Find Verified Automobile Gas Systems Kits Buyers, Importers and Buy Leads

Buyer is interested to receive quotations for the following RFQ -

Product Name: Pre-heater 122R-0016126

Specifications:
Pre-heater 122R-0016126
Pre-heater for Toyota Hilux 2011 engine 122R0016126 KUN25L 2KD-FTV
Heat output - 5 kW,
Supply voltage - 12V,
Fuel type - diesel,
Operating range of supply voltage - 9.5 ... 16V,
Fuel consumption - no more than 0.62 l / h,
Coolant - antifreeze,
Power consumption with a pump - no more than 42W,
Power consumption at start-up (100 sec) - 122 W,
Start mode - manual or automatic,
Operating time of one cycle - 20 ... 120 min.,
Weight with all components - no more than 8 kg,
Dimensions - length x width x height 220x90x136 cm,
Includes heater, timer, mounting kit;
Fuel pump, circulation pump, glow plug, electronic components
27. Pre-heater for Toyota Hilux 2011 engine 122R0016126 KUN25L 2KD-FTV

Quantity Required : 27 Set/Sets

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Serikbay Nurmakhambetov

Please quote for the following wholesale product requirement -

Product Name: U1 Without Shock Absorber

Specifications:
1 pump reserve Qn.st=36,18 m3/ch, H=8,00 m, N=4,0 kW, 400?, 50 Hz.
(1 working pump.+1 reserve.), 1 working pump, complete with control cabinet, valves, collectors. (Hydro EN 32-200/171 S2JS ADL-U1 without shock absorber)

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Beibit

Please quote for the following wholesale product requirement -

Product : Hifly Radial Pcr Tires

Specifications:
13 And 14 Inches
as per moq

Quantity Required : MOQ

Shipping Terms : cif

Destination Port : Kazakhstan, Kazakhstan

Payment Terms : tt/lc

Looking for suppliers from : Worldwide

Contact : Ivan Viktorovich

Buyer is interested to receive quotations for the following RFQ -

Product Name: Accelerometer

Specifications:
2. Accelerometer.
Universal accelerometer with high measurement accuracy and proven multi-point calibration. High-end accelerometer for use with analyzer.
Accelerometer characteristics:
-Sensitivity (± 5%) 100 mV/G (10,2 mV/m/s²)
-Measurement range ± 50g (± 490 m/s²)
-Frequency range (± 3 dB) 0,5-10,000Hz (30-600 000 Imp/min)
-Relative transverse sensitivity = 7%
-Voltage/excitation current 18-28 V DC
-Weight = more than 51 grams (1,8 oz)
-Working temperature from-54 °C to 121 °C
-5000G impact overload limit Max. (49050 m/s²)

3. 2-pole magnet for accelerometer.

The magnet is designed for fastening on the accelerometer.

Specifications 2-pole for accelerometer:

-Small magnet;

-Magnet diameter = 20mm

-Magnet weight = 0,15 kg

-6,35mm threaded hole in magnet

-Curved magnet surface.

4. Transport case.

Durable transport case for a set of accessories.

5. set of documentation.

Spare parts for the 2-channel analyzer are supplied with primary verification of the manufacturer. Primary verification should be recognized in the Republic of Kazakhstan.

Note: Must be included at the time of delivery.

The product is purchased as part of the additional equipment of the vibration analyzer CSI 2140

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Serikbay Nurmakhambetov

Buyer is interested to receive quotations for the following RFQ -

Product Name: Spare parts kit for CSI 2140 2 Channel Technical Condition Analyzer.

Specifications:
One product package includes:
1 cable for accelerometer 2 PCs
2 accelerometer 2 PCs
2-pole 3 magnet for accelerometer
4 Transport case 1 PCs

5 Set of documentation 1 set.

Design features of the product:

Cable for accelerometer.
The cable is spiral, vibration-resistant, durable, designed to connect the accelerometer to the analyzer. Sealed cable connector with unload tension reduces cable wear.

On one side (one end) of the cable there is a 5-pin M12 plug connector for connection to the analyzer (not explosion-proof). On the other side (second end) of the cable there is a 2-female MIL-DTL-5015 female connector for connecting the accelerometer. Cable length 1,83 m.

2. Accelerometer.

Universal accelerometer with high measurement accuracy and proven multi-point calibration. High-end accelerometer for use with analyzer.

Accelerometer characteristics:

-Sensitivity (± 5%) 100 mV/G (10,2 mV/m/s²)

-Measurement range ± 50g (± 490 m/s²)

-Frequency range (± 3 dB) 0,5-10,000Hz (30-600 000 Imp/min)

-Relative transverse sensitivity = 7%

-Voltage/excitation current 18-28 V DC

-Weight = more than 51 grams (1,8 oz)

-Working temperature from-54 °C to 121 °C

-5000G impact overload limit Max. (49050 m/s²)

3. 2-pole magnet for accelerometer.

The magnet is designed for fastening on the accelerometer.

