1. Modular pluggable technology, onsite maintenance free of tools.
2. Cellular and whole structure radiator, good heat dissipation performance.
3. Eutectic welding led light source without gold thread, free of risk of stopping work caused by broken thread.
4. Double coupling protection with ultra waterproof level.
5. Intelligent constant current driver with long life span.
6. Accurate design for distribution of luminous intensity, makes light uniform without glare.
7. Special structure design for easy and angle-adjustable installation.
Light Source: LED
Certificate: CE,ROHS
Avg Life(Hr): 50,000h
Emitting Color: White
Input voltage: AC100V¡«277V / frequency50¡«60Hz
Usage: Tunnel
IP Rating: IP67
Power Supply: AC
Fixture Material: Aluminum
Specialty:
* Adopting integrated Chip as light source with high lighting efficiency(70`80LM/W) ,high CRI(Ra>70),good quality heat dissipation,low light degradation.
* Aluminium alloy die cast sheel, good strength,high quality heat dissipation.anti corrosion and baking varnish surface,can be for outdoor using.
* Make a dedicated luminous intensity distribution design via the aluminium reflector,there are two options for lighting distribution,one is for focusing,another is for divergencing.
* Wide Input Voltage from 85V~265VAC,constant voltage constant current output,can start up at once,no flicker,lightning protection,PFC function available.
Characters: at the same illumination, the efficiency of led tunnel light is 80% less than traditional filament light, and long life span. Reasonable and reliable structural design, plenty of vibration tests to reduce the influence t to the lamps caused by wind pressure and moving cars. No glare, high light transmittance and impact resistance.
Features
Light source--high power led with higher light efficiency and good color rendering, no glare.
Drive--famous led driver, to ensure the reliability and stability of the lamp
Light distribution--professional design of light distribution, improving the efficiency of the lamp as well as luminous flux. Control and eliminate the glare, and ensure the safety of the traffic.
Heat dissipation--integrated structural of heat dissipation.By the hand of air convection, improve the heat loss to make sure the lower temperature of the lamp.
Structure--ingenious design of the structure, modular light source, and integrated heat dissipation to gain the lightweight.
Ip grade--high performance of water-proof structure, and ip grade reach ip65.
tunnel emergency led linear lights with high lm/w rating and no glare
This tunnel emergency led linear lights designed with high quality construction, white coating steel body and high transmission Polycarbonate diffuser.
The intensity of this emergency led linear lights is more high, and the protection rating is IP20.
This tunnel emergency led linear lights incorporating SMD LED technology to achieve a high lumen out put, impact resistant and reduce glares.
The huge terminal block of this tunnel emergency led linear lights is easy for wiring.
The safety hooks design of this tunnel emergency led linear lights is easy for installation.
Lamp Luminous Efficiency(lm/w):110
IP Rating:IP20
Warranty(Year):3-Year
Place of Origin:Guangdong, China
Color Temperature(CCT):6000K
Color Rendering Index(Ra):83
Support Dimmer:NO
Lifespan (hours):50000
Working Time (hours):50000
Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout
Dimension : 12000L×1900W×730H(mm)
Quality : One set
Structure : Hand push no power roller production line
Function and feature : This device is suitable for all kinds of LED street lights, tunnel lights electronic appliances, gas stove,
range hood, bathroom and other manufacturers, dedicated to gas appliances,
range hood, bathroom and other water assembly, stable, secure, reliable,
easy to operate.
Specification :
1. Body and frame : Frame and Tripod,Rod adopt 40X40 square tube made,Conveyor rollers using
L = 750mmF38 galvanized drum wall thickness 1.0mm. Branch arranged at
intervals of 100mm. Rack galvanized legs with adjustable foot cups.,and the
machine body is two meters per section.
2. Hand tooling plate: Specifications for the 800×60×15mm, 15mm high-quality plywood made of
high quality, high-quality anti-static soft surface leather paste, green T-tape sides
edging; across the board with 30 total tooling plate
3. Stands lighting : H-lamp mounted in the rack, use 40×20 square tube production, the connection
body of a lighthouse with 2000 ×50×25 spray duct connecting the power,per 2
meter, lighting choice of 40W single fluorescent tube bracket with cover ,
approximately every 1.3 meters to install a light tube, along the lines of bilateral
arrangement
4. Middle Stands: In light shelves located along Stands, for supporting the use of angle, width 300mm,
15mm compression using plate, face stickers bright green fire board.
5. Process card: On both side of line arrange the process card,using the H-type aluminum rail production,
every section with a A4 plastic paper.
