Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -
TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.
TECHNOL HYBRID 5W-30 is a fully synthetic engine oil specifically formulated for use in hybrid vehicles. This engine oil delivers outstanding fuel economy and performance under most demanding operating conditions, thanks to its high quality base oils and additives. It possesses anticorrosion, antioxidant, and antifoaming properties and contains detergents and dispersants that keep the engine clean and preserve its power. Its very stable viscosity index ensures excellent lubrication of the moving components of the engine and protects it against wear and tear at low and high temperatures all year round.
Meets the requirements of:
BMW LL-04
GM DEXOS 2
RN0700/0710
MB 229.51/31/226.5
Specifications:
API SN/CF
ACEA C2/C3
TECHNOL PLATINUM 5W-30 is a new generation of Low SAPS (low content in Sulphated Ash, Phosphorus, and Sulphur) engine oil specifically formulated to meet the technical requirements of gasoline and diesel engines of new vehicle models. Its Low SAPS technology makes it the lubricant of choice for optimal operation of engines of the latest generation, equipped with anti-pollutant devices. This engine oil ensures the optimal functioning of three-way catalytic converters and particulate filters and compliance with performance levels declared by vehicle manufacturers, and Euro V environmental standards. Its excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance under all circumstances.
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum -
TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.
Characteristics
Density at 15C kgm3 1075
Boiling temperature C 190
Pour Point 50 diluted 40
pH 86
Packaging
1 L plastic container 12 units case
5 L plastic container 4 units case
200 L drum
TECHNOL 4 SEASONS ANTIFREEZE COOLANT RED G12 is Monoethylene Glycolbased antifreeze coolant of red color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines of modern vehicles It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts prevents foam formation and ensures heat transfer It does not contain amines nitrites or phosphates It must not be mixed with different colors or types of antifreeze coolant
30 Temperature Scanners Suppliers
Short on time? Let Temperature Scanners sellers contact you.
Characteristics
Density at 15C kgm3 1075
Boiling temperature C 190
Pour Point 50 diluted 40
pH 86
Packaging
1 L plastic container 12 units case
5 L plastic container 4 units case
200 L drum
TECHNOL 4 SEASONS ANTIFREEZE COOLANT BLUE G11 is Monoethylene Glycolbased antifreeze coolant of blue color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant
Characteristics
Density at 15C kgm3 1075
Boiling temperature C 190
Pour Point 50 diluted 40
pH 86
Packaging
1 L plastic container 12 units case
5 L plastic container 4 units case
200 L drum
TECHNOL 4 SEASONS ANTIFREEZE COOLANT GREEN G11 is Monoethylene Glycolbased antifreeze coolant of green color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant
Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -
TECHNOL SOLIDOL is a water-resistant multipurpose calcium grease made of high quality mineral base oils and a calcium soap thickener. This grease is used in a wide range of applications, including lubrication of chassis, rolling and sliding friction units of various machines, and mechanisms operating under medium load and speed conditions. Thanks to its antioxidant, anticorrosion and antirust properties, this grease ensures protection against oxidation, corrosion and rust, extending the service life of the lubricated components. It provides excellent water resistance and possesses high mechanical stability. It is recommended for use in the temperature range from -25 C to 65 C.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
Zinc Ash - Zn min. 62%
Packing: 1MT Jumbo bags or loose into container
Inspection: 3rd party at loading (SGS/ CCIC)
Quick details:
Place of origin: baku, azerbaijan
Material: hdpe
Thickness: 2.7-12.5 mm
Item: three-layer fiber glass pprc
Rating: ip65
Certification: iso9001
Color: white
Standard: ohsas 18001
Specification: as your requirement
Od: 16-75 mm
Length: as your requirement
Packaging & delivery:
Depends on your order.
