Find Verified Waterproof Paper Suppliers, Manufacturers and Wholesalers

Code 82600: Non-woven adhesive dressing with absorbent pad

Features:
1. Non-woven fabric laminated with released paper.
2. Hypoallergenic adhesive for sensitive skin.
3. Non-adherent film prevents absorbent pad from sticking to wound.
4. Porous and breathable.
5. Individually wrapped and gamma sterilized.

Color: White

Size: 6 x 7 cm (2.5''x2.8'')
10 x 10 cm (4''x4'')
10 x 15cm (4''x6'')
10 x 20 cm (4''x8'')
10 x 25 cm (4''x10'')

Code 85200: Made of non-woven fabric. Hypoallergenic adhesive, leaves little or no residue

Features:
Made by non-woven fabric.

Hypoallergenic adhesive, leaves little or no residue.

Porous and breathable.

Strong adhesion, yet easy to remove.

Color: White or flesh

Size: 1.25 cm x 9.14 M (1/2x10yds)
2.50 cm x 9.14 M (1x10yds)
5.00 cm x 9.14 M (2x10yds)
7.50 cm x 9.14 M (3x10yds)

Shieun Ta Industry Co., Ltd. established in 1981. We're professional in aerosol product design, OEM, and ODM, we also provide the professional suggestions for product accessories combined. 80 % of our products export to U.S., Middle East, Japan, Hong Kong, China etc. With commodious space, elevating capacity, human resource, facility upgrading; we provide integrity service and enormous capacity; persist product in best quality. Volume: 280ml/ other-can be customize Type: mist spray Scent: can be customize

Description
PU-850 is a one component, thixotropic, polyurethane waterproofing membrane where viscosity of the liquid is paramount. In applications such as sloped roofing,
flashing details and under tile waterproofing PU 850 cures to form a durable yet elastic membrane with strong adhesion to many types of substrates. PU 850 is
fast curing, and is tack-free in less than two hours, with exceptional elasticity. Due to it thixotropic, hydrophobic and elastomeric nature, PU 850 is the perfect solution to provide excellent waterproofing on vertical and sloped surfaces without running.


Use
- Shower Recesses - Bathrooms
- Laundries - Kitchens
- Balconies - Retaining Walls
- Planter boxes - Steel (suitably primed)
- Patios - Plasterboard
- Courtyard Areas - Brick
- Concrete, Cement render, plaster
- Wet area wall lining board
- Hardie/CSR sheet flooring
- Light weight aggregate block


Feature
â?¢ Easily applied onto vertical and sloped surfaces with no running OR bubbling.
â?¢ Excellent adhesion to most substrates.
â?¢ No thinning required.
â?¢ Excellent thermal resistance, never turning soft.
â?¢ Excellent cold resistance, remaining elastic to -40â?°c
â?¢ No accumulation of humidity under coating
â?¢ Excellent mechanical properties
â?¢ Highly stable, will not bleed through porous materials
â?¢ Bitumen free
â?¢ Highly elastic and stable.

Packaging
15 Litre pail

Consumption
1.2~1.5kg/m�²

Shelf Life
Unopened pails can be stored for up to 12 months in
a cool, dry and weatherproof environment.

DESCRIPTION
CP-320 is a fast-curing, two-component, bitumen-extended polyurethane fluid.
It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties.

FEATURE
Components easily mixed, fast curing
Its low modulus gives it excellent substrate crack-bridging properties
Excellent adhesion on almost any surface
Excellent thermal resistance, max service temperature 80
Resistance in the cold: Film remains elastic even down to -40
Good chemical resistance
Can also be used as a joint sealant

APPLICATIONS
Bathrooms, balconies, basements and rooftop
Gypsum and cement boards
Light roofing made of metal or fibrous cement
Non-potable water tanks
Bridge platforms
Cut-and-cover tunnels
Irrigation channels

PACKAGING
A : 20LT
B : 20LT

DESCRIPTION
CA-002W(12) is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement. After mixing grout with CA-002W(12) can increase water resistance and bonding strength.

