Buyer is interested to receive quotations for the following RFQ -
Product Name: Backyard Wind Turbine
Specifications:
• Power output: Minimum 1 kW
• Rotor diameter: 2.5 meters
• Material: Corrosion-resistant materials
• Noise level: Below 40dB
• Wind speed range: Operates at wind speeds between 2.5 m/s and 25 m/s
• Installation: Includes easy-to-follow installation manual
• Warranty: Minimum 2 years
• Height: Maximum 12 meters
• Safety features: Automatic braking system in high winds
• Certification: CE or equivalent certification
Service Requirements:
• Technical support for installation and maintenance
Looking forward to your quotations.
as per moq
Please quote for the following wholesale product requirement -
Product Name: Gas Turbine Generators
Specifications:
for Oil Field Gas Field
50 Hz , 2 mw
Application Type:Combined Heat and Power
Site Elevation:320 m
Site Ambient Temperature:Low:-15 / High:+50
Humidity:%20-30
Expected Operating scenario:150 hours/week
Electrical Load:Min 500Kw Max:2000Kw
60 Hz,Base Load
Fuel Type:Natural Gaz,Natural Gaz Pressure:0.4mmBTU
Required electrical voltage connection to utility :10.5 Kw
This unit will be synchronized with other power generation units
Power for turbine start up is not available ,we need start unit
No Need Steam
System Will be connected to Utility
Equipment Only,Outdoor
Plant Classification: Electrical Class
Please quote for the following wholesale product requirement -
Product : Wind Turbine
Specifications:
pure wind-to-grid tie inverter solution without solar input.
conditions: Input Source: Wind turbine (AC output). If your inverter needs DC input, we will use an external rectifier.Output: Grid-tie combination AC (single or three-phase)Function: The inverter should convert energy generated by the wind turbine and inject it direct into the utility grid.
-Capacity needed: 5 kW and 10 kW modelsNo solar input needed (This is not a hybrid system - only wind grid connection is needed)Also, please let us know:If the inverter includes MPPT for wind or built-in rectifieration Communication interface (RS485 /Ethernet/WiFi)Lead time,
Please quote for the following wholesale product requirement -
Product Name : Gas Turbine Spare Parts
Specifications:
1 Solenoid valves NG10 Complete with Base Plate TCT432902R0009B M BX36AA026-29 EA 1
2 Flame Scanner Complete, Short HTCT104783R0013 MBM31CR001 EA 1
3 Safety Relay Unit, complete HTCT013311 R0001 MBX69AA010 EA 2
4 PILOT VALVE HTCT313633 R0001 MBN_Fuel Distribution System EA 3
5 PILOT VALVE HTCT305851R0001 MBN_Fuel Distribution System EA 3
6 COMPRESSED AIR REGULATOR WILKERSON R26-04-GH0 0-17 Bar 1/2" HTCT417329P0013 MBX36DP005 EA 2
7 Double Thermocouple for Ignition Torch HTCT444758P3030 MBM31CT001,2 EA 2
8 FILTER CARTRIDGE HTCT311665P0002 MBX36,69AT001 EA 8
9 MEASUREMENT LINE HTCT 408646R0002 MB EA 2
10 High Pressure Pipe HTCT005152R0001 MBD10_TURBINE-END BEARING EA 2
11 Flame Scanner Bolts HTMA200312P0008 MBM31CR001 EA 24
12 HEXAGON SOCKET HEAD SCREW M12-TX75 HTCT201936P0009 MBM31AV213 EA 24
13 Foil vent valve steal O-Ring HTCT417838P0046 MBN_Fuel Distribution System EA 6
14 Measuring Line Coupling GMD0951561 P0002 MBD11CP001 EA 4
15 SCREWED PIPE CONNECTION 9ANA370103R0204 MBH33CP010, 11 EA 4
16 HEXAGONAL HEAD SCREW PLUG NB 314215P0302 MBH33CP010,11 EA 4
17 LEAD THROUGH PIECE HTCT305702P0001 MBH33CP010,11 EA 4
18 END PIECE HTCT431805P0001 MBH34CP001,2,3,4 EA 4
19 PLUG HTCT 410919R0003 BLOW OFF VALVES EA 3
20 BRANCH SOCKET HTCT410919R0004 BLOW OFF VALVES EA 3
Please provide a quotation to the following requirement from importer -
Product Name: Turbine Fuel Jet A-1
Quantity Required : 1.000.000 bbls
Procedure:
1. The Buyer Issue ICPO with his International Passport Number to the Seller.
2. The Seller issues Commercial Invoice (CI) for the available quantity in the Sellers
Storage Tank to the Buyer. The Buyer signs and return the CI to the Seller with their/
or assigned, signed Tank Storage Agreement (TSA) for the Sellers Verification and
Approval
3. The Seller issues the Partial POP documents as below and sends to the Buyer.
A. Fresh SGS (Not Older Than 48 Hours)
B. Injection Report (IR)
C. Authorization To Verify (ATV)
D. Authorization To Sell And Collect (ATSC)
E. Tank Storage Receipt (TSR)
F. Unconditional Dip Test Authorization (UDTA)
4. The Buyer conducts Dip Test and Take over Sellers tanks (IF REQUIRED). Buyer
provides Tank Details to the Seller to commence injection of product into the Buyers
Tank.
5. Within Twenty-Four (24) hours, Buyer issues 100% MT103 TT wire transfer
paymentto the Seller. The Seller transfers the title ownership to the Buyer.
6. The Seller Pays Commissions to Seller Side And Buyer Pays Buyer Side.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Turbine Fuel Jet A-1
Specifications:
Quantity Required : 1.000.000 bbls
Procedure:
1. The Buyer Issue ICPO with his International Passport Number to the Seller.
2. The Seller issues Commercial Invoice (CI) for the available quantity in the Sellers
Storage Tank to the Buyer. The Buyer signs and return the CI to the Seller with their/
or assigned, signed Tank Storage Agreement (TSA) for the Sellers Verification and
Approval
3. The Seller issues the Partial POP documents as below and sends to the Buyer.
A. Fresh SGS (Not Older Than 48 Hours)
B. Injection Report (IR)
C. Authorization To Verify (ATV)
D. Authorization To Sell And Collect (ATSC)
E. Tank Storage Receipt (TSR)
F. Unconditional Dip Test Authorization (UDTA)
4. The Buyer conducts Dip Test and Take over Sellers tanks (IF REQUIRED). Buyer
provides Tank Details to the Seller to commence injection of product into the Buyers
Tank.
5. Within Twenty-Four (24) hours, Buyer issues 100% MT103 TT wire transfer
paymentto the Seller. The Seller transfers the title ownership to the Buyer.
6. The Seller Pays Commissions to Seller Side And Buyer Pays Buyer Side.