Description:
Pipes made of “random polypropylene” are widely used in modern life. Being light and very durable, this thermoplastic is resistant to solvents, acids and alkali. Pipes made of this material are used at temperatures from -40°? to +95°?. Elasticity of pipe prevents crack formation, when water is frozen inside. We use high quality polypropylene from known manufacturers, such as sabic etc.In the production of fiber pipes.These pipes are produced in the equipments of well-known german companies. We offer to our customers high quality pipes with reasonable prices.
Advantages of pipes:
• Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards.
• Reliability: systems assembled from these pipes have high temperature and pressure resistance.
• Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature.
• Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant.
• Flow rate: due to the smooth inner surface these pipes has increased flow rates
• Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
• Durability: middle layer of high temperature linear expansion of fiberglass prevents pipe bending and significantly increases pressure resistance.
Quick details:
Place of origin: baku, azerbaijan
Material: hdpe
Thickness: 1.9-15 mm
Item: polypropylene ppr pipesprotection rating: ip65
Certification: iso9001
Color: white
Standard: ohsas 18001
Specification: as your requirement
Od: 20-90.0 mm
Type: pn-10, 16, 20
Length: as your requirement
Packaging & delivery:
Depends on your order.
Description:
Advantages of pipes:
• Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards.
• Reliability: systems assembled from these pipes have high temperature and pressure resistance.
• Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature.
• Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant.
• Flow rate: due to the smooth inner surface these pipes has increased flow rates
• Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
Coolant - antifreeze KL-A40M" intend for using in cooling system of petrol engine and diesel engine internalcombustion engine of all types vehicle. It is preserve necessary for operating envelope of temperature from 400C to + 1100C. Coolant - KL-A40M characterized by high performance attributes and represents optimal composition first-class monoetylenglikol highpurity, demineralized water and by unique complex anti-foam additives and additives-inhibitors, which averted rust formation and metal corrosion (copper, steel, aluminium, cast iron, brass, solder). High-efficient additives antifreeze parcel KL-A40M provides cooling system protection from incrustation, corrosion, heightened depreciation, cavitation, prevent from rubber swelling. Product not carries phosphates, amines, nitrites.
Due to its special thermal treatment, tempered glass boasts higher impact strength and freeze-thaw resistance compared to regular glass. All tempered glasses are subject to mandatory edge pre-treatment. If broken, such glass falls apart to small fragments with uncut edges.
The glass tempering has the following effects::
impact strength rises 5-10 fold
flexing strength rises 2-3 fold
operating temperature range increases to -150 to +300°C
The tempered glass has quite a broad range of applications: glass panes, multilayer glasses with different properties, all-glass partitions, staircases, stairs, hand rails, car windows etc. The tempered glass can withstand hard blows perpendicular to its plane. Despite its improved properties, however, tempered glass is still a fragile material. It is especially susceptible to end loads, so such glass should be installed with extreme care.
Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: Depends on your requirement
Model Number: HDPE
Thickness: Depends on your requirement
Color: Black,White
Material: PE
Standard: OHSAS 18 001
Types: Elbows 45,90 dgr., Tee T-Joints 90 dgr., Tee Reducing T-Joints 90 dgr., Pipe Caps, Reducing couplings, Flange Adaptor.
Packaging & delivery:
Depends on your order.
Description:
Cast fittings - pipe fittings are manufactured by molding of polyethylene (PE100) under pressure and temperature. Cast fittings are used in cases when you want to change the direction of tubing, tee off, or switch to a different diameter. A significant advantage of cast fittings is their relatively low cost associated with the ease of manufacture. Installation is carried out by butt welding, which reduces the financial costs because practically no consumables required at the same time relatively simple installation. Elbows, flange bushings, reducers, tees and caps, are used in gas and water pipes made of PE100 from 63 to 315 mm.
Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: Depends on your requirement
Model Number: HDPE
Thickness: Depends on your requirement
Color: Black
Material: PE
Standard: OHSAS 18 001
Types: Elbows 30-45-60-90 dgr.,T-Joints 90 dgr.,Cross T,Y Pieces 45-60 dgr.
Packaging & delivery:
Depends on your order.
