Find Verified Metallurgical Coke Suppliers, Manufacturers and Wholesalers

For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86%
Sulphur: 0.7%~1.0% Ash:13.5%~18%
Volatile matter: 1.5% max. Moisture: 8%~15%
Size is customized

Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel.
Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze).
Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal.
We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under:
Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality.
Complete combustion of coking coals resulting in almost negligible levels of pollution.
Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications.
We are planning to develop new trends as far as improved coke quality is concerned.
Completely RCC coal & coke yard which ensures that the coke quality is maintained.
Exclusive mechanized machines for exact sizing and screening of coke.
Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke.
We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys.
We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven.
Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required.
The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.

We are mandate, of a large mining consortium
As we are direct representatives, it facilitates commercial dialogues and allows us to offer the following products.
- Thermal coal type A and type B. (MOQ 30,000 Mt)
- Anthracite coal or black coal. (MOQ 15,000 Mt)
- Metallurgical coal or coking coal. (MOQ 20,000Mt)
Buyers interested in these products send a message or request.
You can leave your contact information and I will respond by WhatsApp or email.

Other names: Coaking coal, Nut coke, Coking Coal, Metallurgical coke particle,
HS Code: 2704001900
Particle size: >25mm
Appearance: Grey to black lumps
Place of origin: Russia
Packaging: In bulk

Metallurgical coke is the macroporous solid carbon material which is produced by carbonization of coking coals of specific rank or of suitable coal blends at the typical temperature range of 9001100 °C in the absence of air or in the presence of only limited supply, i.e., during the destructive distillation of coal.

Item: metallurgical coke
Ash: 12.5% max
Moisture: 5% max
VM:1.5% max
S: 0.6% max
P: 0.035% max
F.C: 86% min
Size(90%min):10-30mm/30-90mm.



1MT in jumbo bag

We are suppliers of Met Coke of Chinese origin. Please contact us if you have requirements for this product. Thank you

Specification of metallurgical coke:
FC: 85% min
Ash: 13% max
Sulfur: 0.8% max
Moisture: 14% max
VM: 1.5% max
Size: 5-15mm, 10-30mm, 20-40mm, 30-80mm

Metallurgical Coke

Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of bituminous coal. In its natural form, bituminous coal is soft; its medium-grade composite contains a high occurrence of unstable components. The majority of the unstable components are either reclaimed or recycled. The coke handled by our couporation is made from superior coking coal of Shanxi province. Provided with the dvantages of low ash, low sulphur and high carbon.Our coke is well sold in European,American,Japanese and South-east Asian markets. Our owned Coke plant are located in Shanxi Province and supplying of you many kinds of coke

DAILY: More Capacity to be Eliminated in Taiyuan
On October 29, price of I grade metallurgical coke (CSR65) in Taiyuan, Shanxi delivered to Tangshan was 2250 yuan/t, some at 1880 yuan/t (ex-works, picked up by buyers).
At present, supply falls short of demand.
To date, 3.74mn t of coking capacity was eliminated in Taiyuan. 4.5mn t was expected to be phased out by the end of this month.
750,000 t of newly-added capacity was put into production and another 750,000 t will be added in these two days. November and October will see more newly-added capacity.
Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.

Metallurgical coke
Model No. MC-01
Fixed carbon(Min) 85%
Ash(Max) 13.50%
Volaltie matter(Max) 1.5%
Sulfur(Max) 0.8%
Moisture(Max) 8%
Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm

Total Moisture as receive basis, DSTU ISO 579 2002 4,2
Ash dry basis GOST 11022 95, ISO 1171 97 12,1
Total Sulfur dry basis GOST 2059 95, ISO 351 84 0,58
Volatile Matter dry ash free basi GOST 6382 91,ISO 562 81 0,2
Net Calorific Value as receive basis, kcalkg DSTU ISO 1928 2006 6670
Gross Calorific Value dry ash free basis, kcal kg 7983
Phosphorus, P', DSTU 253794 GOST 1932 93 ISO 622 81 0,042
Mechanical strength MA DSTU 2206 93 GOST 5953 93
ISO 556 1980 65,5
Mechanical strength M10, 7,7
Reactivity of coke, CRI, DSTU 4703 2006 27,4
Coke strength after reaction, CSR, 59,8

Both blast furnace coke and foundry coke are made by baking a blend of selected coking coals in certain high temperature without contact with air until almost all of the volatile matter is driven off. The resulting product, coke, consists principally of carbon, as listed in above table. By-products are crude coal tar, light oils, and ammonia, etc.

Generally speaking, chemistry, size, and strength have been considered the most important properties for use in the blast furnace. Other important factors are coke reactivity and csr (coke strength after reactivity), which deal with the amount and size of pores and walls, porosity, and density. Carbon textures and microstructure are two main factors that affect the reactivity, stability, and the coke strength after reaction.