Specifications 2-pole for accelerometer:

-Small magnet;

-Magnet diameter = 20mm

-Magnet weight = 0,15 kg

-6,35mm threaded hole in magnet

-Curved magnet surface.

4. Transport case.

Durable transport case for a set of accessories.

5. set of documentation.

Spare parts for the 2-channel analyzer are supplied with primary verification of the manufacturer. Primary verification should be recognized in the Republic of Kazakhstan.

Note: Must be included at the time of delivery.

The product is purchased as part of the additional equipment of the vibration analyzer CSI 2140

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Serikbay Nurmakhambetov

The buyer would like to receive quotations for -

Product Name: Cc56 Belt Conveyor Belt

Specifications:
Material: Rubber, Polyester, Cotton, Nylon
Type:cc, Nn, Ep, St
Belt Width:300mm-3200mm

Quantity Required : 1 Forty-Foot Container

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Mukhtar Mussin

The buyer would like to receive quotations for -

Product Name: Gas Oil EN590 10ppm Yearly Contract

Specifications:
Incoterms : 2020
Origin : Non-Russian and Non-Sanction
Quantity : 100 000 Metric Ton in month (yearly contract)

Inspection SGS OR any other International Agency at Loading Port

Quantity Required : 100000 Metric Ton/Metric Tons

Shipping Terms : FOB

Destination Port : Rotterdam,

Payment Terms : Bank Grantee Against POP

Looking for suppliers from : Worldwide

Contact : Irfan Ansari

Buyer is interested to receive quotations for the following RFQ -

Product : Tires For Trucks And Buses

Specifications:
13 And 14 Inches

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Ivan Viktorovich

Please quote for the following wholesale product requirement -

Product Name: Cycloid Gear Reducer

Specifications:
- Gear Motor xld6-11-7. 5kW-2p (incl.oil pump)

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : To be discussed with suppliers

Looking for suppliers from : Worldwide

Contact : Davydenko Igor

The buyer is interested to receive quotations for the following RFQ -

Product Name: Silencer For Ventilation Systems

Quantity Required : 50 - 100 Unit/Units(sample)

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : To be discussed with suppliers

Looking for suppliers from : Worldwide

Contact : Maira Bissenova

The buyer is interested to receive quotations for the following RFQ -

Product Name: Heating Pad Systems (To Put In Delivery Pizza Bag)

Specifications:
- Temperature Of The Heating Pad Should Be A Minimum 95 C Degree.
- Not Interested Less Temperature Than 95 C.

Quantity Required : 500 Piece/Pieces(sample)

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Damir Serikbayev

Please provide a quotation to the following requirement from the importer -

Product Name: Heating Pad Systems (To Put In Delivery Pizza Bags)

Specifications:
Temperature Of the Heating Pad Should Be a Minimum of 95 C Degree. Not Interested Less Temperature Than 95 C.

Quantity Required : 500 Piece/Pieces(sample)

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Damir Serikbayev

The buyer would like to receive quotations for -

Product Name: Farm Irrigation Systems

Specifications :
Like The Sprinkler

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : T/T Or L/C

Looking for suppliers from : Worldwide

Contact : Yerzhan Sugralin

Please provide a quotation to the following requirement from the importer -

Product Name: Portable Multi-Tool Kits

Specifications:
- Allied Tools 49032 25 Pc. Tri-Fold Tool Set
- Length: 23 Inches

Quantity Required : 500 Unit/Units(sample)

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Temuri Tsituri

The buyer would like to receive quotations for -

Product Name: Manifold Bar For Water System

Specifications:
Pressure - 16 Bar.
Max Temperature - 130 Degrees Celsium.
Sub-branch Distance - 100 Mm.

Quantity Required : 2500 Unit/Units

Shipping Terms : CIF/FOB

Destination Port : Kazakhstan, Kazakhstan

Payment Terms : Bank Transfer

Looking for suppliers from : Worldwide

Contact : Bauyrzhan Kusmanov

Please provide a quotation to the following requirement from importer -

Product Name: Gas Compressors

Specifications :
1. Syngas Buster Compressor For Methanol Syntesis.
Suction: Actual Gas Flow 125 M3/hr Pressure 10 Bar
Delivery: Pressure 50 Bar
2. Syngas Recycling Compressor
Suction: Actual Gas Flow 130 M3/hr Pressure 45 Bar
Delivery: Pressure 50 Bar

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : Bank Transfer

Looking for suppliers from : Worldwide

Contact : Almat Japarov

Please quote for the following wholesale product requirement -

Product: Liquefied Natural Gas

Specifications:
High calorific value range: 37 MJ/M3 to 42.1 MJ/M3
CH4 in the gas > 85mol %
Composition in LNG should be less than or equal:
Nitrogen (N2): 0.4 mol %
Ethane (C2): 15 mol %
Propane(C3): 4 mol %
Butane(C4): 2.5 mol %

Quantity Required : 100000 Metric Ton/Metric Tons

Shipping Terms : FOB

Destination Port : Other-Not Shown

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : -Irfan Ansari