Charge modeïPWM
System voltageï12V
Charge current: 8A/10A
Load output voltage: 12V
Battery typeLead acid (GEL, AGM, flooded)
Application
1. The household solar power systems
2. Small solar power system
3. The portable solar application products
1.Electronically regulated charging regime: Boost and float charge
2.Emperature compensation
3.Deep discharge protection
4.PWM series regulation, no panel short circuit
5.Fully electronically protected: panel surge voltage, Wrong polarity at panel or battery,
Overload and short circuit at load
6.LED indications: Charge status, SOC, LVD, Overload/Short-Circuit Common positive allows
grounding
3. Charger :
3.1 poe charge current : 0.85a (max)
For load first, only the balance used to charging.
Only work with battery connected.
3.2 poe input watts : 30w(min)
3.3 poe input compliant to 802.3at, all 4 pairs available, giga.
3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Product introduction:
1, solar street light controller can automatically adapt to 12V and 24V systems.
2. It has a dual-period control function (lit at night and before dawn) to meet the individual needs of customers for street lamps.
3. There are three kinds of load power supply modes: pure light control, light control on + delay off (single time), light control on + delay off - delay on + light control off (double time).
4. The dual-period solar street light controller adopts intelligent machine design. All work processes are controlled by software and can achieve high precision and high reliability.
5, using high-efficiency PWM charging technology, with high-precision temperature compensation.
6. The digital tube displays the operating parameters of the LED lamp.
7, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse and other full electronic protection.
8, the whole machine adopts full potting process, waterproof rating IP68.
(1)adopt advanced mcu design, conforming pwm charging controlling technology with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory fu nction: startup load mode and main circuit�??s working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Charge mode, pwm
System voltage, 12v/24v
Charge current: 10a/20a
Output voltage: 12v or 24v
Battery type, lead acid (gel, agm, flooded)
Application ,
1.Street light
2.Advertising lights
(1)adopt advanced mcu design, conforming pwm charging controlling technology, with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory function: startup load mode and main circuits working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
79748 Charge Controllers Suppliers
Short on time? Let Charge Controllers sellers contact you.
Product introduction:
1, MPPT lithium battery solar street light controller automatically adapts to 12V and 24V systems.
2, built-in boost type constant current source, the efficiency can reach above 95%.
3, with 4 working modes, working time and LED lamp brightness can be adjusted.
4, with infrared remote control function, all parameters can be set using a remote control key. Can also be used to set the button, directly 5, displayed on the digital tube.
6. The integrated street light controller has a smart power-down function to extend the working hours of the LED lights.
7. High-efficiency PWM charging technology is adopted to ensure that the battery is working in the best condition, which greatly prolongs the service life of the battery and has high-accuracy temperature compensation.
9, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse protection.
10, full plastic, metal body, waterproof and drop, to deal with various harsh environments.
Specially design for solar-public electricity system, which is in exchange of the solar system, it has power switch where there is a shock by the battery or utility grid, and also the utility grid supply charging module. Its energy saving, and also ensures the power supply. It also has the same function of eprc.
Specifications: 12v, 12/24v, 5a, 10a, 15a
Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation.
Industry level production standard, led indication on system condition.
The controller pcb is pained with england apl lacquer, its highly moisture-proof
The controller is designed for solar dc lighting system. There are several optional working modes, and has two output modes. Dc output modes and two time setting modes.
Specifications: 12v, 12/24v, 5a, 10a, 15a
Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation.
Industry level production standard, led indication on system condition.
The controller pcb is pained with england apl lacquer, its highly moisture-proof
Pwm charging
Direct, boost and float auto-charging modes.
Optimized control for intelligent adjustment of control parameters based on actual charging / discharging rates.
Led indication of system working status.
Temperature compensation, high precision digital temperature transducer.
Over-load and short circuit protections.