AREA OF APPLICATIONS
* Repair Mortar for Concrete Areas
* Industrial Flooring
* Bonding Agent for New to Old Concrete
* As Cement Grout Additive
* Enhance adhesion strength of Mortar.

PACKING & STORAGE
20kg per plastic pail.
Please store in cool places and avoid direct sunlight.

DESCRIPTION
CC-103(2K) Crystalline Waterproofing Materials is a capillary waterproofing formulation. CC-103(2K) has high permeability which crystallize and penetrate deeply into the capillaries of the concrete.

ADVANTAGES
* Applied to wet surface
* Transparent, non-toxic and odorless
* High cohesion and effective against positive/negative water pressure well

APPLICATION
* The leakage of inner wall in basements or the protection against positive/negative water
pressure
* Prevent seepage and leakage in underground passages and tunnels
* Avoid the leakage of cisterns and pools

PACKING
30KG/Set
A: 22.5KG in powder.+ B: 7.5KG additive.

COLOR
Grey and white.

STORAGE
6 months in original container stored in dry conditions and under 25°C.

DESCRIPTION
CP-310 was synthesized from imported high-technology macromolecule resin and
specialized paint that is different from general acrylic resin. CP-310 is a perfect product to
provide a high water-tolerant, climate-tolerant, and anti-UV ability.

FEATURES
* Excellent environmental water-based waterproofing paint
* Water-based, Non-toxic, odorless, inflammable, and harmless
* Fine adhesion, extreme toughness, high elastic, and high endurance
* Hydrophilic, and may be applied on damp surface

USE
RoofBuilding, condominium, factory, barracks, school, garden and etc..
WallsBasement wall , exterior wall , and etcâ?¦
PREPARATION
1. (The following steps are recommended for best results)
2. New concrete must cure for a minimum of 30 days
3. All holes or cracks must be properly patched
4. All surfaces must be clean and free of dirt, dust, efflorescence and oil

APPLICATION
(The following steps are recommended for best results)
1. Stir well before use. Do not thin; however, if thinning is necessary, thin water at a
rate of no more than 10%
2. One prime required CP-310 primer
3. Two coats are required for the best resultskeep the thickness of each coating
below 1m.
4. Wait for each coating to be total dry before overlaying the next coat. The interval
time between each coating is minimum of 8 hours.

COVERAGE
5-gallons about 33m2

COLOR
Grayã??Whiteã??ivoryã??Green

DRY TIME
Dries to touch in about 1-2days . Low temperatures or high humidity conditions will affect
drying time. Full cure should be reached in 14-30 days.

CLEAN UP
1. Clean hands and tools with soap water.
2. After 30 days or paint has fully cured, areas may be wasted using a non-abrasive, mild
detergent and cellulose sponge.

WARNING
(Read the following carefully for your own safety)
1. Keep out of reach of children-Do not take internally.
2. May cause eye, skin and respiratory tract irritation. May be harmful if swallowed. Use
only with adequate ventilation.

DESCRIPTION
CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage.

ADVANTAGES
* Prevent the constructions aging phenomenon
* Avoid the leakage and mold on the wall
* Effective against negative water pressure
* With good stability
* Non-Toxic

APPLICATION
* Internal and external walls
* The leakage of inner wall in basements or the protection against negative water
pressure
* The construction of base isolated structures
* Reservoir; drinking water pool
* Contaminated water pool; water storage tank

PROCEDURE
1. Ensure all surfaces which CC-103(1K) will be applied are clear.
2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer.
3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply
evenly with a nap roller.
4. Use finishing trowel to smoothing after using spray machine.

PACKING
22.5KG per pail.

STORAGE
6 months in original container stored in dry conditions.

LIMITATION
The crystalline products need to be used between 4 °C ~ 32 °C when applied.

Code 82956: Protects acne from contaminants and absorbs secretion

Features
1. Waterproof, breathable, hypoallergenic.

2. Invisible, snug fit, contamination-free.

Size: 0.8 cm x 24 stickers + 1.2cm x 12 stickers
(clip included)
Material: PU, silicone gel

Code 86310: Cannula fixation and injection plaster. Non-woven adhesive dressing with absorbent pad

Features
1. Sterile and adhesive as required for firmly securing cannulas used for hypodermic injections.
2. Laid on a non-woven hypoallergenic backing to be fitted with a central pad which facilitates the introduction of the hypodermic needle.
3. Waterproof but air permeable-shielding out water, dirt and germs.

