Please provide a quotation to the following requirement from importer -
Product Name: Kenaf Pulp Board
Specifications:
Item: Kenaf Pulp board
4. Quantity: Weight: 1M X1M=640g
(at least 4~6 layers of lamination.
You need to tell me the total width of the roll.
Required sample quantity: About 5–10 kg
Order plan of more than 50,000 tons per month after quality test)
Important Requirements:
* We must inspect your factory and sample test.
* Sample test (A4 size X 50 pcs)
* Product Ingredient chart
* Sample delivery address:
Address: Dogokdong Nambusunhwanro 2615, Seoul, Korea (Dogokdong StarClass 1304ho)
Zip code: 06267
Personal Customs Code(PCC) : P180026685984
Quantity Required : 50000 Ton/Tons
Shipping Terms : CIF
Destination Port : South Korea (Republic Of Korea)
Please quote for the following wholesale product requirement -
Product Name: Blockboards
Specifications:
3 layer panel product.
[material and dimensions]
The front and rear outer layers need to be 5mm thick solid cherry(American cherry), and the core is 9-12mm thick plywood(made in low hardness wood like poplar or spruce). So, the total thickness of the panel would be 19 - 22mm. For the width and length, they are 1220*1220mm.
We want both the front and rear cherry layers to be;
[cherry board grade]
- a premium grade with no knots or other imperfections
- straight grains most preferred, and curly grains to be avoided.
- surface to be sanded smooth.
[cherry board size and orientation]
- wide cherry boards to be used to have the minimum glue lines(8 cherry boards at most on each side of the panel, and fewer than 8 would be great).
- continous stave(no cherry boards are joined lengthwise)
- cherry boards are oriented in the same direction between the front and the rear of the panel.
[glue for cherry boards]
- polyurethane glue preferred, D4. If you have a better alternative, please advise. The dried glue needs to be less hard than the surrounding cherry wood.
- Please note that in our use of the panel, it can be in contact with water often, for hours each time.
- Surfaces to be glued need to be fully covered with glue, without missing any part resulting in dry joint, so that water does not penetrate in such a dry joint and split the joint.
- light tight between adjoining boards when glue is not applied yet(You cannot see light come through from the opposite side, meaning all board edges are very straight. Once the boards are glue joined, the glue line is almost invisible.)
Quantity : 20 foot container load for the initial purchase
Looking for suppliers from:
Russian Federation, South America
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product Name : Veneer Core
Specifications : Species : Eucalyptus or any hardwood having density about 650 kg/cbm. Preferably reddish or pinkish in color Size : 2.50 x 1.25mt or 1.85 x 1.25 or 1.25 x 1.25 Thickness ; 2.8, 2.2 & 1.7mm
Quantity ; Monthly 10 container ( 40 feet ). Moisture machine dried 12 - 14 % Grade : 90 % A grade 10 % AB grade A grade
Quantity Required : 10 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : India
Payment Terms : Bank Transfer
Looking for suppliers from : South America, Russian Federation
Please provide a quotation to the following requirement from importer -
Product: Raw MDF
Specifications:
1) no darkness on product for RAW MDF which is as display of down of decors
2) no bad smells
3) density will as standard 750 to up
4) not accepted flexible sheets or type even 0%
11.3mm 10000 sheets
17.2mm white both side 15000 sheets
17.2mm bother side color 35000
8mm raw plain 15000 sheets
8mm raw green 5000 sheets
4.5mm raw 10000 sheets
3mm decor 1 face color and white as per 17.2mm color madf 100000 sheets
