1. Power Supply: AC220V¡À10V ,50Hz / AC110V¡À10V,60Hz
2. Temperature: -15 to 60 degrees
3. Humidity: <95%, without concretion
4. Passage Width: <=600mm
5. Passing Speed: 40 persons/min (IC Card)
6. Power Consumption: 100W
7. Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
8. Communication Interface: RS485 (Distance:<=1200m)
9. Material: Housing - 304 stainless steel arm - stainless steel
10. Dimension: 420*330*980 mm Arm Dimension:38*500mm
11.Working Environment: Indoors or outdoors with shed.
Functions and features:
1. Unique incomplete wheel transmission is adopted to make turnstiles held or unheld in zero position more accurate and reliable.
2. Running stable, little noise and no mechanical impact
3. Self-checking-power-on function, if power on,turnstile will auto get to be held.
4. Various working means can be set in the control panel menu, namely: bi-direction card reading passing, or one direction card reading passing and another passing limits, or one direction card reading passing and another free passing, etc.
5. If power off, arm will fall automatically while power on later, arm should be lift by hand. First press the arm with a little force and then lift it manually.
6. It is with RS485 connection for far control arm up and down to satisfy the special needs or fire control requirements.
7.It is with standard electrical interface to connect various kinds of readers and writers for easy integration and also computer far control and management can be realized by computer.
8. It will count the persons who have been passed through automatically and will show the number by LED directly.(LED is optional)
9. Passing direction will be shown by LED and passengers will know which direction is allowed to pass.
10. Card reading memory or card reading without memory function can be set in the control panel menu according to your request.
11. If working with software, the total-in-population can be set to satisfy special request.
12. Re-position function. After card reading, if passenger not through within the specific time, time and the limit passing time length can be set.
13. Card Mouting is avaliable.
14. Uncompleted wheel turning system is adopted for locking the turnstile in zero, and unlocking will be more reliable and accurate.
15. Optional:
1) Counter and counter display
2) Access controller or card reader.
3) Key by-pass.
1. Revolving Door Dimensions: 2200L x 1400W x 2300H mm
2. Door Material: 304 stainless steel
3. Drive Way: Electronical without mechanical card agency.
4. Turning Direction of the Gate Bar: A: bi-directional B: single-directional
5. Controller: using 16-bit microprocessor as a core device, able to programmed according to clients' needs.
6. Interface: Standard input, output interface, able to used for other system intefration.
7. Sigal: 1) Dry connect spot; 2) TTL signal; 3) 232 communication interface; 4) TCP / IP communication interface (selective)
8. Working Voltage: AC220í+10%
9. Power Supply: AC220í+10%; DC24V3Aí+10%; DC12V3Aí+10%
10. Working Enviornment: indoor / outdoor
11. Temperature: 0íµ~65íµ( special temperature need to be booked.)
12. Humidity: 5%~90%
13. On / Off Time: 1 second
14. Passing Speed: 25people /minute
15. Light Prompt: green light passing, red light no passing
16. Failure Status: Passing freely after power interrupt
17. Service Life: more than 300 million
18. Shell Protection: waterproof seal
19. Card Reader Installation: 2
20. Installation and Maintenance Position: 1
21. Protective Devices: external infrared protection grating
Features:
The arm will drop automatically while the power cut off.
Direction of through is adjustable, one-way, bi-direction.
RFID access controller for standard, fingerprint reader, facial identify reader, bar code reader, consume system optionally.
Optional audio prompt while gate open, support voice record inside by customer
Option IR detector, support people counting, prevent follower, wrong way alarm function
Option temperature controller, support machine working fine in cold weather.
Option Bluetooth remote controller, support remote open.
Roste rst series turnstile is designed to control pedestrians entering and exiting restricted area , usually under surveillance in low security area. 3x120 degrees design of bar rotation make it more cost effective , bi-direction control is more suitable for high volume pedestrian traffic , up to 30 peoples is possible. It is widely used in application like railway station , museums , park , factories , airports , sport stadiums and so on.
Features:
1. The whole machine is made of stainless steel according to the international design of anti-dust, moistureproof water proof, surface treatment wire drawing (default), polishing, electroplate, baking finish.
2. Drop-arm function , in case of power failure , the arm will drop automatically to ensure unblocked access , rise the arm by hand when power is on.
3. Incorporating advanced hydraulic kinetic buffering technology to ensure fast and smooth operation.
4. Equipped with led directional indication / status lights
5. The emergency button which can ensure unblocked access is available.
6. When the turnstile arms have rotated for more than 60 degrees, the mechanical override will be activated automatically to prevent tailgating. Automatically to prevent tailgating.
7.The positive action lock also helps in preventing two passage at one time
8.Anti-illegal entry with forced rotation feature which can withstand force to 80kg
9.Unique tripod design ensures safe and reliable operation. Highly durable design ensures life span more than 5 million cycles.
10.Equipped with standard input/output signal interface, can be integrated with all types of access control panel, offering complete entrance control solutions..