6. Trachea : At the top of the lighthouse located along each side of the trachea; (of two), using 4
galvanized pipe, every meter an opening. (Quick Connector customer self-)
8. Ball table : Excessive tables at both ends using universal 1.2mm cold plate bending shape,
specifications for 1900 X850×730 (mm); surface evenly install universal bovine.
9. Working power: Using 2000 × 50 × 25 galvanized trough, located in the fuselage on both sides of
the drum, (of two) on each side of the way, the installation thirty-two socket (per meter / station to install a) bilateral use.
Dimension : 12000L×1450W×730H(mm)
Quality : One set
Structure : Automatic chain conveying ,Tooling plate conveying
Function and features:: This equipment is suitable for all kinds of LED street lamps and electronic
electrical appliances manufacturer, specialized in water assembly, the
power system using variable frequency speed control system, stable
performance, safety and reliability, simple operation.
Specification :
1. Driver device: Adopt 1.5 KW / 380 v motor, reducer
adopts 100 # 1:6 0, speed 1-5 M/minutes adjustable, PLC
control, head support using 40 x 40 x§2.0mm carbon steel
flat pass welding and into production, head seal plate using
§1.5mm A3 plate bending production.
2. Guide : Guide adopt 100 x 118 mm special aluminum guide rail, rail
link adopt A3 plate production , plastic-sprayed surface
treatment;
3. Transfer chain : Adopt Suzhou quality P = 38.1mm three times the speed chain, the whole
line arrangement;
4. Frame or skeleton: Adopt 40x40x§2.0 mm carbon steel flat pass welding
production, each support spacing is 2 meters.
5. Lighting system: Light pass support cold plate bending and become,
specifications for 50×25ק1.0 mm, 40 x 40 x§1.5 mm carbon steel
flat pass welding production , each 2 m one paragraph, in turn,arrangement
, lighting using 40 w single belt cover fluorescent lamp , lined up on all fronts,
the whole line about 16 sets of tubes.
6. Socket slot: Use 2000 x 50×25 galvanized wire slot, is located under the machine belt,
points on both sides installation three, two square socket (every 1 m/workstation
install one).
7. Line body gas
path: All line body gas circuit using four points galvanized control, and in each station
with a set of 4 points quick connector;
8. Wind batch chute: Each side fixtures are one propose to batch chute, adopt FD28 30 x28 aluminum ,
each station a rings.
9. Process card
frame: In the fixtures are intermediate set two way process guidance card frame, the H
type aluminum guide production, each station layout a piece of A4 transparent
looking board hard rubber sleeve.
10. Station blocker: Using QX - type I stop device, each block device with a foot valve switch control.
11. Top body flat
moving
machine: On-line body ends, lifting SMC lifting cylinder device, conveyor belt use§5mm skid
proof conveyor belt production, bilateral decorate, drive use Taiwan production
miniature constant speed motor, motor power for 90 w 1:25, realize tooling plate
cycle delivery, a total of four sets
Light Source: LED Item Type: Flood Lights LED Light Source: high power led chip Input Voltage(V): AC85-277V Lamp Power(W): 150 Lamp Luminous Flux(lm): 15000 Lamp Luminous Efficiency(lm/w): 100 CRI (Ra>): 75 Color Temperature(CCT): Cool White Beam Angle: 60 Working Temperature: -25 - 45 Working Lifetime(Hour): 50000 Lamp Body Material: Aluminum IP Rating: IP65 Certification: CE, RoHS Place of Origin: Guangdong, China (Mainland) Brand Name: ZENLEA Model Number: ZL-FL-3A CCT: 2700-7000k Optional Housing Color: Black Housing Bean patterm: 60 Size: 315*283*130 weight: 5.1kg Number of modules: 3 Application: Tunnel, Tennis court
This vapor tight luminaire adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof, intergrated the lastest SMD LED technology to achieve higher lumen output and protection rating,also reduce glares. It is available in 2FT/4FT/5FT with standard,sensor dimming and emergency version function options. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements.
Features
High-grade PC base and PC diffuser IP65 /IK10
Rated.
High transmittance(86%) PC diffuser.
220lm/w SMD2835 LED chip as light source
(approval by LM80).
Stainless steel/PC clips option
Huge terminal block(hole size 5.0mm) for easy
wiring.
Clip-fixed Driver for easy replacement and
maintenance
Surface mounted or hanging installation
5.8G HF Sensor dimming function (option).
Emergency function,battery with special
housing,quick maintenance the battery (option)
Linkable connection function(option)
Approved by CE ROHS SAA and C-Tick (RCM).