Rated charging current: 20a, 30a, 40a
System voltage: 12v, 12/24v, 48a
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
LCD display , easy to operate on LCD screen
Multi stage charging
(3-stage charging , parallel charging and equalized charging function)
BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit
MPPT solar charge controller with timer and battery type selection
Key Features
1)MPPT with conversion efficiency up to 99% under charging mode.
2)12V/24V/48V system auto recognize.
3)Controller with Intelligent design and free lifelong online upgrade service.
4)LCD and LED show parameters and system information,like PV input voltage,battery voltage.
5)With intelligent design,the device can be upgraded online lifelong.
6)Nominal maximum solar/PV input is DC 150V .
7)Three Stages Charge mode: fast charge, constant charge, floating charge.
8) With high efficient MPPT operation scheme and adopting TI28035 chip.
9) Support kinds of batteries:Gel,Sealed lead acid,vented,NiCd,etc.
10)Extensible LAN remote control.
11)With CE, ROHS, FCC, PSE certifications.
12)7 languages.
13)2 years warranty
1. Built-in LED constant current source.
2. With intelligent four phases PWM digital dimming.(power is 100%,75%,50%,25%)
3. IP68 waterproof degree.
4. The max output voltage is 70V, which can drive 20 LED lamps installed in series
5. Various protections.
Specification:
System voltage: 12V/24V Auto
Output current: 330mA ¨C 2310mA
No-load loss: 5mA/12V;7mA/24V
Solar input voltage: < 55V
The Max. charging current: 8A
Overvoltage protection: 17.0V; 2/24V
Equal charging voltage: 14.6V; 2/24V(25), duration:1h
Ascending charging voltage:14.4V; 2/24V(25), duration:2h
Float charging voltage: 13.8V; 2/24V (25)
Return voltage during charging:13.2V; 2/24V (25)
Return voltage for over-discharging:12.5V; 2/24V
Over-discharging voltage:11.1V; 2/24V
Temperature compensation :-4.0mv//2V;
Light-control voltage :Light-control open 5V; light-control close 6V
Efficiency of constant current:90% - 96%
Current accuracy:+/-2%
Light-control judgment time :10min
The Max. output voltage:70V
Working temperature:-40 to +70;
Protection level:IP68
Weight :160g
Dimensions ; 825820(mm)(LWH).
1. over-load protection
2.short circuit protection
3.reverse discharging protection
4.reverse-polarity protection
5.protection from the lightning strike.
6.under-voltage protection
7.over-charging protection
8.HVD setting when battery stopped working or charging.
9.LVD setting when load under voltage and stop working.
10. battery capacity display SOC
11. Renew setting of load-starting
12. intelligentize of temperature compensation
13.controller is always counting and saving the charging current hours and display on LCD screen.
14. controller is always counting and saving the discharging current hours and display on LCD screen.
The controller is designed for solar dc lighting system, there are several optional working modes, and has two output terminals, with separate time set.
Specification: 12v, 12/24v, 5a, 10a, 15a
Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation.
Industry level production standard, led indication on system condition.
The controller pcb is pained with england apl lacquer, its highly moisture-proof
Suunny solar charge controller is controlled by cpu, according to the voltage ofbattery, controller will adjust the charge current and decide if to supply the loads electricity. The following is the detailed performance:
Generally keep the battery on full voltage condition.
Prevent the battery from over-charging.
Prevent the battery from over-discharging.
Prevent supplying electricity from the battery to solar panels during nights.
Reverse polarity protection for battery
Reverse polarity protection for solar panels
When the current of load exceeds the rated one of controller, the controller will turn into the self-protection state and is automatically locked up, the screen shows overload.
Short circuit happens; the controller will turn into the self-protection state and is locked up, the screen show short circuit.
Low voltage happens to battery, the controller will automatically separate loads from system. When the voltage of battery goes up, the loads will automatically restart to work.
Protection from the lightning strike
When controller is normally working, the lcd screen will show new charging current (a dash-before the numeral) , discharging current and voltage of battery every 5 seconds.
