This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Buyer From
Dubai,
Dubai Industrial City,
United Arab Emirates
Quantity Required:
150 - 300
Metric Tons
Payment Terms:
LC
Destination:
United Arab Emirates
Looking for suppliers from:
China, Iran, Russian Federation, Asia, Africa
Product Description
The buyer would like to receive quotations for -
Product : Steel Wire Rod 1008G 5.5mm
Specifications:
(Grade SAE 1006/1008G) with a diameter of 5.5mm, intended for the manufacturing of common wire nails.
(Grade SAE 1006/1008G) with a diameter of 5.5mm, intended for the manufacturing of common wire nails.
Mill Test Certificate (MTC)
Compliance with relevant ASTM/JIS/EN standards, if any
Quantity: 150 to 300 MT per month]
Specifications:
1- GRADE: ASTM SAE class 1059/1060 or JIS 3506 SWRH 62b
DIMENSIONS: diameter 5.5 mm and 6.5 mm
APPLICATIONS: For the manufacture of steel wire ropes.
2-GRADE: ASTM SAE class 1069/1070 or JIS 3506 SWRH 72b
DIMENSIONS: diameter 8 mm, 9.5 mm, 11 mm.
APPLICATIONS: For making wires for PC
3- GRADE: Diameter ASTM SAE 1078/1080 or JIS 3506 SWRH 77b
DIMENSIONS: 8 mm, 9.5 mm, 11 mm, 14 mm.
APPLICATIONS: For making wires for PC
4- GRADE: ASTM SAE class 1084/1085 or JIS 3506 SWRH 82b
DIMENSIONS: diameter 8mm, 9mm, 11mm, 12mm, 13mm, 14mm 16mm.
APPLICATIONS: For making wires for PC
Specifications :
Rolled Non-alloy Steel Wire For Cold Drawing C70d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 200 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): C: 0.68 - 0.72 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer. 2. Rolled Non-alloy Steel Wire For Cold Drawing C42d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 50 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): - C: 0.40 - 0.44 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer
