Please provide a quotation to the following requirement from importer -
Product Name: Corrugated Carton Boxes
Specifications :
Customized Designs & Size
Note: Contact Via Email Only
Quantity: 300,000 Pieces Each Corrugated Carton Boxes (Need In 12 Different Types)
Quantity Required : 300000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Aqaba, Jordan
Payment Terms : 60 Days from BL Date Bank Transfer
Specifications:
Looking For 2 Types Of Radiator:
1. Cooling Water Heat Exchanger as per the following specifications: (needed quantity : 1)
• Air To Water Heat Exchanger
Ge Part No.: 298a8917p003/298a8917p001. Manufacturer: Aerofin/ Usa.
Headers: Carbon Steel, Outside The Casing.
Tubes: 5/8" Od X .025" Avg Wall Seamless Copper With Bends. Joints: Brazed.
Fins: Aluminum Edgewound At 14 Fpi - Cannot Be Solder 1coated. Casing: Galvanized Steel Sheet.
Conns: 4" Ips Victaulic Carbon Steel (same End).
No. Of Tubes: 208.
No. Of Columns: 8.
No. Of Rows: 52.
No. Of Length: 5.23 M.
Height: 1.17 M.
• Width: 34 Cm.
Quality: Includes Metal Nametag And Pneumatic Test Report.
2. Cooling Water Heat Exchanger As Per The Following Specifications And The Attached Drawing Quantity : 2
• Air To Water Heat Exchanger
• Mfg: Luwa Japan Ltd.
• MFG No.: NGO 244-1
Quantity:
2-3 Piece/Pieces
Specifications:
High Tensile Steel Wire as per the following specs
Bright Plain High Tensile Steel Wire of 7mm Diameter QTY 250 Metric Tons
1) Steel required must be bright plain - high tensile steel wire 7mm diameter and will be used in manufacturing prestressed concrete poles for medium voltage networks.
2) The steel should conform in all respects with the requirements of the latest edition of BS. 5896 or Chinese specifications [prestressed wire 7.00-1570-WLR-P-GB/T 5223/2002] or equivalent.
3) The nominal tensile strength of the steel should be (1570 N/mm2).
4) The steel should be of “Low relaxation “quality, and the wire is pre-straightened and will run out straight form the coil when used at site.
5) No joint is allowed in the wire which should be one piece in the coil.
6) Steel should be supplied in large diameter coils of (1.8 -2.4) m.
7) The weight of Each coil should be approximately 1000 kgs.
8) Good attention should be paid to the packing of each coil to ensure good protection to the steel during loading, shipping, unloading, transportation, and storing at the site of the purchaser. For that, every coil should be tightly wrapped by proper and secure seaworthy packing.
9) Each coil should have a separate label made of steel sheet with a reasonable size. This label should contain the following information: will be given upon production
10) The price should be valid for at least Two Month and must be based on steel NET weight.
