Fishing multifunction type dlq is a new and ideal fishing tool for cleaning the bottom of well. It integrates the functions of fishing cup, fishing magnet and claw fishing basket into an organic whole. Therefore, it can be used for fishing fallen substances of metal particles or for clawing the large-sized gear wheel and tongs tooth.
Od range: 5-5/16 ~15
Od of mill: 5-7/16 ~ 15-1/8
Connection: api
Suitable well diameter: 6 ~17-1/2
Magnetizing weight (lbf): 1, 350~6, 300
Overall length (ft-in): 3 6 ~4 8
DeRun Energy Co could provide different kinds of fishing tools: releasing and circulating overshot, releasing and reversing overshot, releasing slip spear, reversing sub, taper tap, die collar, internal hook, external hook, reverse circulation fishing magnet, junk sub, milling shoe, impression block etc.
During drilling and completion and workover operations, drill rods, drill collars, casings, tubing strings are stuck or broken, drill bit cones are dropped, logging tools or cables are stuck, cable wire ropes are broken, packers are broken Interruption of normal drilling, workover, and completion operations due to stuck, sand, serious leaks, well collapse, blowout, etc., need to use fishing tools or take special measures to remove leaks, collapse, stuck, spray to resume normal operations. The operation and process of removing leaks, collapses, jams, and sprays is called "fishing."
138961 Fishing Tools Suppliers
Short on time? Let Fishing Tools sellers contact you.
1.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
Operation:
Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.
2. Reverse Circulation Fishing Magnet:
Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.
Construction:
Reverse Circulation Fishing Magnet Assembly consists of lifting bail, top sub, housing, magnet element, pole plate, standard flush guide, and steel ball. When using we can select an appropriate guide.
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
Operation:
Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.
Optional Accessories:
A flush guide is standard. Lipped guides and mill guides are also available. The lipped guide centralizes the fish to assure contact with the magnet. The mill guide enables milling of any soft formation or settling to free debris at the bottom of the hole.
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
Operation:
Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.
Optional Accessories:
A flush guide is standard. Lipped guides and mill guides are also available. The lipped guide centralizes the fish to assure contact with the magnet. The mill guide enables milling of any soft formation or settling to free debris at the bottom of the hole.
Releasing and Circulating Overshot
1) Delivery on time
2) Standard export package
3) API-7-1 Standard
LAKE LT Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can't be release from stucking, we should release the overshot and lifting the drill string.
LAKE Reverse Circulation Junk Basket (RCJB) is designed to remove all types of small junk objects from the hole. The tool�¢??s main feature eliminates pulling a wet string. Even when the tool is fitted with a magnet insert, reverse circulation is maintained.
Operation:
LAKE Reverse Circulation Junk Basket is made up to the bottom of the fishing string and lowered to a point within several feet from the bottom of the hole. Begin circulation to wash the hole. Stop circulation and drop the steel ball. (When the steel ball is dropped into the valve seat, circulation fluid travels outward and downward through the inner passage of the barrel and out through the vents in the lower end. The fluid is then deflected to the center of the tool and up through the return holes in the upper end of the barrel. This reverse fluid circulation carries the junk into the barrel above the junk catcher.) Begin circulation again, slowly rotating while lowering the tool until a 10�¢?? core has been cut. Stop rotation and circulation and pull the tool from the hole.
Washover proceed is the efficient way for freeing the stuck accidents during the downhole operation. It is almost suitable for various stuck accidents. When the stuck accidents happen in downhole, it can free the stuck tools in short time, releasing you anxiety.
Washover pipe is the necessary tool for doing the washing operation. It adopts the connection of high strength pipe material and two-stage thread to assure the requirement of washing, avoiding some phenomenal such as the screw thread slipping, leaking, pipe breaking off, sticking pipe and so on which occurred by using common pipe. Therefore, it satisfies the need of the washing operation that the specifications of ordinary wash over cannot meet. For instance, washing the drill collar 8"in the 9 5/8"borehole and the drill collar 7"in the 8 1/2"borehole.
The two-stage thread used on the wash over pipe is a new-type connection, producing in the 80s in America. Especially, the special wash over pipe is a serial product.
Our Services
For more information, you can contact me :
Washover pipe is a special tool to release the stuck section of drill string in the well bore. TIANHE offers a complete range of washover pipe in the industry. TIANHE unique FJWP thread is a two-step double shoulder thread which assure quick make up and high torsion strength.
Washover pipe accessories:
Drive Sub
Drive Subs provide the crossover connection between fishing string and the washover pipe. Each is machined from high-grade alloy steel and heat treated to provide maximum strength and durability.
Lift Plug
Lift Plug is designed to provide an economical method of handling washover strings. It is available in all thread types and size, has sufficient shoulder diameter to support handling the washover string.
Washover Safety Joint
Washover safety joint is manufactured to provide safe and easy release and make-up whenever disengagement from the washover string becomes necessary. This dependable, field-tough tool is designed to transmit torque in either direction when placed in the washover string.
Rotary Shoes
Rotary Shoe are manufactured from specially heat treated alloy to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore.
HL-5001
Fishing pliers
1) materials: 3cr13, or according to customers' requirements
2) surface: fine polished, or according to customers' requirements
3) handle: comfortable, can be used with legerity
4) sizes: 12. 5cm 14cm 16cm 18cm or according to customers' requirements
5) customers' designs welcomed
6) OEM orders welcomed
Packaging: each piece put in a plastic bag.
10 pieces put in a small paper box.
300 pieces in a big box.
(or according to your requirements)
The Lake Fishing Magnet is a junk retrieval tool designed to effectively remove metal particles, shavings, and debris from the bottom of the well bore.
The process of retrieving small, oddly shaped objects is one of the most frequent and most difficult fishing jobs.
Typically, these objects are the result of bit failures that leave cones and cutters in the hole, or are an accumulation of mill cuttings, or are simply accidental droppings of unmillable objects into the hole.
In these cases, the fish is nearly always an odd-shaped object that cannot be engaged in the normal manner.
Fishing magnets successfully remove these small objects from the hole bottom. The tool's design incorporates generous circulation holes that wash away the cuttings and other debris that other wise would prevent contact with the magnet.
Fishing magnets can be run on either wire line or pipe.
Basic Information
Place of Origin:
China
Brand Name:
bee brush
Certification:
ISO
Model Number:
SS-BS-05
Minimum Order Quantity:
200 Piece/Pieces bee brush for Bee supplies
Price:
US $0.9 - 2.5 / Piece
Packaging Details:
bee smoker for Bee supplies 10pcs/carton
Delivery Time:
7business days after payment received
Payment Terms:
T/T, L/C, WESTERN UNION
Supply Ability:
50000 Piece/Pieces per Month bee smoker for Bee supplies
Basic Information
Place of Origin:
china
Brand Name:
super-sweet
Certification:
ISO
Model Number:
hivetools
Minimum Order Quantity:
100
Packaging Details:
CTN:40*30*30cm 50PCS/CTN NW:13kg GW:14g
Delivery Time:
5 WORKING DAYS
Payment Terms:
Western Union, MoneyGram, T/T
Supply Ability:
100000PCS
138961 Fishing Tools Suppliers
Short on time? Let Fishing Tools sellers contact you.