In ton bag or as your request

Metallurgical coke is a general term for blast furnace coke, foundry coke, ferroalloy coke and non-ferrous metal smelting coke. Metallurgical cock and foundry coke are made from a mixing of several kinds of coal, under a high temperature (1300C) process.

Place of Origin:Shaanxi, China
Type:Metallurgical Coke
Calory (J):7500
Sulphur Content (%):1
Ash Content (%):14
Fixed Carbon (%):86
Moisture (%):8
Phosphorus Content (%):0.03
Volatile Matter (%):1.5
Abrasive Resistance:7
Crushing Strength:90
Brand Name: Speed
Model Number: Speed Metallurgical Coke

Packing Method
1. In Jumbo Bag, 18MT/20'Container
2.Bulk in Container, about 20 tons/20'Container
3. In Jumbo bag, Bulk vessel transport/Bulk in train transport
4. As customers' request

Low Ash Metallurgical Coke

Supplier from Cairo, Egypt
10000 MT Met Coke 30/90mm Specification :- Moisture 5% max Ash 10.5% max V.M 1.0% max Sulphur 0.70% max Phosphorus 0.040% max CSR 65 min CRI 25 max M40 85 min M10 7 max Fixed carbon 88 min Calorific value 7200

Buyer from Cairo , Egypt
Met Coke 30/90mm 10000 MT ready for export now , delivery on Ex-works basis
Specification :-
Moisture 5% max
Ash 10.5% max
V.M 1.0% max
Sulphur 0.70% max
Phosphorus 0.040% max
CSR 65 min
CRI 25 max
M40 85 min
M10 7 max
Fixed carbon 88 min
Calorific value 7200

Metallurgical Coke and Foundry Coke are made from a mixing material of serval kinds of coal,under a high temperature(1300) process.They are widely used for steelmaking,ferroalloys manufacture or non-ferrous metals smelting,iron castings manufacture or other related metallurgical and foundry industry,because of its special physical and chemical characteristics:high strength and fixed carbon content,low sulfur and low volatile matter content.

Metallurgical Coking Coal - For Sale USA
HIGHEST QUALITY COAL FOR SALE
Offer: 60,000 Short tons (Metric Tons 54,432)
Description: Low Volatile Metallurgical Coking Coal
Washed product: Indian Steel Grade 1
Uses: Making coking coal for melting Steel â?? Pulverization into blast furnaces
Important Specs: Total Moisture 8.5 â?? Volatile Matter 17 â?? Ash 7.75 â?? Fixed Carbon 75.25
Carbon 82.4 Max Fluidity (Degrees)C: 475 â?? Excellent Petrographics (See Website for full specs)
Sampling: Two auto samples at mine loading and two at port unloading
Owners Bio: See Bio and References on Website. (www.4USCoal.com)
Price Platts East Coast: Feb 19, 2019 $188.00 at port tied to Platts East Coast 30 day Average forward
Mine Location: West Virginia, USA
Testing Companies: SGS and Standard Labs â?? Both within 2 Hour Drive See Website for contact info
24/7 Loading Dock: Load 100-120 Cars per day - Coal Sampler 2 times per car
Rail: Norfolk Southern Railroad (BUYER TO PROVIDE RAIL CARS) (See website for contact info)
Port: Lambert Terminal, Norfolk Va. - Unloading Coal Sampler 2 times per car
(BUYER TO BOOK VESSEL AT PORT - MAERSK â?? CMA -)
Laycans: March 20 â?? 28 â?? 2019 at Port
Payment: US Domestic Letter of Credit - From Top USA 10 Bank only - After Inspection and Testing â??
100% Payment on Site at Mine prior to Loading - USBANK
Airport: Charleston, WV USA (CRW) We provide ground Transportation and lodging
Languages: English, (Hindi & Bengali upon request) Mon thru Saturday 10:00 AM to 6 PM
Approved Export Zones: Export to India & China OK. NO EXPORT TO EUROPE OR BRAZIL!
OFFICE PHONE: 00-1-833-4US-COAL (00=1-833-487-2625) 10 AM â?? 6 PM EST Dan Hart (Partner)
CELL PHONE CALL OR TEXT: 00-1-304 634- 5156 10 AM - 6 PM EST Ric Widdifield (Partner)
Email: sales@4USCoal.com Website: www.4US-COAL.COM
NOTE: WEBSITE WILL BE DOWN INTERMITTENTLY FOR REDESIGN AND NEW DATA THRU 2/21/2019
NOTE: WE ARE SEEKING AN INDIAN JOINT VENTURE PARTNER TO BUILD A LIMESTONE QUARRY!