Description:
PE 100 brand welded polyethylene fittings are adaptor fittings for PE100 high-density polyethylene pipes. These fittings are manufactured by connecting pipe sections by welding. Released PE 100 brand welded polyethylene fittings have the following configurations and types: 15°, 30°, 45°, 60° and 90°. These fittings are designed for pipe connections at the areas, where pipeline directions (turns and branches) and diameter change.
PE 100 brand welded polyethylene fittings are connected to pipes by exactly lining-up and welding ends with the help of a special welding set.
PE 100 brand welded polyethylene fittings have increased chemical resistance, temperature changes and deformations. These fittings are not subjected to oxidation, and do not decompose for a long time. Operating life of these PE 100 brand welded polyethylene fittings is 50 years which ensures long-term, continuous use of your pipes.
Quick details:
Place of origin: Baku,Azerbaijan
Material: HDPE
Thickness: 1.25-7.5mm
Item: Single-Layer Corrugated Pipes
Protection Rating: IP65
Structure: Bellows inside and outside
Certification: ISO9001
Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow
Standard: OHSAS 18001
Specification: AD7.0MM-AD106.0MM
OD: 7.0-106.0mm
Length: As your requirement
Type: Flexible and Durable
Packaging & delivery:
Depends on your order.
Description:
Our polymeric product factory produces new type of single-layer corrugated polyethylene pipes with hard surface and light weight. These pipes ensure safety of power and telecommunication lines.
Single layer corrugated pipes outside have a profile in forms of corrugations. Their inside is tubular hollow channels. The corrugated surface to withstand heavy loads. Single layer corrugated pipes varies with their wall thickness and diametres. The more is the thickness, more durable the pipes are. Higher thickness ones used for installation of pipes under the pouring of concrete, cement screed, or under the ground. Single layer corrugated pipes light series are used in all other cases or during outer installations. Our single layer corrugated pipes are made from HDPE material.
Advantages and properties:
- They do not rot and corrosion;
- Resistant to chemicals;
- Resistant to external loads and shock resistance;
- Waterproof and resistant to moisture;
- Non-conductive, so they eliminate the risk of electric shock if cable damaged;
- They provide protection against mechanical damage;
- Long life of at least 50 years;
- They retain their characteristics and properties during the entire lifetime;
- They have a wide operating temperature range;
- They can be laid open and a closed manner;
- These types of cables are flexible and do not need additional coupling fittings;
- These types of cables equipped with broaching, which simplifies and accelerates the installation of wires and cables;
- For the installation they do not require special skills and special equipment;
- They are lightweight, easy to carry, for loading/unloading, handling and storage;
have a low cost;
- They have environmentally friendly and safe material.
Material HDPE
Application Areas:
1.Protection of high and low-voltage conductors from mechanical impacts
2.Protects environment from aggressive impacts when cabling under ground
3.Concealed mounting inside of concrete and installation
4.Sewage, ground and storm water disposal
Working temperature: From -40ºC till+90ºC
Color: Outer wall: red (electricity), blue (telecommunication), black (others).
Inner wall: white, yellow
Pipe wall color can be changed with the consent of consumer.
Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
a rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
An oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.
General Specifications:
Installed power of the lines: 14 kW
Rolling speed: from 8 to 12 lin m/min
Accuracy of rolling along the length: ± 2 mm per 6 m
Quantity of reduction mills: from 14 to 17 pieces
Lifting capacity of the uncoiling machine: 7 tons (10 tons)
Attendants: 1 person
Maximum overall dimensions of the used roll:
Width: 1,250 mm;
Outer diameter: 1,600 mm;
Inside diameter: 500…600 mm.
Receiving stacker length: 6 m
Space required to accommodate the manufacture of tile effect roofing (LxWxH): 30,000×10,000×4,000 mm.
Working temperature range for equipment operation: from +2 to +40 o
30 Temperature Scanners Suppliers
Short on time? Let Temperature Scanners sellers contact you.
