial up three phone numbers, locale monitoring start on.
7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status.
8. Audible/mute siren programmed
9. Panic help
10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up
11. Enable to setup alarm receiving central through GSM network.
Specification:
1. Protection zone:
Wire: 2
Wireless: 8
2. GSM band: EGSM900/DCS 1800/PCS 1900MHZ
TX RX
EGSM 880~915MHz 925~960MHz
DCS 1710~1785MHz 1805~1880MHz
PCS 1850~1910MHz 1930~1990MHz
It can save six alarm telephone number and separately set SMS function or telephone alarm. Transmitting power consumption: 1W
3. LED indicators: 8
4. Low power protected time: <1 s
5. Data responds time: <10s (standard network)
6. Working power voltage: AC 110~220V 50-60Hz (optional)
Panel power consumption: <3W
Battery back-up: DC 9v Standby last >4 hours
Standard package: One GSM module, one remote keyboard, two remote controllers, one PIR, one door magnetic sensor, one siren output, one adaptor, speaker(optional), remote electric control(optional)
Standard package: One GSM module, one remote keyboard, two remote controllers, one PIR, one door magnetic sensor, one siren output, one adaptor, speaker(optional), remote electric control(optional)
The image alarm, mobile phone and computer receiving
Function of product
1. Infrared sensor, the image monitoring and moving objects detection
2. MMS function, when the alarm system alert, it will send the pciture of the local to your cell phone and your e mail.
3. Remote control, gain voice and image information
4. Hiding alarm, guard accident
5. With IR night vision camera, it provides 24-hours monitoring that the image is clear enough
6. Built-in battery, still work during power failure
7. Disposes the extension, monitor area is expanded
Suitable place:
1. Family
2. Factory, warehouse
3. Office, financial room, code office
4. Bank, middle and small scale market
5. Supermarket, retail sales...
Description:
Gsm network protection, short message sending function. Diy, customize, easy-to-use
And install! ats- is the updated advanced gsm prepaid module made by shenzhen
Autosecu technology co., ltd.It features eleven different wireless protection zones,
Two wired protection zones, partial disarmed, remote telephone control, remote
Electricity control, etc. Compatible with cctv surveillance and centre monitoring system.
Features:
Wireless type, easy to install, without phone line.
Remote control, convenient.
Password protected
Sms to enable arm/disarm, partial arm/disarm, siren
High siren volume so to scare away intruders
Sms and auto dial up three phone numbers, locale monitoring start on.
Sms to recheck the gsm panel status, alarm report, zone name, arm/disarm status.
Audible/mute siren programmed
Panic help
Ac power shutoff self-detected to avoid malice destroyed, automatically switch to
Battery back-up
Enable to setup alarm receiving central through gsm network.
Specification:
Protection zone: wire : wireless:
Gsm band: egsm /dcs /pcs mhz
Tx rx
Egsm ~ mhz ~ mhz
Dcs ~ mhz ~ mhz
Pcs ~ mhz ~ mhz
It can save six alarm telephone number and separately set sms function or telephone
Alarm. Transmitting power consumption: w
Led indicators:
Low power protected time:< s
Data responds time: < s (standard network)
Working power voltage: ac ~ v - hz (optional)
Panel power consumption: < w
Battery back-up: dc v standby last > hours
Working condition: temperature- f++ f¦
Humidity: - f++ f¦
Net weight:kg.
Gross weight:kg.
Panel size: mm·+l·¼f- mm·+w·¼f- mm·+h·¼
Standard package : one gsm module, one remote keyboard, two remote controllers,
One pir, one door magnetic sensor., one siren output, one adaptor, speacker(ooptional), remoteelectric control(optional)
