High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm
Key Properties of Copper Alloys
Excellent heat conductivity.
Excellent electrical conductivity.
Good corrosion resistance.
Good biofouling resistance.
Good machinability.
Retention of mechanical and electrical properties at cryogenic temperatures.
Non-magnetic.
In the form of Sheets, plates, strips, pipes & fittings from South Korea & China. Nickel Alloys, brass, bronze, Stainless steel are the other materials we offer.
Price: -17%LME
Origin: United States
Delivery: FOB
Payment terms:15% down payment through bank transfer followed by an irrevocable & confirmed documentary letter of credit payable against documents at the seller's bank.
73764 Copper Alloy Suppliers
Short on time? Let Copper Alloy sellers contact you.
We are Manufacturer of high grade Copper & Aluminium based Alloys Ingots, Billets
We manufacture all grades of Al & Cu Alloys viz. Gunmetal, Tin Bronze, Leaded Bronze, Manganese ,Phosphorous Bronze Aluminium Ingots etc as per JIS, BS, ASTM, DIN, IS, EN & UNI STD.
Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures.
Available sizes:
Custom diameter & sizes, random mill lengths
International specification: ú¿¦·+O¦µ+¦ú¬
Rods/bars/tubes: astm b196, 251, 463; sae j461, 463; ams 4533, 4534, 4535; ams4650, 4651;
Rwma class 4
Strips:astm b194, ams4530, 4532; sae j461, 463
Sheets: astm b194
Wires:astm b197, ams4725, sae j461, 463
Plates:astm b194, sae j461, 463; ams4530, 4533, 4534, ams4650, 4651; rwma class 4.
European standards: cube2, din 2.1247, cw101c to en
Note:
Astm: american society for testing and materials
Sae: society of automotive engineers
Ams: aerospace materials specification (published by sae)
Rwma: resistance welder manufacturers' association
Note: unless otherwise specified, material will be produced to astm.
We can supply copper based alloy as per customer requirements
With the assistance of our skilled professionals, we are offering a quality tested array of Copper Alloy Ingots to our valuable clients. Our Copper Alloy Ingots is available in varied specification as per the different demands of the clients. They give trouble free performance to the user as they are stringently tested on.
Steel turnings: Machine shop turnings are clean steel or wrought iron turnings, free of iron borings, nonferrous metals in a free state, scale, or excessive oil.
HSS drill bits are made from carbon steel with the addition of other elements such as chrome and vanadium, allowing them to be used at high drilling speeds. HSS bits can be used to drill iron, steel and other metals such as brass, copper and aluminum alloy. They can also be used to drill plastic.
HSS chip and inserts
HSS Grades: M2 scrap, M1 scrap, M7 scrap, M42 scrap, T-15 scrap, D2 tool steel scrap
Copper+Nickel Alloy
Pipe consisting of copper and nickel alloy; it is proper to use at high temperature due
to its high degree of corrosion and seawater resistance.
Application: It is mainly used in engine components, condensing engines, or sheaths. 25% nickel alloy is used to coins, 40% nickel alloy (constantan) is for thermocouple or electricity resistance wire. The monel metal that consists of a small amount of iron and silicon and 60-70% nickel alloy is used to turbin wings, valves or components of mine
machines because it has a high degree of corrosion resistance and gets less damaged
at high temperature.
Manufacture alloy bars in various shapes and sizes by extruding and drawing of billet.
Copper Alloy Bar - Forged Bar : C3771/KSD5101
Copper Alloy Bar - Free Cutting Bar : C3604/KSD5101
Copper Alloy Bar - Naval Bar : C4622/KSD5101
Mainly used to produce vessel parts or shafts due to its high degree of corrosion and seawater resistance.
Draw a billet, a primary processed goods, to make it a circular pipe. Reconduct
drawing to produce brass tubes in various shapes and sizes.
Copper Alloy Tube has a fine degree of Mechano-Luminescence property and plating
and drawing performances. It is lead-free and mainly utilized as a material for heat
exchanger, faucet or fire extinguishing unit.
Decide after checking dies production.
Jointless Copper Alloy Tube C2600/KSD5301
We offer copper alloy brazing rod. These alloys have been used for thousands of years. these alloys are highly ductile and malleable and can be easily worked.our organization procures the best quality raw material available in a wide range of compositions in order to suit the specific applications. these alloys are fully oxidized to retain the gloss and provide longer life service.
Bi-metal strip (sheet/plate) backed with high quality low carbon steel and sintering bronze powder on the surface,is forming by several time high temperature sintering and extrusion rolling. Then it can be produced into bushing by blanking, rolling, forming, sizing, tinning and other machining.
With excellent wear resistance and good physical and mechanical properties,this kind of bi-metal strip (sheet/plate) is a kind of ideal ease-friction material, applying to producing sliding bearing, thrust washer, lateral plate, bearing bushing and other mechanical components, especially in auto industry.
35kg/bag With Waterproof Paper.
73764 Copper Alloy Suppliers
Short on time? Let Copper Alloy sellers contact you.
