Find Verified Distillate Fuel Oil Suppliers, Manufacturers and Wholesalers

FDR-0401 Distillate fuel oil oxidation stability tester
Scope
Distillate fuel oil oxidation stability tester side given instrument (accelerated method) according to SH / T0175-94, ASTMD2274 and other standards to determine the initial boiling point of not lower than 175 , 90% point distillation temperature no higher than 370 of middle distillate fuels inherent stability and performance of the oil. I.e., in the case of an active metal surface and the water or dirt and other environmental factors do not exist, the sample is exposed to the atmosphere in the ability of anti-change.

Features
1, the fixed value regulator valve to provide a constant flow of oxygen test.
2, thermostatic bath, large capacity, good insulation properties, and can make six samples tested.
3, oxidation tube with radial clamping, easy operation and reliable.
4, the camera obscura after the oxidation test tube directly into which were cooled at room temperature
5, sample oxidation time automatic control, when the alarm system.
6, the instrument uses metal bath, heating speed, good stability, environmental protection

Technical Parameters
1, oxidation flowmeter: Six oxidation test flow meter can be adjusted individually, the test flow rate: 50 ± 5ml / min.
2, constant temperature bath: the use of FLD metal bath.
3, the thermometer: in line with GB / T514-83 standard, WLH-33C, 50-100 , 0.5 indexing rod
4. Temperature control mode: automatic heating, automatic temperature control
5, temperature accuracy: 95 ± 0.2
6, oxidation tube: borosilicate glass, in line with SH / T0175-94 standard
7, electric heaters: when the main heater 220V 2500W, auxiliary heating 800W.
8, the regulator valve oxidation: oxidation is the oxidation stability, in front of the flow meter with regulator valve

Scope
Distillate fuel oil oxidation stability tester side given instrument (accelerated method) according to sh / t0175-94, astmd2274 and other standards to determine the initial boiling point of not lower than 175 ?, 90% point distillation temperature no higher than 370 ? of middle distillate fuels inherent stability and performance of the oil. I.E., in the case of an active metal surface and the water or dirt and other environmental factors do not exist, the sample is exposed to the atmosphere in the ability of anti-change.

Features
1, the fixed value regulator valve to provide a constant flow of oxygen test.
2, thermostatic bath, large capacity, good insulation properties, and can make six samples tested.
3, oxidation tube with radial clamping, easy operation and reliable.
4, the camera obscura after the oxidation test tube directly into which were cooled at room temperature
5, sample oxidation time automatic control, when the alarm system.
6, the instrument uses metal bath, heating speed, good stability, environmental protection

Technical parameters
1, oxidation flowmeter: six oxidation test flow meter can be adjusted individually, the test flow rate: 50 ± 5ml / min.
2, constant temperature bath: the use of fld metal bath.
3, the thermometer: in line with gb / t514-83 standard, wlh-33c, 50-100 ?, 0.5 ? indexing rod
4. Temperature control mode: automatic heating, automatic temperature control
5, temperature accuracy: 95 ± 0.2 ?
6, oxidation tube: borosilicate glass, in line with sh / t0175-94 standard
7, electric heaters: when the main heater 220v 2500w, auxiliary heating 800w.
8, the regulator valve oxidation: oxidation is the oxidation stability, in front of the flow meter with regulator valve

Waste Oil Distillation Plant is project of Doing group use the sludge,waste engine oil, tyre pyrolysis oil,plastic pyrolysis oil, sump oil as raw material, use the special distillation and refining technology to get oil. Waste Waste oil to diesel fuel oil distillation plant can make the oil yield reach as high as 80%-90%. Our company is in the leading level in machinery, technology. marketing, research and development.www(dot)doinggroup()dot

Waste oil to diesel fuel oil distillation plant is self-shunt vacuum distillation unit, distillation system uses a tube furnace (independent research) heating the continuous distillation process under negative pressure to be waste oil distillation.Because the waste oil contains large amounts of water so we should dehydration before distillation.For example, the raw material ( like used engine oil) recovery is more than 90% when the water percentage is less than 5%.www(dot)doinggroup()dot

Waste oil to diesel fuel oil distillation plant can be used for refining waste oil, waste engine oil, sludge, pyrolysis oil (tyre pyrolysis oil and plastic pyrolysis oil) and sump oil into qualified diesel fuel. And the diesel oil can be directly used in low speed engines and generators.

z

Product Name: DISTILLED NOW MARINE FUEL OIL RMG 380
Price from $100 to $600 depending on product feature
Quantity: 15,542 KG DISTILLED RESTORED MARINE FUEL OIL RMG 380
Minimum order: 15,542 KG
Packaging: According to Customers' Request
Example: Available. Sample Cost by Buyer
The product is in our warehouse in KOCAELA-TURKEY.
Origin : TURKEY
We are open to a price offer.
We help with shipping
If you wish, you can come and see the product.

