This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Please quote for the following wholesale product requirement -
Product : 1MT Jumbo Bags (FIBC)
Specifications:
for Bentonite
Polypropylene bulk bags of 1.0 ton, which should comply with BS EN ISO 21898:2005 and having the with following specifications:
1. Outer bag: Heavy Duty Polypropylene Fabric, 240 g/m, UV stabilized, Polyethylene liner or lamination, which fits into FIBC. Liner thickness should be a 6 mil LLD Polyethylene stitched all the way.
2. Safe Working Load (SWL) 1.5MT
3. Safety Factor: 6:1(both for Offshore and onshore).¨
4. Bag Type:
a. Standard duty reusable for offshore requirement
b. Single trip for onshore requirement.
5. Lifting Loops: Cross corner lifting straps which are stitched all the way around the bag, Color contrasting from the bag's fabric color.¨
6. Filling and discharge: Jumbo bag should have top & bottom spouts for filling and discharge, cord tied, the inner bag to be attached to the top of the outer bag.
7. UV Protection: The bags should be UV treated to the minimum level of 200 Kly. The residual tensile. Strength of the bulk bag should at least be 50% after 12 months.
8. The Bags should have permanently attached label with the following information¨
Manufacturer & Supplier names/address¨
FIBC Class¨
Date of Manufacture¨
Maximum Stacking Height¨
Special treatment¨
Safety Factor
9. Size 95cm x 95cm x 120cm
Quantity: 1 full container
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Jebel Ali Port, United Arab Emirates
