'The AS LED Luminaire is GreenStarâ second-generation utility-grade Luminaire. Designed to perform in both demanding Roadway and Area Lighting projects. It is ideal for both retrofit and new construction and has a sleek, modern, architecturally pleasing design. An area arm is available for parking lots, auto dealerships, and other area lighting designs where aesthetics are important. This innovative design produces light output equivalent to a 200W'500W HID and provides energy savings of 65% or greater.
The DS Series Luminaire is designed as a direct upgrade replacement for traditional dusk -to-dawn security light units. The Luminaire offers easy mounting. The rugged, corrosion -resistant, die-cast aluminum housing is outfitted with stainless steel hardware and an epoxy coating that offers an extremely long service life and excellent weather resistance. The DS offers multiple light distribution options to improve the visual experience for your specific application. While not commonly available on traditional HID or competing LED products, the DS offers a full line of roadway distribution patterns.
666 Luminaires Suppliers
Short on time? Let Luminaires sellers contact you.
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex.
Technical description: luminaire consists from body, basic plate and
Flange with protective glass. Body and flange are castings from grey cast
Iron treated with polyester powder paint. Luminaire can be suspended
By the steel pendant with 2 eyes o 18 mm on the upper part of the
Body. Connecting area (increased safety „d“), with connecting clamps and
2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16
Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed
With cover from grey cast iron. Steel basic plate with electric parts
And reflector is fixed in the body. Flange with glass cover is screwed
In the body and secured with locking screw and silicon sealing
Against unlocking, thread shapes a rift of flameproof enclosure „d“.
Protective hardened glass resistant against mech. Shock min. 7 j is
Fixed to the flange, the connection is filled with polyurethane putty.
A steel hinge is fixed to the flange as the mobile one and enables to
Hang the flange during mounting or dismounting. Steel parts are
Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak.
Luminous sources:
Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w
Luminaire consists of body, basic plate and
Flange with protective glass. Body and flange are made of alsi alloy
Treated with polyester powder paint. Luminaire can be suspended
By the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables
O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
Aluminium basic plate with electro-module mounted inside the
Luminaire. Electro-module consists of 20 x led cree xp-g (luminous
Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000,
Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and
Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing
Output current of the led driver 700ma/350ma. Flange with protective
Glass is screwed in the body and locked with securing screw; thread
Shapes a rift of flameproof enclosure „d“. Protective hardened glass is
Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection
Is filled with polyurethane putty. The mobile steel hinge is fixed to
The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak.
Technical description: luminaire consists from body, basic plate and flange
With protective glass. Body and flange are castings from grey cast iron treated
With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the
Upper part. Connecting area (increased safety „d“), with connecting clamps
And 2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland
No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from
Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the
Body. Flange with glass cover is screwed in the body and secured with locking
Screw and silicon sealing against unlocking; thread shapes a rift of flameproof
Enclosure „d“. Protective hardened glass is resistant against mech. Shock min.
7 j and is fixed in the flange, the connection is filled with a polyurethan putty.
A steel hinge is fixed to the flange as the mobile one and enables to hang
Up the flange during mounting or dismounting. Steel parts are galvanized
And chromated. Luminaire is equipped with protective guard from galvanized
Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting
Terminal block enables interchanging 2 phases (4-core cable). Luminaire
Is equipped with 2 inner and 1 outer earthing clamps for conductive connection.
Luminaire is designed as the through-way one, when used as end piece, there is
Necessary to use blinding plug (optionally on order). Packing carton is filled with
Polyurethane foam instapak.
Luminous sources:
Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next
2G Ex de IIC T3-T6 Gb
II 2G Ex t IIIC Tmaxsurf.-table Db
Technical description: Luminaire consists of body, basic plate and
flange with protective glass. Body and flange are castings from AlSi alloy.
Steel hinge with eyes o 18 mm is fixed on the upper part of the body.
Connecting area (increased safety „e“), with connecting clamps and 2
cable glands HSK-K-Ex M25x1.5 for cables o 9 – 16 mm (HSK-M-Ex for
cables 10 – 16 mm for versions F), is placed on the side of the body. This
area is covered with cover and sealed with silicon. Steel basic plate with
electric parts and reflector is fixed in the body. Flange with protective
glass is screwed into the body and secured with securing screw against
unlocking; the thread creates a rift of flameproof enclosure „d“. Protective
cover from hardened glass is resistant against mechanical shock min.