What is RMG 380 fuel?
Under the ISO specification, RMG 380 are bunker fuels with a maximumviscosity of 380 CST, sulfur content of 4.5% and density of 991 kg per cubicmeter. RME 180 are bunker fuels with a maximum viscosity of 180 CST, sulfurcontent of 3.5% and density of 991 kg/cu m.

Competitive advantages
competitive rate
on time delivery
Quality assurance
Used in major industries

KAAN BEY CORPORATE Turkey's first petcoke export company.
The petcoke we export is produced at the Refinery in Turkey and contains high sulfur.
Our tonnages are min. Ships of 5000 mt and 50,000 mt DWT are loaded from ports in the Gulf of Izmit.

Note Our company can also organize the necessary purchases for large orders.
Why U.S ?
Product variety
As a company, we help our valued customers with our rich and high quality product range.

Quality Service and Quality Product
We ensure that our customers comply with quality standards (ISO-CE) by meticulously checking each product during the production phase. The importance we give to quality and details increases your trust in us.

on time delivery
As a company that manufactures with the awareness of the importance of timely delivery, we always take care to deliver our products on time.

R&D
It is always our source of pride to serve you, listen to you and make business plans with you in every product we sell, which is a privilege of the service we offer as service quality.
We seek our customers' feedback and satisfaction as more satisfaction.
regards
Thank you

JET FUEL , EN590, D2, D6, ETC.

DIP AND PAY PROCEDURES FOR FOB - Non-Negotiable) - KAZ Origin - Code: HT025
* ICPO - CI
* Seller issues POP : TSR, STAT. OF PRODUCT AVALIBILITY, ATV, DTA.
* Buyer extends Seller's Tank and makes arrangement for Dip Test Schedule.
*Buyer Conducts Dip Test on Seller's Tank at Buyer's expenses & Buyer makes 100% payment for the first trial lift via TT wiring and Seller transfer title ownership of the product to the buyer. Buyer lift product into Vessel or completely take over seller's tanks for further product storage.
* Seller issues final agreement to Buyer to review contract on R&E Monthly Deliveries,
* Buyer reviews and approves contract and issued SBLC/ DLC Irrevocable, Non-Transferable, Auto Revolving for 12 months shipment value, Documentary Letter of Credit for length of Contract and for each lifting as schedule
* Buyer pays after successful Dip Test by MT103 wire transfer on each Monthly delivery.
* The Subsequent delivery shall commence according to the terms and conditions of the Contract and Seller pays

Clients can recover oil products that can be sold to providers of virgin oils and lubes. Used Oil is used lubricating oil from automotive, ships, industrial cranes etc.

We will provide turnkey reprocessing plant. This includes:
Process Design; detailed engineering; fabrication and supply of equipment, piping, tankage etc.; shipment of turnkey plant to client site; assembly and erection; commissioning.
Continuous Reprocessing; capacity from 500-4000 gallons per hour.

As per plant requirements. We will ship semi-assembled components in containers.

Lime Oil Distilled, Citrus Aurantifolia Peel Oil Distilled is an essential oil distilled from the acidic epicarps after the pressing the juice from the fruit of the Lime. It contains mainly D-limonene and up to 7% alpha-terpineol.

Jet A-1 Aviation Fuel - Commercial Grade Supply

We offer Jet A-1 aviation turbine fuel for commercial airlines and cargo operators. Our product meets international ASTM D1655 and DEF STAN 91-91 specifications, ensuring high thermal stability and performance. Sourced from certified refineries and terminals, available on CIF or FOB basis from major ports including Rotterdam, Houston, and Fujairah. Minimum order: 2,000,000 barrels. Full documentation and SGS inspection provided.

Request pricing, Soft Corporate Offer (SCO), and procedures today.

Malaysia Rapeseed Oil (not Russia)
CIF U$980-1060ï¼?could provide maximum 21-24 MT/month. Provider is US big company.
This is NOT 100% confirmed so far (too welcome). Need your realistic LOI within 12 hours, otherwise it's invalid.

JET FUEL A1 Origin: NON-SANCTIONED

We provide FOB TTT/TTV with full Proof of Product (POP) after Tank Storage/Vessel verification and CIF ASWP via SBLC/DLC Procedure.

Available quantities at: Rotterdam, Houston, Fujairah, Jurong, Qingdao, and Ningbo-Zhoushan

Please request our complete Soft Corporate Offer with updated pricing and procedures.

Palm oil is derived from the flesh of the fruit of the oil palm species E. Guineensis. In its virgin form, the oil is bright orange - red due to the high content of carotene.

Palmoil is semi - solid at room temperature; a characteristic brought about by its approx. 50 percent saturation level. Palm oil (and its products) has good resistance to oxidation and heat at prolonged elevated temperatures; hence, making palm oil an ideal ingredient in frying oilblends. Manufacturers and end - users around the world incorporate high percentages of palm oil in their frying oil blends for both performance and economic reasons.

