The blowers are made by German ELMO Vacuum Technology GmbH, a Siemens company in year 2002 and they are single stage, gas ring type. The vacuum pumps are in good operational condition. We have three identical pump units and originally the pumps were in dust suction operation and therefore the delivery includes 3 pcs high efficiency cyclone type dust filter with electric discharge vibrators. Motor speed is controlled with individual inverters. Units can be sold separately.
ELMO-G vacuum pumps can be used for suction operation or as compressors in pneumatic transportation system. They have side-channel principle using gas ring as a sealing and the gas flows through the compressor along a helical trajectory and is repeatedly accelerated and thereby repeatedly compressed according to the required operating point. The blowers are oil-free and thus suitable for various applications. The blowersÆ have both suction and discharge noise silencer. For pump curves, both in suction and compression, as well as additional information please contact us.
Technical Data:
Manufacturer's type:ELMO 2BH1943-1GC36
Year of manufacture:2002
Suction capacity with max vacuum:16,7 m3/min (50Hz)
Suction capacity with max discharge pressure:21,5 m3/min (50Hz)
Max pressure difference in vacuum operation:0,30 bar (50 Hz)
Max pressure difference in compression operation:0,35 bar (50 Hz)
Inverter:Danfors VTL 6000 HVAC
Blower's rotation speed2920 rpm / 50 Hz and 3520 rpm / 60 Hz
Electric motor (Siemens):50 Hz: 21.0 kW û 300/690V û 39.5 / 23.0 A
60 Hz: 24.2 kW û 460 V û 41.0 A
Protection class:IP 54.
The fan is made by German Pollrich Ventilatoren GmbH in year 2004 and it has been as a back-up emergency fan which has practically newer used and therefore the unit is new like condition. This fan was designed to blow explosive air/gas mixture (VOC) and therefore it fulfills category II 2G, temperature class 1 ATEX 95 norm of explosive proof design. The motor and fan are built on a common heavy duty frame and they are connected with a flexible coupling.
Technical data:
Manufacturer: Pollrich Ventilatoren GmbH
Year of manufacture: 2004
Fan type: VR50S11C1UK0900LG360MMUU
Manufacturing no: 123665
Volume: 10.55 m3/sec (37980 m3/h)
Max press difference: 8000 Pa (0.08 Bar)
Speed: 2980 RPM
Max gas temperature: 80 C
Power requirement: 104.6 kW
Electric motor: CEMP 132 kW / 2970 RPM
Type: AC70 315M 2
Classifications: II 2 G EEXd IIC T4 IP 55.
R-Steel® Wire Loops and Boxes manufactured by R-Group Finland Oy are steel parts consisting of a high strength steel wire and a steel box. R-Steel® Wire Loop boxes are very easy to use on site, with proven no tool tear off tape that releases the flexible loops.
Our wire loop box range includes: Single wire loop boxes and Double wire loop boxes. Highly effeâ?¢cient product available for both precast and cast in situ structure. It is mainly used in the connection of slabs, walls and columns.
Quality control of the wire rope loops is done according to the requirements of the Finnish Code of Building Regulations and the instructions according to the quality and environment system of the R-Group Finland Oy (ISO9001 and ISO 14001). R-Group Finland Oy has a quality control contract with Inspecta Sertifiointi Oy.
The steel box and the wire rope are zinc coated. Zinced products are passivized with min. 1 month of storage.
R-Steel Loop is a flexible wire rope is bent to loop and held together by compression sleeve. R-Steel® Loop may be used e.g. to tie concrete wall elements to the building frame with ribbed steel bars installed through the wire rope loop.
The wire boxes have the advantage of ease of casting and protection of the loop, however the R-Steel® loops can be used in thinner panels and can also be used for lifting.
Single Wire Loop Boxes
For Single Boxes available standard wire lengths of 60 mm, 80 mm, 100 mm, 120 mm and 140 mm.
Double Wire Loop Boxes
Double Wire Loop Box offers unique solution for joining double walls to precast elements. Design resistances can be achieved in all directions.
Wire lenghts of 80 mm and 100 mm are available for double wire loop.
Thickness of the steel plate of the box is 0,7 mm, according to SFS-EN 12385.
Manufacturer pompetravaini italy, made in year 2002. Vacuum pump is two staged rotating pump with externally located, grease lubricated bearings. Pump is liquid ring type designed for water sealed operation. The impeller and shaft are made of stainless steel (aisi 316), cast iron casing and manifold normal steel. The shaft is sealed with double mechanical seal. Pump is provided with connections for service water and draining. Pump includes also anticavitation valve. Pump is dismantled from its base frame but the delivery includes original electric motor eex classified abb hyr 200m lb 4 30 kw, 1476 rpm, year 1995. The equipment will be supplied loose - not as a skid.
Technical data:trch 80 - 540/c2/ra
Max suction pressure:25 mbar (till 300mbar)
Max capacity:540 m3/h (min 400 m3/h)
Flanges:80 mm
Rotation speed:1500 rpm
Power requirement:30 kw at 1500 rpm
Year made:2002
Condition:fully operational
Quality Barley from Finland! Finnish barley has a good reputation in the market and we devote a great deal of effort to maintaining and improving this. High test weights, good germination and clean products are some of the reasons for this positive reputation.
Specification of Purchase:
Description : Native barleyfor food industry
Specific weight (kg/hl) : min 62 kg/hL.
Crude protein : min 2 %
Foreign species content : max 2%
Moisture : max 14%
Domestic : 100 % Finish
Potato starch is an ingredient in many food types! Our potato starch are used in products of multinational companies that are found in every household. Many people do not realise that our starches are essential ingredients in the products they consume daily.
Specification of Purchase
Description : Native potato starch for food industry
Appearance : White powder
Taste and smell : Neutral
Properties : Gluten-free, lactose-free, cholesterol-free, salt-free, no added sugar, does not contain genetically modified ingredients. Best before = Packing Date + 2 years.
Domestic : 100 % Finnish
Chemical content:
Moisture : 17,0 - 19.0%, (90 min 130 deg. C)
pH : 6 -8
Ash : max 0.3%, (KE002)
Protein : max. 0.15%, KE005)
Filter gauge : < 0.2%, 0.5 mm
Purity : Min. 95 %, Starch in DS
Carbohydrates : 81,2 g / 100 g
Microbiological content:
Bacteria, total : max. 10 000 per g, (NMKL 86/2006)
Coliforms, +44 deg.C : 0 per g, (NMKL / Petrofilm)
Coliforms, +37, aC : < 10 per g, (NMKL 44/1995)
Yeast and mould : max. 50 per g, (NMKL 98/2005)
Bacillus Cereus : < 100 per g, (NMKL 67:2003)
Clostridium Perfringens : < 10 per g, (NMKL 95:2006)
Escherichia Coli : < 10 per g : (NMKL 125:2005)
Staphylococcus Aureus : < 100 per g, (NMKL 66:2003)
Listeria : negative : (ISO 11290-1:97/A1:04)
Salmonella : negative : (NMKL 187:2007)
