Looking for suppliers from:
Portugal, Germany, Iran, Australia, Canada
Product Description
The buyer would like to receive quotations for -
Product: Treated Mosquito Nets
Specifications:
Mosquito Net, Polyethylene
Material: (composition ISO1833) Polyethylene (PE) 100%
Fabrication: (construction ISO 8388) Warp knitted
Size: 180 x 160 x 150 cm
Denier: (ISO 2060, DUPRO) 100 - 150
Filament: Mono-filament
Netting mesh size: Min. 56 holes / inch2
Weight: Min. 38 g/m2, depending of denier
Shrinkage: (ISO 5077/ISO 6330 - 8A at 30 C, flat dry) +/- 5%
Bursting strength: (ISO13938-1 or ISO 13938-2): Min. 250 kPa for
net material and seams.
Fire safety: (16 CFR part 1610 ): Class 1
Color: Preferably white, blue or green
Treatment: Long lasting insecticide (3 to 5 years)
Insecticide: WHOPES recommended
Concentration of insecticide: WHOPES recommended
Target level of concentration: WHOPES recommended
Mosquito Net, POLYESTER
Material: (composition ISO1833) Polyester (PES) 100%
Fabrication: (construction ISO 8388) Warp knitted
Size: 180 x 160 x 150 cm
Denier: (ISO 2060, DUPRO) 75 - 100
Filament: Multi-filament 36 or higher
Netting mesh size: Min. 25 holes/cm2 (156 holes/inch2)
Weight: (ISO 3801) 30 or 40 gr/m2 depending of denier
Shrinkage: (ISO 5077/ISO 6330 - 8A at 30 C, flat dry) +/- 5%
Bursting strength: (ISO13938) 250 kPa minimum
Fire safety: (16 CFR part 1610 ): Class 1
Color: Preferably white, blue or green
Treatment: Long lasting insecticide (3 to 5 years)
Insecticide: WHOPES recommended
Concentration of insecticide: WHOPES recommended
Target level of concentration: WHOPES recommended
Qty: 900,000 pcs
Suppliers from Poland, Germany, Iran, Australia and Canada
Quantity Required : 900000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Mombsasa Port, Kenya
Payment Terms : TT
Looking for suppliers from : Portugal, Germany, Iran, Australia, Canada
Please provide a quotation to the following requirement from importer -
Product Name: Cold Room Storage
Specifications:
COLD STORAGEEQUIPMENT LAYOUT
1 m wide passage
18 kW Evaporator unit
@ 5.0 m height
Evaporator support brackets attached
to building frame/masonry wall
150mm PU wall insulation to 6m height
Controls panel for each
coldroom complete with timers
150mm P U common wall
insulation on either side of the
200mm masonry wall
150mm P U common wall
insulation on either side of the
200mm masonry wall
Sliding Cold room door of 1,000mm wide by 2,000mm high
made from 150mm prefarbricated polyurethane sandwich
panel, 0.5mm pre-painted galvanised steel sheet, stainless
steel hinges, all around rubber gaskets, lockable outer lever
door handle with a push unlocking inner safety mechanism.
