High quality and good surface quality to meet the updating request of pv development and reduce the production cost.
Crystal structuremono-crystalline
Crystal method cz
Conductance typep
Dopant b
Dimension125*125ía0.4156*156ía0.4
Diameter ª¦150ía0.4 ª¦165ía0.4ª¦200ía0.4
Crystal orientation <100>ía1
Resistivity( ª+.Cm) 1-3/3-6
Lifetime( ª8s) í²15
Carbon concentration( atoms/cm3 )ín5*1016
Oxygen concentration( atoms/cm3 )ín0.95*1018
Product name: 2-12 Inch Orientation 100/111/110 SSP Prime/Dummy Grade Silicon Wafer
Place of Origin: China
Material: Silicon
Diameter:2-12 inch
Thickness: 100-1500um
Orientation: 100/110/111
Type/Dopant: intrinsic or P/B or N/Ph
Grade: prime/dummy
Bow/Warp:
semiconductor si wafers
prime grade/high quality
diameter from 2" to 12"
ultra thin or ultra thick
crystalline orientation <100>, <111>, <110>
most resistivity range
1.Material: multicrystalline silicon
2.Growth method: directional solidification
3.Conductivity type: p-type (boron doped), astm f42
4.Oxygen concentration: n 1, 0x1017 at./cm3, astm f 121
5.Carbon concentration: n 1x1018 at./cm3, astm f 121
* oxygen content measurement by astm 1188 and used calculation coefficient for ppm atomic is 4, 9 and and for at/cm3 is 2, 45e+17.
6.Square side: (156.0 0.5) mm
7.Symmetry as per the drawing in the enclosure no. 1
8.Thickness: (200 30) µm, astm f 533
9.Ttv: < 50 µm, astm f657
10.Bow < 50 µm, astm f 534
11.Surface saw damage depth µm < 20 (< 15 typically)
12.Saw traces µm <5
13.Resistivity: 0.5 ¿c 2.0 Ω•cm, astm f 43
14.Minority carriers lifetime: > 2 µs, astm f 28
15.Surface: as-cut and cleaned; visible contamination, oil or grease, finger prints, soap stains, slurry stains, epoxy/water stains, cracks are not allowed; edge chips under 1 mm from the edge of the wafer are allowed.
.
16.Customer may request to receive reference samples
17.Wafers are being stacked into batches of 50-100 wafers each. Then it is sealed into polyethylene film. Protective paper among wafers is upon customer request. 500 -600 wafers in total are being packed into styrofoam box. Styrofoam boxes are being packed into pasteboard cases. Wafers are being packed in such a manner as to ensure minimal damage to the product during transportation.
18.All polystyrene boxes of wafers are identified with: box number; type of wafer; number of wafers per box; all contributing ingots numbers; thickness of wafers; date of packing / output inspection.
Geometry:
Square side angle:900, 5
Chamfer: 1, 5 mm0, 5mm at 452
Advantage of
156x156mm 200um High efficiency silicon wafers
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3
minority carrier:>2
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
top quality factory price 156x156mm 200um high quality High efficiency solar silicon wafers
Manufacturer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3s
minority carrier:>2 s
Hem width:157.00~157.25mm
Thickness:200±20m
Transfer efficiency:>18.8%
A container for carrying semiconductor wafers/silicon wafers, resistant to acid, alkali, and corrosion (strong acid, strong fluoric acid, strong alkali), capable of laser engraving, and able to install RFID. Maintain tracking of carriers and materials.
Mainly used for cleaning, using, and transporting wafers in the acid-base process of semiconductor etching departments.
#wafercleaning #semiconductor #Newenergy #wafers
Made of high-purity resin Teflon, it is resistant to strong acids and alkalis, and can withstand high temperatures: -200~+250C. The surface is smooth, non-stick, and easy to clean. Wafer Container specifications and styles can be customized.
Advantage of
156x156mm 200um High efficiency silicon wafers
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3s
minority carrier:>2 s
Hem width:157.00~157.25mm
Thickness:200±20m
Transfer efficiency:>18.8%
Advantage of
High efficiency P Type solar silicon wafers
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
There are 12 sets of WuXi ShangJi brand diamond wire slicing machines, 8 sets reforming machines, the single blade capacity is 20,000 pieces per day, and the annual production capacity is over 10 million pieces.
Advantage of
Hot Sales A Grade solar silicon wafers
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
There are 12 sets of WuXi ShangJi brand diamond wire slicing machines, 8 sets reforming machines, the single blade capacity is 20,000 pieces per day, and the annual production capacity is over 10 million pieces.
We can supply 156 mm Mono and Multi crystalline silicon solar wafers (A grade) with high quality and best price for large quantity.For specifications,price and further information,please freely contact us through email.
21367 Silicon Wafer Suppliers
Short on time? Let Silicon Wafer sellers contact you.