In fact, in many instances, palm oil has been used as 100 percent replacement for traditional hydrogenated seed oils such as soybean oil and canola. Products fried in palm oil include potato chips, frenchfries, doughnuts, ramen noodles and nuts.

The oil palm produces two types of oils; crude palm oil (CPO) from the fibrous mesocarp and crude palm kernel oil (CPKO) from the kernels. Although both oils originate from the same fruit, palm oil is chemically and nutritionally different from palm kernel oil. It is one of the only two mesocarp oils available commercially, the other being olive oil.

In conventional milling process, the FFB's are steriliszed and the fruitlets stripped off. The loose fruitlets are then digested and pressed to extract the CPO. The kernels are separated from the fibrous mesocarp in the press cake and later cracked to obtained CPKO.


CHEMICAL COMPOSITION OF PALM OILS:

Crude Palm Oil is the richest natural source of Tocotrienols. The Malaysian Palm Oil Board (MPOB) has developed a special patented technology for extraction. The latest technology to purify Tocotrienols from the fruits of oil palm (Elais guineensis) was developed to produce a superior quality and purity.

PALM OIL

Palm oil, being a vegetable oils, is cholesterol - free. Having a naturally semi solid characteristic at room temperature with a specific origin melting point between 33'C to 39'C, it does not require hydrogenation for use as a food an ingredient.

CPO is deep orange red in colour due to the high content of natural carotenes. Palm oil is rich source of carotenoids and vitamin E which confers natural stability against oxidative deterioration.

Fractionation separates oil into liquid and solid fractions. Palm oil can be fractionated into liquid (olein) and solid (stearin) components.

Palm oil has a balanced ratio of unsaturated and saturated fatty acids. It contains 40% oleic acid (monounsaturated fatty acid), 10% linoleic acid (polyunsaturated fatty acid ), 45% palmitic acid and 5% stearic acid (saturated fatty acid). This composition results in an edible oil that is suitable for use in a variety of food applications.


WE SUPPLY IN;

PET 5 L
PET 1 L
25 L
Customer chice of parcking (T&C applicable)

we sell virgin coconut oil with good quality and large quantity

Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.

APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).

KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.

STANDARDS
API SP

RETAIL PRICE
30,600 THB (200 litres)
850 THB (4 litres)
205 THB (1 litre)

Jet A1 Fuel suitable for commercial and military aircraft, compliant with international aviation fuel standards (ASTM D1655 / DEF STAN 91-091). Sourced from non-sanctioned refineries.
Supply Capacity: 2Mâ??5M barrels per month

SGS Inspection at load port

No advance payment required

Monthly & long-term contracts available

Delivery to global ports (Jurong, Fujairah, Rotterdam, Houston)

Origin: Non-sanctioned countries only

Secure payment via TT/ MT103 / SBLC

FFA (as lauric) - 65% min.
Moisture & Impurities - 2.0% max.
Iodine Value (WIJS) - 15% max.
Saponification Value - 250 min.
Total Fatty Matters - 95% min.
Acid Value, mgKOH/gr - 182 - 205

Lemon balm essential oil (also known as Melissa essential oil) has a great variety of possible effects. The word 'Melissa' is Greek for 'honey bee', Melissa having been planted near bee hives to produce the most delicious honey. Lemon balm oil is considered one of the most powerfully medicinal essential oils in all of aromatherapy, with a wonderfully pleasant sweet, herbaceous aroma.

A great deal of oil sold as lemon balm today is actually a blend of lemongrass and citronella oils - 'true' lemon balm oil has its own unique aroma and properties.

Rose oils are extracted from the Rosa damascena (Bulgarian) and Rosa centifolia (Moroccan) also known as 'rose de mai'. Rose Otto is the essential oil steam distilled from fresh roses.

Rose concrete a solvent extraction of fresh roses. Rose absolute is extracted from the rose concrete using alcohol. Rose Otto is distilled from the Bulgarian rose or Rosa damscena. The Otto is an almost clear pale yellow liquid. When it is very cold it solidifies but it is easily warmed to liquid again.

Rose Otto smells rich, floral, warm and spicy with honey undertones. The smell of fresh roses becomes more apparent at when the Otto is diluted. Rose Otto is the most expensive extract of roses. Rose concrete from Rosa damscena is a deep orange colored mass of a jam-like consistency, can be greenish yellow.

The high quality bulgarian rose oil gained its producers scores of medals and diplomas from many exhibitions and fairs.

The rose valley in bulgaria, near the town of kazanlak, is among the major producers of attar of roses in the world.
Thanks to the specific geographic and climate conditions favorable temperatures during february, when blossoming buds formed, the maroon forest soils and frequency of the rainfalls during the rose picking in may and june, more than 3 centuries had been cultivated the famous all over the world bulgarian oil rose. This rose is used for producing the incomparable bulgarian rose attar.