We introduce a new product line that is combination of high level electronic as well as mechanical security through its range of Gate Security Systems that physically prevents Unauthorized Entrants from entering the premises. The advantages of using these products compared to conventional systems include the better utilization of manpower, increased reliability and improved security.
The integration of an Access Control System from those marketed by Metro Exporters can provide physical Access Control. An optional Integration of a Time and Attendance Recorder from the available range can serve the Dual purpose of Access Control as well as an employee Attendance System.
Features
• Our series of turnstiles is designed and tested to withstand rugged environmental and operating conditions under shelter.
• Body made from Stainless steel providing a good aesthetic value while serving to be reliable.
• The Fully Automatic Turnstile arm moves automatically when valid RFID Card / Fingerprint is authenticated
• During an emergency or power failure the Arm of the tripod turnstile drops down making it an easy and free way to pass.
• When power is restored, the Arm automatically raises up back to its normal position
• Can be made to operate in Uni-directional or Bi-directional mode as per requirement.
• Visual indication of Acceptance (GREEN Arrow) /Rejection (RED Cross).
• Our Access Control Hardware can be integrated within the turnstile to preserve aesthetic value and increase security.
Optional Features
• Optional integration of Various Readers: like Fingerprint Readers, Smart card Readers and many such marketed by Metro Exporters can be integrated within the Turnstile as per customer requirements.
• When the Fire Signal is activated the Arm of the Tripod Turnstile drops automatically making it a free way to pass. Once the Fire Alarm is deactivated then the Arm returns back to the normal position.
• Optional Remote Control Available for operating Entry/ Exit of Turnstile.
Technical Specifications
Power Supply: AC220V ±10V, 50Hz
Operating environment temperature: 0℃ - 50℃
Passing Speed: ≤ 25 entrants/ min
Weight: 43 kg approx.
Dimensions: 1235mm (L) x 780mm (W) x 1000mm (H)
Length of Rod :500mm (included in above dimension)
Turnstile, tripod turnstile, waist high turnstile, optical fast lane turnstile
Product feature
1 Size: 1200mm(l)*280mm(w)*960mm(h)
2 Arm length: 500mm 3 power:ac220v input, driven by dc24v 500ma safe current
4 Working temperature: -20-60
5 Working humidity: <90%
6 Input interface: 12v ttl signal, or 12v pulse signal, width> 100 ms, driven current>10 ma
7 Passing speed: 30-40 person/minute
8 Communication: tcp/ip, rs485/232 optional, distance in rs485< 1200m
9 Led high light of direction indication
10 Reader interface: wiegrand 26/34/66, rs 485/232, support many mode, magnetic, em id, mifare one ic, ti, barcode, rf id and etc.
11 Noise:<50 db
12 Working times without failure:4 million
13 Weight: < 70kg
Product specification/models
Special drive system, make turnstile lock very stable and exactly
System runs with little noise, no mechanical strike
Can set passing mode by software: one way passing after authorization, both way passing after authorization, both way passing without authorization.
Lock and alarm when forcing to lock, when illegal interloper push arm in 5degree the arm will be locked, meantime sound alarm, it will be released when getting valid open signal.
Supply many standard interface like rj45 /rs485/232 to connect to em id, mifare 1 ic, ti, magnetic, barcode, fingerprint, hand, face readers, strong compatibility, easy to system integration.
Reading card with memory or without memory optional.
Using tcp/ip protocol, realtime data uploading or manually data upload, easy to data analysis, no data losing when big data or data cash
Arm drop when suddenly power off, and supply cascading interface input interface like fire alarm, when sending signal in fire alarm, the arm drop, in case to some emergency situation.
Self examine and alarm hint, easy for user to use and maintain.
High light led of direction indication, red to show prohibiting passing and green to show allowing passing.
Waterproof and ventilative structure.
1. Driving Mode for Gate Bar:
2. Turning Direction of Gate: single-directional; bi-directional
3. Mechanism Driving Mode: direct-current motor
4. Driving Mode of Gate Bar: automatic rotation; manual rotation; rotating 10degree manully then turn automatically
5. External Devices: able to external connection of IC, ID, barcode and other reading and writing devices
6. Protection: able to turn if the external force is over the setting point, the tripod will be moved, then resetting automatically
7. Anti-reversal Function
8. Temperature: 0degree celsius~60degree celsius
9. Humidity: 5%~95%
10. Speed: >15people /minute
11. Noise: less than 50dB
12. Channel Width: 550~570mm
13. Working Environment: indoor,outdoor(need rain-proof frame)
14. Overhaul Manholes: two
15. Service Life: 3million continuous switching
16. Power Consumption: 60W.
1. Designed reasonable and reliable movement, noise, smooth running, and long service life.
2. Access Prompt function:Red and green light prompt the passing information.
3. The programmable gates control state, with a variety of operating modes you can choose, you can set a one-way or two-way control
4. Installation with personalized interface, compatible with IC, ID cards and other smart cards.
5. Standard input and output interface
6. Scour protection function ,when the gate signal is not received, the stick is automatically locked
7. Bi-direction, or one direction permitted, one forbidden, or one direction charged, one for free, and all the working molds set by the buttons in the main control board
8. Self-test failure alarm function,user-friendly maintenance and use.
9. With the power drop -shot function.In case of power off,the railing falls,and in case of power on ,the railing automatically rise.
