Specifications :
2 Panels Of 4 Square Meter 200–240 L 5.4 L 225 Litres
Need Price Jasai New Mumbai
Technical Specification
Absorber Sheet Copper 32 Swg/0.19 Mm Thick Selectively Coated Laser Welded Nickel-chrome Coated (e.t.p. Quality)
Riser Tube Copper 12.5mm 24 Swg (+ 0.5 Mm)
Header Tube Copper 25 Mm 22 Seg (+ 0.5 Mm)
No. of Riser Tube 9 Fins
Bonding Between Riser & Absorber high Temperature Ultrasonic Seam/laser Welding
Absorber Coating selective Coating Absorbity 0.95+ 0.02 Emmissivity = 0.10 +0.02
Front Glazing Toughen Glass 4 Mm Thickness Transparency 95% And Above
Back Insulation 50mm Thick Rock Wool Slab Density Of 48 Kg/m3 With Aluminum Foil
Gasket Epdm Rubber Grommets And Glass Beeding
Collector Box Jindal/jcw Ms Sheet, Extruded Channel Backed By A Sheet Of 22 Swg
Header Inlet & Outlet Jacket Brass Flanges 62 Mm Dia
Collector Stands And Legs m.s. “l” Angle With Enamel Coated
Support Top Glazing Glass Retaining Aluminum Beeding 1.6 Mm
Collector Box Welding tig Welding
Insulation Rock Wool/puf
Fosterers S.s.screws And Bolt Nuts
Collector Sealant silicon Base
Hot Water Storage Tank Stainless Steel 304 Grade (food Grade) Plasma Tig
Welded Tank /cr With Coating /copper Tank
Insulation 150mm Rock Wool (compressed 100mm) 48 Kg/m3 Density (or)puf Insulation
Outer Cladding Powder Coated Optional Ss 302 Stainless Steel
Screws And Fasteners Stainless Steel
Pipes And Fittings For Internal Ss Fittings “b” Class, Is Standard
Pipes And Fittings For External Ss Fittings “b” Class, Is Standard
Temperature Gauge Nil
Electrical Backup as Per The Electrical Power Sanctioned, Each 200 Lpd 2kwh Given. (optional)
Supporting Structural Stand Ms Channels/angles Of Suitable Size With Enamel Coated
Payment Terms:
full irrevocable confirmed l/c at sight
Destination:
Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Name: Ductile Iron Pipe
Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH
DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings
pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : full irrevocable confirmed l/c at sight
Please provide a quotation to the following requirement from importer -
Product : Push to Connect Fitting Components for Water
Specifications:
• Socket Material: Carbon Steel
• Socket Part Number: YW-HA-001
• Socket ID: 45
• Plug Material: Carbon Steel
• Plug Part Number: YW-HA-002
• Bite Ring Material: SUS 304
• Bite Ring Number of Teeth: 24
• Bite Ring Part Number: YW-HA-003
• O-Ring Material: EPDM
• O-Ring Part Number: YW-HA-004
Service Requirements:
• Ensure all parts follow standard fine tolerances.
• Ensure there are no sharp edges on any component.
• We are looking forward to receiving your quotations.
Required Qty. 5000 sets per month
All Carbon steel items to be galvanised.
Quantity Required : 5000 Set/Sets
Shipping Terms : CIf
Destination Port : South Korea (Republic Of Korea)
Looking for suppliers from:
South Korea (Republic Of Korea)
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product: Graphite Gasket Sheet
Specifications:
Product: EPDM Gasket Sheet, 5mm
Origin: South Korea
Specifications: Size: 2000x2000x5mm,
Make: Korea Pillar
Spiral Wound Gasket. 2600-EOO
Origin: South Korea
Specifications: Size: 760 x 27 7 x 4.5mm. Filler: Graphite Hoop: SUS 304, Make: Korea Pillar - 30 pcs
2. Graphite Gasket Sheet, 6633
Origin: South Korea
Specifications: Graphite Gasket Sheet with Metallic SUS 316 Foil, Pillar Style No.: 6633, Size: 1500x1500x2mm, Make: Korea Pillar- 05 pcs
3. Non-Asbestos Gasket Sheet, 56 KV 3mm
Origin: South Korea
Specifications: Size: 2000 x 2000mm Thickness: 3mm LP Heaters and Spool Piece of Condenser Outlet Piping Make: Korea Pillar
4. Non-Asbestos Gasket Sheet, 56 KV, 4mm
Origin: South Korea
Specifications: Size: 2000 x 2000mm Thickness: 4mm LP Heaters and Spool Piece of Condenser Outlet Piping, Make: Korea Pillar
Terms & Conditions: Document required with Quotation:
i. Technical literature
ii. Drawing of required spares/equipment
iii. Certificate of conformance
iv. OEM certificate is compulsory with quotation otherwise all supply will be rejected.
Document required along with delivery of items:
i. Product quality certificate
ii. Factory test report
iii. Product material certificate
iv. Part Number clearly _mentioned on each spares
Quantity - as mentioned above
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : TT
Looking for suppliers from : South Korea (Republic Of Korea)
