Find Verified Portable And Transport Ventilator Buyers, Importers and Buy Leads

Please quote for the following wholesale product requirement -

Product Name: Personal Protective Helmets

Specifications:
Aramid Ballistic Helmet with side rails and NVG mount.

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : Bank Transfer/LC

Looking for suppliers from : Worldwide

Contact : M Mirsaid

Buyer is interested to receive quotations for the following RFQ -

Product Name: Spare parts kit for CSI 2140 2 Channel Technical Condition Analyzer.

Specifications:
One product package includes:
1 cable for accelerometer 2 PCs
2 accelerometer 2 PCs
2-pole 3 magnet for accelerometer
4 Transport case 1 PCs

5 Set of documentation 1 set.

Design features of the product:

Cable for accelerometer.
The cable is spiral, vibration-resistant, durable, designed to connect the accelerometer to the analyzer. Sealed cable connector with unload tension reduces cable wear.

On one side (one end) of the cable there is a 5-pin M12 plug connector for connection to the analyzer (not explosion-proof). On the other side (second end) of the cable there is a 2-female MIL-DTL-5015 female connector for connecting the accelerometer. Cable length 1,83 m.

2. Accelerometer.

Universal accelerometer with high measurement accuracy and proven multi-point calibration. High-end accelerometer for use with analyzer.

Accelerometer characteristics:

-Sensitivity (± 5%) 100 mV/G (10,2 mV/m/s²)

-Measurement range ± 50g (± 490 m/s²)

-Frequency range (± 3 dB) 0,5-10,000Hz (30-600 000 Imp/min)

-Relative transverse sensitivity = 7%

-Voltage/excitation current 18-28 V DC

-Weight = more than 51 grams (1,8 oz)

-Working temperature from-54 °C to 121 °C

-5000G impact overload limit Max. (49050 m/s²)

3. 2-pole magnet for accelerometer.

The magnet is designed for fastening on the accelerometer.

Specifications 2-pole for accelerometer:

-Small magnet;

-Magnet diameter = 20mm

-Magnet weight = 0,15 kg

-6,35mm threaded hole in magnet

-Curved magnet surface.

4. Transport case.

Durable transport case for a set of accessories.

5. set of documentation.

Spare parts for the 2-channel analyzer are supplied with primary verification of the manufacturer. Primary verification should be recognized in the Republic of Kazakhstan.

Note: Must be included at the time of delivery.

The product is purchased as part of the additional equipment of the vibration analyzer CSI 2140

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Serikbay Nurmakhambetov

Buyer is interested to receive quotations for the following RFQ -

Product Name: Pre-heater 122R-0016126

Specifications:
Pre-heater 122R-0016126
Pre-heater for Toyota Hilux 2011 engine 122R0016126 KUN25L 2KD-FTV
Heat output - 5 kW,
Supply voltage - 12V,
Fuel type - diesel,
Operating range of supply voltage - 9.5 ... 16V,
Fuel consumption - no more than 0.62 l / h,
Coolant - antifreeze,
Power consumption with a pump - no more than 42W,
Power consumption at start-up (100 sec) - 122 W,
Start mode - manual or automatic,
Operating time of one cycle - 20 ... 120 min.,
Weight with all components - no more than 8 kg,
Dimensions - length x width x height 220x90x136 cm,
Includes heater, timer, mounting kit;
Fuel pump, circulation pump, glow plug, electronic components
27. Pre-heater for Toyota Hilux 2011 engine 122R0016126 KUN25L 2KD-FTV

Quantity Required : 27 Set/Sets

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Serikbay Nurmakhambetov

Buyer is interested to receive quotations for the following RFQ -

Product Name: Accelerometer

Specifications:
2. Accelerometer.
Universal accelerometer with high measurement accuracy and proven multi-point calibration. High-end accelerometer for use with analyzer.
Accelerometer characteristics:
-Sensitivity (± 5%) 100 mV/G (10,2 mV/m/s²)
-Measurement range ± 50g (± 490 m/s²)
-Frequency range (± 3 dB) 0,5-10,000Hz (30-600 000 Imp/min)
-Relative transverse sensitivity = 7%
-Voltage/excitation current 18-28 V DC
-Weight = more than 51 grams (1,8 oz)
-Working temperature from-54 °C to 121 °C
-5000G impact overload limit Max. (49050 m/s²)

3. 2-pole magnet for accelerometer.

The magnet is designed for fastening on the accelerometer.

Specifications 2-pole for accelerometer:

-Small magnet;

-Magnet diameter = 20mm

-Magnet weight = 0,15 kg

-6,35mm threaded hole in magnet

-Curved magnet surface.

4. Transport case.

Durable transport case for a set of accessories.

5. set of documentation.

Spare parts for the 2-channel analyzer are supplied with primary verification of the manufacturer. Primary verification should be recognized in the Republic of Kazakhstan.

Note: Must be included at the time of delivery.

The product is purchased as part of the additional equipment of the vibration analyzer CSI 2140

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Serikbay Nurmakhambetov

Please quote for the following wholesale product requirement -

Product Name: U1 Without Shock Absorber

Specifications:
1 pump reserve Qn.st=36,18 m3/ch, H=8,00 m, N=4,0 kW, 400?, 50 Hz.
(1 working pump.+1 reserve.), 1 working pump, complete with control cabinet, valves, collectors. (Hydro EN 32-200/171 S2JS ADL-U1 without shock absorber)

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Beibit