The buyer would like to receive quotations for -
Product Name: Pond Water Circulation Pumps And Vacuum Pumps
Specifications :
Pond Water Circulation Pumps And Vacuum Pumps
The Basins Are Constructed According To Code 937 And Operate On Site Electricity General (circulation And Drain Pumps) Ip 54 And Price Includes The Following
All Necessary Parts For Connecting The Pump To The Water Network Separation Valves And Valves Before And After The Pump And The Necessary Flanges And The Returns After The Pump And Inside The Water Intake Source And Filters And Flexible Connections, Pipes And Other Parts Necessary For Operations Installation.
Dry Run Low Level And Control Pressure Switches
Electric Supply To The Pump And From The Nearest Electrical Source Only What Is On The Electrical Diagrams.
Appropriate Concrete Bases And Appropriate Vibration Isolation Bases Inertia Base
Operation And Control Panel For Piston Pumps Operation, Extinguishing, Contactors, Overloads, And Signal Bulbs With All The Necessary Electrical Extensions Such As Wires, Pipes And Cans For Connection From The Operation Panel To The Pumps :
Pump Capacity 5.4l/sec, 70m Pressure (cp-l1-01) (three Working And One Spare) Number =4
Pumps With A Capacity Of 4.15 Liters Per Second, 46 Meters Of Pressure (cwp-l1-01) (two Working And One Spare) Number= 3.
And Another Type Of Pump If It Available For You Please Provide Us With Price
Submersible Pump For Pumping Water From Manholes (sewage Pump)
Construction Of Stator And Housing: Heavy Duty Cast Iron With Epoxy Paint.
Shaft: Stainless Steel.
Screws And Bolts: Steel.
50 Hz. – Single Phase.
Horizontal Outlet.
Operation Temperature From Oc – 40c.
Electrical Float Switch.
Electrical Power Cable (5)m Length One Piece Water
Proof. And High Quality Insulation.
Heavy Duty Ball Bearing And Permanently Lubricated
For Long Operating Life.
Brass Or Cast Iron Isolating Valve.
Suitable Hook Or Eye Bolt As Specified From The
Manufacture With Stainless Steel Lifting Cable, With A
Shackle.
Elbows And Flanges Shall Be Form Cast Iron.
All The Caskets Needed As Specified From The
Manufacture.
Easily-removed And Serviced Motor.
Oil Filled Or Air Filled Motors
Supplied With Thermal Protection.
Low Velocity (rpm) Is Preferable.
Hdpe Piping To Nearest Sub Lake As Per Drawing
2.0L/sec pump capacity, 12m pressure (SMP-1) number = 2
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : South Korea (Republi, Philippines
Contact : Eng. Aya