Color: White

Size: 6x8 cm

Code 89600: Adhesive transparent PU film for wound protection from water, dirt & germs

Features:
1. Transparent PU film, coated with hypoallergenic adhesive.

2. Strong adhesion yet easy to remove that leaves little or no residue.

3. Waterproof but air permeable, it shields out water,

Materialï¼? PU film

Size: 6 x 7 cm (2.4''x2.8'')
10 x 13 cm (4''x5.1'')

Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs

Features:
1. Transparent PU film, coated with hypoallergenic adhesive.

2. Strong adhesion yet easy to remove that leaves little or no residue.

3. Waterproof but air permeable, it shields out water

Material: PU

Shape: Round-cut or angle-cut

Size: 4 x 4 cm (1.6''x1.6'')
6 x 7 cm (2.4''x2.8'')
10 x 12 cm (4''x4.8'')

Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs

Features:
1. Transparent PU film, coated with hypoallergenic adhesive.

2. Strong adhesion yet easy to remove that leaves little or no residue.

3. Waterproof but air permeable, it shields out water

Material: PU

Shape: Round-cut or angle-cut

Size: 4 x 4 cm (1.6''x1.6'')
6 x 7 cm (2.4''x2.8'')
10 x 12 cm (4''x4.8'')

Code 85750: Anchor wound dressings on fragile or at-risk skin

Features
Anchors wound dressings on fragile or at-risk skin.

Secures tubing and devices.

Gentle yet secure, waterproof and snug fit.

Color: Flesh

Tear type: Easy-tear or normal

Size: 2.50 cm x 150 cm
5.00 cm x 150 cm

Code 82240: Eyepad for non-woven adhesive dressing with absorbent pad

Features
1. Non-woven fabric laminated with released paper.

2. An additional layer of non-woven and black film specifically designed for amblyopic vision treatment.

3. Hypoallergenic adhesive leave

Color: White, flesh

Size: 5 x 6 cm (kid)

5.8 x 8.3 cm (Adult)

Pad type: black/nonwoven pad
cotton pad

Code 82230: Non-woven adhesive dressing with absorbent pad

Features
1. Non-woven fabric laminated with released paper.

2. Designed for elbows and knees where bandages do not hold well.

3. Individually wrapped and gamma sterilized.

Color: White

Size: 8.5 x 12.5 cm (3.3''x5'')

10 x 16 cm (4''x6.3'')

Code 82220: Non-woven adhesive dressing with absorbent pad

Features
1. Non-woven fabric laminated with released paper.

2. Designed for thumbs,toes, finertips and finger joints where bandages do not hold well.

3. Individually wrapped and gamma sterilized.

Color: White

Size: 4.5 x 5 cm (1.8''x2'')

3.8 x 7.6 cm (1.5''x3'')

Code 82200: Non-woven adhesive dressing with absorbent pad

Features
1. Non-woven fabric laminated with released paper.

2. Hypoallergenic adhesive for sensitive skin.

3. Non-adherent film prevents absorbent pad from sticking to wound.

4. Porous and breathe

Color: White

Size: 4 x 6 cm (1.6''x2.5'')
10 x 15 cm (4''x6'')
6 x 7 cm (2.5''x2.8'')
8 x 10 cm (3''x4'')
10 x 20 cm (4''x8'')
10 x 25 cm (4''x10'')
10 x 30 cm (4''x12'')

Code 83200: Non-woven adhesive bandage and retention sheet.

Features
1. Non-woven fabric, and laminated with released paper.

2. Hypoallergenic adhesive leaves little or no residue.

3. Provides a strong adhesion, yet us easy to remove.

4. Porous and breathe

Color: White

Size: 5 cm x 9.14 m(2x10 yds)

10 cm x 9.14 m(4x10 yds)

15 cm x 9.14 m(6x10 yds)

20 cm x 9.14 m(8x10 yds)

30 cm x 9.14 m(12x10 yds)