5 years warranty
Em consumption:106w/109w/134w
Power factor >0.95
Iiiumiaance uniformity>0.6
Beam angel:120degree
Working voltage : ac90v-264v
Frequency range : 50hz-60hz
Ip grade: ip65
Led working life -span >50000hours
70*36.5*37cm/46*34*66cm/46*34*66cm
Net weight/gross weight 6kg/6.5kg 2pcs in 1 carton
We are one of the earliest enterprise in LED lighting field. Our products including indoor and outdoor lighting, such as: solar_wind hybrid power LED street lamp, tunnel light, mining light, ceiling light, down light, spot light, Tri-proof light, 8U light, G24 light, flood light, candle lamp, light bulb & light tube etc.Thereinto the solar wind energy complementary system is excellent design with our sole patent. We do different outline design and special control function as your demands. We are an OEM supplier of LED light. I would like to attached some pictures and our best price for your reference. Hope you will be interested in our products.
We are one of the best supplier and professional manufacturer for LED light in China. We are one of the earliest enterprise in LED lighting field. Our products including indoor and outdoor lighting, such as: solar wind complementary power LED street lamp, tunnel light, mining light, ceiling light, down light, spotlight, candle lamp, LED light bulb & LED light tube etc¡.Thereinto the solar wind energy complementary system is excellent design with our sole patent. We do different outline design and special control function as your demands. We are an OEM supplier of LED light.
A? Project LED street lights, tunnel lights aging line machine
B? Dimensions 12000L×1700W×750H(mm)
C? Quality One set
D? structure Ring chain conveying, small car type independent testing aging, frequency control of motor speed
E? function The LED Street light and tunnel light aging line dedicated to the detection of sophisticated light LED products, LED lights through the high-pressure, atmospheric pressure, low pressure, shock experienced roaming voltage area. Voltage adjustment range. Use whole lamp which features sophisticated and intuitive, easy to operate, suitable for different varieties of LED lights. Power system frequency control system, easy to operate.
F? Specifications
1. Motor Speed motor : china Brand Bihebi, 750W Reducer :Chines famous Brand OU fei er ,WPS80 ,1:60 type specific speed :1:6 Frequency converter : Sino-foreign joint venture's Brand ShenDao 1 HP frequency converter, frequency conversion stepless speed regulation, the linear velocity of 0.3-2 m/min adjustable.
2. Structure The frame is 40×40 rectangular steel welding production;fuselage aging line using a dedicated special aluminum alloy;nose and tail curved seal plate is made of 1.5mm cold roll forming,galvanized legs with adjustable foot cups, body 2 m period.
3. Conveyor chain Shanghai Chain Factory produced using eight points double pitch chain holes.
4. Aging trolleys Whole aging line about 46 small circular trolley combination, of the upper and lower structural design, easy aging different products:Trolley outside dimensions: length 550 × width 440 × height 430 (mm); using double-layer structure.
5. Light blocking shield Located on both sides of the line all the way to block all decent light shield (except non-electric operating area), using 4mm combined with tinted plexiglass plate made of aluminum alloy. Effective energy-saving lamps light attenuation and better protect the eyes.
6. Conductive Systems: In the aging body frame along each side of the car is equipped with two(zero, Fire Wire)conductive grooves along the bilateral arrangement.
Model number Tls-cw/50w-4c
Voltage input Ac85;171;260v 50-60hz
Color for the housing Black
Power efficiency ;y87% with life over 40, 000 hours
Total harmonic distortion ;¨¹ 9 %
Power factor(pf) Input voltage =ac100v, pf;y0.99¡ê187;input voltage =ac220v, pf;y0.95
Power 50w
Color rendering index Ra70-80
Light color Pure white
Working temperature ;a40;230;;171;¡ê171; 55;230;/10%;171;95%rh
Storage temperature ;a25;230;;171;¡ê171; 65;230;
Protection grade Ip65
Housing and refector Aluminium
Led chip Chimei(36*36) chimei(45*45) bridgeiux(45*45) epistar(35*35)
Led working voltage Dc30-37v, constant current 2.8-3.0a
Model number Tls-cw/50w-4c
Carton box (l, w , h) 46*34*42.5cm
Quantit
Led type: high power led cree xr-e
Luminous flux: 8, 000lm
Led efficiency: 80lm/w
Beam angle: 70 to 140 degrees
Power factor: íp0.95
Ingress protection: ip65
Original dimmable design in tunnel lighting
Governmental authority approval
Free of high order harmonic
High power factor
Excellent heat sink solution
Input voltage: 220v ac í+15, 50hzí+2
Operating temperature: -40 to 60ó¬c.
50w, 100w and 200w for you to choose.
106379 Led Tunnel Light Suppliers
Short on time? Let Led Tunnel Light sellers contact you.
