Please quote for the following wholesale product requirement -
Product: EN590 10 PPM Diesel
Specifications:
Ultra low sulfur diesel
Qty: 300,000 - 2,000,000 mt
BUYERS PROCEDURE:
The buyer issues an ICPO without a TSA. The seller then issues a Commercial Invoice and draft SPA. Once the CI is signed, the seller provides full proof of product, including documents such as the SGS report, CPA, etc. After receiving these, the buyer issues an Authorization to Verify (ATV) for logistics confirmation. Following a successful verification and dip test, payment is made via MT103/TT or another agreed method. Title is transferred at this stage, and the product is lifted as per the contract.
Please provide a quotation to the following requirement from importer -
Product Name: Low Density Polyethylene (LDPE)
Specifications :
DPE MP3425 Complies With The Requirements As Below Indicated When The Product Is Processed Using The Correct Practice And Testing Procedures
Properties
Unit
Test Method
Typical Value
Density ( Compound ) At 23ºc
G/cm3
ASTM D 792
0.934
Melt Flow rate 2,16 kg al 190ºC
g/10min
ASTM D 1238
0.25
Melt Flow rate 5kg at 190ºC
g/10min
ASTM D 1238
1.0
Carbon Black Content
%
ASTM D 1603
Greater Than 2
Vicat Softening Point
ºC
ASTM D 1525
98
Melting point
ºC
ASTM D 2117
124
Brittleness Temperature
ºC
ASTM D 746
Less Than -70
Tensile strain at break
%
ASTM D 638
22
Tensile elongation
%
ASTM D 638
Greater Than 600
Hardness
Shore D
ASTM D 2240
50
E.S.C.R. 10% igepal F50
Hr
ASTM D 1693-A
Greater Than 5000
Oxidation Induction Time 210 ºC
Min
ISO 11357
Greater Than 20
Payment Terms:
To be discussed with suppliers, please mention your standard payment terms
Destination:
Not Specified
Looking for suppliers from:
Worldwide
Product Description
Please quote for the following wholesale product requirement -
Product : Plastic Polyethylene Film
Specifications:
• Commodity: Plastic Polyethylene Film (Post-Industrial/Post-Consumer, Clear/Natural Preferred)
• Form: Compressed Bales
• Condition: Clean, Non-Hazardous, Free from PVC or other contaminants
• Origin: Preferably Canada
______________
2. Quantity Requirement:
• Initial Trial Order: 1 x 40' HC container
• Estimated Monthly Volume (if quality is approved): Up to 10 x 40' HC containers
Packaging Terms : in bales
Quantity Required : 1 Forty-Foot Container
Shipping Terms : FOB
Payment Terms : To be discussed with suppliers, please mention your standard payment terms
