Can be custom-made.
On/off lighting & defogger.
Detected temperature range:-50
Working temperature:-15
Resolution: 1
Mounting: snap-in
Fit in size: 137*28*32 mm
Temperature input: ntc sensor*2
S1(freezer) s2(defog)
Maximum loading as following:(resistive load)
Compressor 30a/250v
Double side planer:
Its high speed feed up to 40M/min.
High production ! Increasing your production profit !
There are two outfeed rollers and two table rollers provided at the outfeed end of the top cutter-head. All rollers are powered to assure more porwerful and stable feeding performances.
The powerful 5HP feed drive motor combined with inverter and gear reducer will handle the most demanding work. Its high speed feed up to 40M/min. It can provide extra powerful workpiece feeding and permit high-speed planning easily.
Product description
Exclusive diamond saw blade with good sharpness, high cutting stone accuracy, no collapse, no corner drop
Long cutting life, reduced blade replacement frequency, increased production efficiency
Wet cutting, effectively reducing the generation of dust, processing more environmentally friendly
Various of processing methods can be used for profiling, chamfering, etc.
Check the location of the water injection before use the saw blade, Hanging storage avoids rust
Take off the chipping spurting tube ( the chopper height is about 130cm) can movie under the low shelf. The radius of gyration is able to walk on the bad terrain, suitable shuttles back and forth in orchard. Available for 21HP and 23HP, max. chopping diameter 12cm -15cm.
Engine Type
Diesel Engine
Max.Power(hp/rpm)
21HP or 23HP
Braking system
Manual brake
Moving speed(km/hr)
Approx. 2.5(1)?4.9(2)?7.9(3)?2.4(R-shift)
Over-feeding device
When the feeding volume is too much, it will stop and remove the excess object automatically. When the feeding volume becomes normal, it will begin the feeding action. Thus, there is no need to stop the engine.
Discharging way
Upward type or downward type
Max. crushing
diameter
Diameter 12cm (21HP), 15cm (23HP), wet soft wood
Operation capability
(approx.)
Evaluated on straight trunk :
1000 Kg/hr (21HP), 1200kg/hr(23HP)
Note
Specification is based on actual machine. Our company reserves the right to modify the specification
We provide the most competitive saw blade for metalworking. Price and quality is always our principle. There have six types for various materials, ex: carbon, aluminum, iron, pipe!k etc. It!|s competitive that provide another choice to your customer. We believe that you will be satisfied with samurai saw blade.
We provide circular saw blade range from diameter 250 mm-520 mm. It's suitable for cutting carbon steel, iron pipe, copper, aluminum, stainless and so on
Double side planer:
Working width 635mm(25")
Equipped with digital positioning control
Equipped with helical cutter head (size : 15x15x2.5mm)
Quick thickness setting device
Slideways are lubricated by central hand lubricator
Feeding inveter with an additional gear reducer
Please visit our web site for more information.
Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
2 side planer:
Due to the lack of wooden material has increased day by day, how to recycle wood waste has become a key point of woodworking market competition.
To save wood waste, a planer with precise surface is the first important process during manufacturing. It is based on providing the same thickness material so that the result of final process will be more obvious. Due to this, it is our first chief job to develop super short material of double-side planer (min. Length 100mm).
Gt-400s is equipped with many different functions that can solve the
Problem of short material processing. We also design the operation mode for short or long workpiece. This can extend its function more efficiently. The completed equipment of gt-400s include special spiral cutter head, automatic digital position setting device for thickness, easy handling control panel for operation, atmospheric pressure device for pressing material and some patenting devices. Gt-400s meets customers needs and creates more profit for woodworking industrials.
Please visit our web site for more information.
Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
Two sided planer:
In the field of woodworking, for wider double side processing, we would like to provide you except the sanding machine another choice-1020 m/m (40!¡l) gtm-1020w
Double surface planer.
For ensure the smoothly processing, series gtm-1020w is designed supplely the feed- in from tip plug, and multi-spindle power transports feed-out. Our durable spiral cutter can cut woods in low noise and not easy to cause a stain on woods.
Gtm-1020w could complete double surface processing at one time with fast feeding (7m ~ 20 m/min). For the clamp board width within 1m, the light sanding after double side planning could reach the effect of one side sanding and one side surfacing.
Gtm-1020w contains several special parts that the traditional double side planer lacked, plus decades of professional planer machine produce experience to design and manufacture reliable products, no doubt that !¡±gtm-1020w!¡l will be your best choice!
Please visit our web site for more information.
Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
Automatic single planer:
The gt-400j is our new model with high speed bevel spindle auto jointer. High speed means feed speed is 8 to 40m/min; bevel spindle is designed to be suitable for short workpiece processing that minimum length of cut is 100mm. Auto jointer of gt-400j is like hand-jointer (only bottom spindle) but with automatic feed system.
Compare with hand-jointer, it is feed speed is very fast and the finished product is almost the same with hand-jointer.
Please visit our web site for more information.
Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
Wire straightening machine & wire cutting machine has a wire straightening system that may be a single/ double plane straightener or another multi-plane straightener. It may also include a wire guide, a wire feeder, and other processing components that are needed to achieve a desired material straightness. With over 10 years experience in developing the innovative straightening & cutting machine and the drill pointing machine, forng wey machinery co., ltd has developed a comprehensive range of machinery models to meet various requirements of customers.
Wire straightedge rolling machine: these machines as suitable for straight cutting processed products of non-metals & iron wires, such as welding rod, kitchen utensils, fan frames of umbrella, metal cages, cd racks, hangers luggage frames and other wire products.
1.Performance and high performance vertical machining center.
Supporting a variety of market applications processing, including automotive, motorcycle, electronic parts, mold, tool and die, and more.
This machine is designed for dimensions in precision,contour accuracy,surface quality and productivity.
Maximum dynamics,precision performance milling,and HSC machining are accurately executed.
This machine works for a wide range of applications including electronic watch,optical,medical,die mold,and mold marking industries.
