Please quote for the following wholesale product requirement -
Product : Liposuction Machine
Specifications:
- 3-in-1 Electric Liposuction Machine Safe & Efficient Fat Removal with Infusion Vibration & Aspiration Surgical Instrument Basis
The Velp make
1 unit
Looking for suppliers from:
Hungary, Romania, Bulgaria, Poland, Germany, Europe
Product Description
Please quote for the following wholesale product requirement -
Product Name: Welding Masks
Specifications:
Medical Mask
Brands : Nitrile Vinyl And Latex
Note :- Looking Suppliers Only From European Countries Like :- Hungary, Bulgeria, Poland, Germany, Romania.
Quantity Required : MOQ
Shipping Terms : DDP
Destination Port : Constanta, Romania
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Hungary, Romania, Bulgaria, Poland, Germany, Europ
Payment Terms:
full irrevocable confirmed l/c at sight
Destination:
Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Name: Ductile Iron Pipe
Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH
DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings
pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : full irrevocable confirmed l/c at sight
Specifications :
2 Panels Of 4 Square Meter 200–240 L 5.4 L 225 Litres
Need Price Jasai New Mumbai
Technical Specification
Absorber Sheet Copper 32 Swg/0.19 Mm Thick Selectively Coated Laser Welded Nickel-chrome Coated (e.t.p. Quality)
Riser Tube Copper 12.5mm 24 Swg (+ 0.5 Mm)
Header Tube Copper 25 Mm 22 Seg (+ 0.5 Mm)
No. of Riser Tube 9 Fins
Bonding Between Riser & Absorber high Temperature Ultrasonic Seam/laser Welding
Absorber Coating selective Coating Absorbity 0.95+ 0.02 Emmissivity = 0.10 +0.02
Front Glazing Toughen Glass 4 Mm Thickness Transparency 95% And Above
Back Insulation 50mm Thick Rock Wool Slab Density Of 48 Kg/m3 With Aluminum Foil
Gasket Epdm Rubber Grommets And Glass Beeding
Collector Box Jindal/jcw Ms Sheet, Extruded Channel Backed By A Sheet Of 22 Swg
Header Inlet & Outlet Jacket Brass Flanges 62 Mm Dia
Collector Stands And Legs m.s. “l” Angle With Enamel Coated
Support Top Glazing Glass Retaining Aluminum Beeding 1.6 Mm
Collector Box Welding tig Welding
Insulation Rock Wool/puf
Fosterers S.s.screws And Bolt Nuts
Collector Sealant silicon Base
Hot Water Storage Tank Stainless Steel 304 Grade (food Grade) Plasma Tig
Welded Tank /cr With Coating /copper Tank
Insulation 150mm Rock Wool (compressed 100mm) 48 Kg/m3 Density (or)puf Insulation
Outer Cladding Powder Coated Optional Ss 302 Stainless Steel
Screws And Fasteners Stainless Steel
Pipes And Fittings For Internal Ss Fittings “b” Class, Is Standard
Pipes And Fittings For External Ss Fittings “b” Class, Is Standard
Temperature Gauge Nil
Electrical Backup as Per The Electrical Power Sanctioned, Each 200 Lpd 2kwh Given. (optional)
Supporting Structural Stand Ms Channels/angles Of Suitable Size With Enamel Coated