7 J and is fi xed in fl ange; the connection is filled with a putty (polyurethane
glue). Steel mobile hinge is fixed on the flange and enables to
hang up the flange under body during mounting or exchanging light
source. AlSi parts of luminaire are treated with polyester powder paint;
steel parts are galvanized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting
terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and
1 outer earthing clamps. Luminaire is designed as through-way one. When it is used as the end piece, there
is necessary to replace one cable gland with blind screw V-Ex or to blind one unused gland with blind plug
HSK-V-Ex (versions F: one cable gland must be replaced with blinding screw V-Ms-VMQ-Ex). Blinding parts
are not attached - delivered optionally on order only. Versions K are equipped with protective guard from
steel wire. All types can be equipped with lampshade (optionally on order only). Packing carton is filled with
polyurethane foam Instapak
luminous sources:
HWL 500W E40, SPC A T CL 250W E40, HQL 250W E40, NAV-E350 350W E40 and other.
NOTE ! Ballast box 205.1 can be used for HP Mercury and sodium lamps..
Ceiling mounted high efficiency fixture with A5 and A5 mirror louver.
Lamp: T8 or T10 fluorescent
Material:
Body: sturdy structure made from electrostatic powder coated steel sheet (thickness: 0.5mm).
Louver: special high reflective aluminum (imported from Europe, pre-anodize aluminium, thickness: 0.4mm, alloy: 99.85%, light reflection: 86%)
High quality polycarbonate lamp holder and starter holder (brand: BJB Germany).
High heat resistant wire (þ: 0.5mm).
Accessories and reflector are installed and maintained easily.
Warranty: 5 years
Standard:
Designed and manufactured in accordance with EN 6059
Construction:
Pressed & folded sheet steel
Pre treated and epoxy powder coated finish
Moulded end caps
German Alanod aluminium reflector
Moulded acrylic diffuser
Schools/ offices/ kitchens:
Designed as a modern fluorescent luminaire while providing functionality for a wide Varity of lighting solutions. The Uni T5 is high performance fixture with the latest technology providing energy efficient operation with a high light output ratio and a long service life.
Aluminum deep drown or Aluminum die cast outdoor Streetlights are used to light roadways and walkways at night and also is a raised source of light on the edge of a road which is turned on or lit at a certain time every night. All light fixtures have fixture body, a light Socket to hold the lamps and allow for the its replacement –which may also have switch to operate the fixture and also require an electrical connection to a power source often by using electrical connector.
5FT weatherproof emergency luminaires with sensor dimming function
The weatherproof emergency luminaires adopts LED chips SMD2835, so the LED emergency luminaires can achieve 130lm/w high lumen out put.
This Corrosion-resistant Weatherproof Batten Light has emergency function, able to ensure lighting for more than 3 hours in the event of a power outage.
The emergency battery of this Batten Lighting Fixture has a special clip-fixed housing, it's easy for maintenance and replacement.
The protection rating of this Weatherproof LED Batten Fixture is high up to IP65, has a high dustproof and waterproof performance.
Lamp Luminous Efficiency(lm/w):120
IP Rating:IP65
Warranty(Year):5-Year
Place of Origin:Guangdong, China
Color Temperature(CCT):3500-6500K
Color Rendering Index(Ra):82
Support Dimmer:Yes
Emergency Function:Yes
Lifespan (hours):70000
Working Time (hours):70000
Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout
2ft emergency waterproof luminaires single tube led linear lights high lumen Batten fixture
This single tube emergency waterproof luminaire  adopts SMD2835 chips, can achieve higher lumen out put. The tubes of this single tube led linear light� adopts bridge wiring design, no need to consider the power direction of the tube. It's easy for installation of the Linear LED Batten� Fixture. Besides, the huge terminal of the single tube led linear light� is easy for wiring.
This emergency waterproof� luminaire adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof.
"BAY STAR" Bay Light Luminaire made from Extruded Aluminium Profiles (Heatsink), Separate Driver Compartment designed to suit top maintenance, Epoxy Powder Coated Finished, IP-65 Protected, powered by LM-80 Approved (Ceramic Package) High Power LED with Constant current electronic driver with APFC as per SELV norms & with Additional In-built External SPD of 10kV.
Available with 75Watt, 100Watt, 150Watt, 200Watt, 300Watt
"AREA STAR" Flood Light Luminaire made from Extruded Aluminium Profiles (Heatsink), Separate Driver Compartment designed to suit top maintenance, Epoxy Powder Coated Finished, IP-65 Protected, powered by LM-80 Approved (Ceramic Package) High Power LED with Constant current electronic driver with APFC as per SELV norms & with Additional In-built External SPD of 10kV.
Also Available with 100Watt, 150Watt, 200Watt, 300Watt, 400Watt,
666 Luminaires Suppliers
Short on time? Let Luminaires sellers contact you.