10. Counting function:record the passing times,LED digital display function(optional)
11. Waterproof, Sunscreen, Cold and high temperature.
Aneiz T10 Tripod turnstile-Support OEM and ODM. Support third-party biometric devices, such as fingerprint scanner, face recognition camera. RFID card reader, QR code scanner.
Aneiz T10 Tripod turnstile is a high performance pedestrian control turnstile. Usually used in high pedestrian traffic flow in both directions to control pedestrian entry or exit in restricted areas
304 Stainless steel material, durable, high quality, for long lasting use.
The T10 features designed with standard relay signal, which can integrate easily to any kind of access control and fire systems through I/O (dry contact).
In case of emergency, when power goes off both directions are free.
Passing Direction: Single directional / Bi-directional.
FEATURES
Aneiz T10 Tripod turnstile -Compatible with any access control systems.
Aneiz T10 Tripod turnstile -304 Stainless steel material, durable, high quality, for long lasting use.
Aneiz T10 Tripod turnstile - Reset automatically: the gate arm will lock if not passing at preset time (5 seconds), the time can be adjusted by software.
Aneiz T10 Tripod turnstile - Rapid throughput, 35 to 40 people per minute.
Aneiz T10 Tripod turnstile - Passing direction: single directional / bi-directional, both the two directions can be switched or set as free mode.
LED indicator on the top displays the status of passing.
Aneiz T10 Tripod turnstile -Multiple Operating Modes-optional
IC/ID card, key fob, QR/bar code, face / fingerprint / finger vein biometric recognition, push button, ESD, wireless remote control, insert coins / card / wristband, digit counter...
Material 304 Grade Stainless Steel
Dimension 330(L) X 420(W) X 990(H)mm
Arm Length 500mm
Passage Width 550mm standard lane
Throughput 35 to 40 people per minute
Response Time â?¤0.3S
Net Weight 35Kg/pcs
Directional Mode Uni-directional or bio-directional
Emergency Function Arm release automatically for
Emergency access
Power Supply AC220V/110V, 50/60Hz
Power Voltage 24V DC
Power Consumption 20W
MCBF 5 Million
Operating Temperature -20 �°C - 75 �°C
Operating Environment Indoor or outdoor use
Relative Humidity 90%
LED Indicators Red cross means gate open,
Green arrow means gate closed
Warranty: 18 Months
The ESD anti-static gate is mainly to test whether the anti-static shoes and wrist straps of employees are qualified, but in order to ensure that everyone must do an anti-static test before entering the dust-free car and can enter the workshop after passing the test, so it will be in front of the workshop. Install ESD anti-static access control gate, which not only detects the static resistance value, but also saves the resistance value record of each employees.
Product Description
1.Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on, complying with fire safety
Requirements
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional)
14. Support infrared photocell for anti-pinch and reset function (optional)
Product Description
1.Fault detection an alarm functions, easy to use an maintenance
2. The running status can be programme an controlle with the built-in keyboar on the main board
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribe time an reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locke automatically until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Shoul the user fail to pass within the prescribe time (default time is 5 seconds),the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be use with variety of car readers: IC / I car readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LE direction indicator
11. Gate auto opens when power off an auto close when power on, complying with fire safety
Requirements
12. Alarm function, in case of illegal intrusion an reverse intrusion, etc.
13. Counter function (optional)
14. Support infrare photocell for anti-pinch an reset function (optional)
We have professional technicians and equipment service in turnstile assembling, and a few batches of turnstiles have been made and used successfully.
We provide customized oem processing service such as turnstile assembling, laser welding processing.
Easy access to the electronic control module
Automatic drop of barrier rod during power failure.
Various operational methods available
Build-in led light indicator
Card readers can be installed
Can be connected to any access control system
Low maintenance requirements
Positioning feature ensures the rods are always in right position
Hydraulic damping system ensures quiet operation
Technical dataunitel128
Passage widthmm44
Working temperaturedegree-25 to +70
Dimension excluding barsmm480x280x960
Net weight including barskg33
We areâ turbooâ automation for turnstiles since 2006
We own 3 factories and 1 office and rd center in china
Hoping i can get the chance to serve you
Any comments, please don't hesitate to contact me
Thanks in advance!
Technical datal121
Dimension480x280x980mm
Unlock time0.2s
Passage width 550mm
Throughput rate35p/m
Power suppl100~240v
Operational voltage24v
Max power consumption30w
Frequenc50~60hz
Prectection level44ip
Working temperature-25~70c
Electro-magnetic drivedc
Net weight36kg
Input12v dr contact
